INSTEON 75790 User manual

Insteon Wi-Fi Cameras
Owner’s Manual

Contents
Getting Started
Wi-Fi Camera 4
Overview
Installation 5
Mounting 6
Insteon app for iPhone, iPad and iPod touch
Congure a Camera for Wired Ethernet 8
Congure a Camera for Wi-Fi 13
Add an Already Congured Camera 18
Add a Remote Camera 21
Advanced Camera Conguration 23
Insteon app for Android
Congure a Camera for Wired Ethernet 27
Congure a Camera for Wi-Fi 31
Setup without Insteon Hub
Congure a Camera for Wired Ethernet 37
Congure a Camera for Wi-Fi 42
Web Browser Interface
Web Interface 49
Firmware Update 51
Factory Reset
Appendix
Specications 55
Troubleshooting 57
Certications and Warnings 58
Declaration of Conformity 59
Product Warranty 60

3
Everything you need to quickly get up and running.
Getting Started

4
BackFront
Overview
Wi-Fi Camera
Microphone
10/100 Ethernet
External Microphone
External Speaker
IR LEDs
5V Power
Wi-Fi Antenna
Day/Night Sensor

5
Camera ConnectionsOutlet Connections
Installation
Connect the antenna, ethernet cable and DC
power connector to your camera.
Connect the power adapter to an outlet and
connect the ethernet cable to your router.
Wi-Fi Camera

6
Mounting Bracket
Mounting
Mount the optional bracket using screws and wall
anchors. You can position the camera right-side
up or upside down.
?Dierent wall materials require dierent screws
and anchors. Use the appropriate type for
your mounting surface. Drywall screws and
anchors have been provided. Use caution
when drilling holes in walls that may contain
live electrical wires.
Wi-Fi Camera

7
Use the Insteon app to congure and control your Insteon Wi-Fi Camera.
The Insteon app requires Insteon Hub (2242-222) or (2245-222).
Insteon app for iPhone, iPad and iPod touch

8
Congure a Camera for Wired Ethernet
iPhone, iPad and iPod touch
Launch the Insteon App.
Tap Camera. Select the camera that you
would like to congure.
Tap Add a Device.Tap the drawer icon or swipe from
the right edge of the display to
open the drawer.
If you have not already done so,
connect your camera to power and your
router using the supplied ethernet cable.
It can take up to two minutes for your
camera to complete its startup process.
When ready, tap Next.

9
Congure a Camera for Wired Ethernet
iPhone, iPad and iPod touch
Give your camera a user name and
password. This information is used
to secure your camera.
When ready, tap Next.
To see your camera when you are away
from home, you will need to congure
manual remote access. Write down the
IP Address displayed at the bottom of the
screen and tap Next.
Wait while your camera’s
settings are updated.
Select Use Wired Ethernet
and then tap Next.
Name your camera, select an icon
and add it to a room.
?The maximum
password length is 12
characters
The password must
contain letters and
numbers only; no
special characters
(!@#$%^&*, etc.) are
permitted
The password cannot
contain spaces
If the Next button
is disabled, your
password does not
meet the password
restrictions.

10
Congure a Camera for Wired Ethernet
iPhone, iPad and iPod touch
Scroll down and tap Port. Return to Settings by dismissing
Edit Camera and Add Device.
Tap House.
Change the port from 80 to 25106.
If you are setting up more than one
camera, increase the port number
for each successive camera to
ensure that every camera has a
unique port number.
When ready, tap Done.