Intel MAT-880 User manual

MAT-880
Socket 479 Pentium®M
Intel®855GME 5.25” SBC
USER’S MANUAL
Version 1.0

ii MAT-880 User’s Manual
Acknowledgments
Award is a registered trademark of Award Software International,
Inc.
PS/2 is a trademark of International Business Machines
Corporation.
Intel and Pentium are registered trademarks of Intel Corporation.
Microsoft Windows is a registered trademark of Microsoft
Corporation.
Winbond is a registered trademark of Winbond Electronics
Corporation.
All other product names or trademarks are properties of their
respective owners.

MAT-880 User’s Manual iii
Table of Contents
Introduction....................................................... 1
Product Description.......................................................... 1
Checklist .......................................................................... 2
MAT-880 Specifications................................................... 3
Board Dimensions............................................................. 4
Installations....................................................... 5
Installing the CPU ............................................................ 6
Installing the Memory....................................................... 7
Setting the Jumpers........................................................... 8
Connectors on MAT-880................................................. 14
Watchdog Timer Configuration....................................... 26
BIOS Setup...................................................... 30
Drivers Installation..................................... 54
Intel Chipset Software Intallation Utility ......................... 55
VGA Drivers Installation................................................ 57
AC97 Codec Audio Driver Installation............................ 58
Intel PRO LAN Drivers Installation................................ 59
Appendix........................................................... 60
A. I/O Port Address Map................................................ 60
B. Interrupt Request Lines (IRQ).................................... 61

iv MAT-880 User’s Manual
This page is intentionally left blank.

INSTALLATIONS
MAT-880 User’s Manual 1
Introduction
Product Description
MAT-880 Pentium®M 5.25” embedded board incorporates the Intel
®
advanced 855GME Chipset that supports processors from 900MHz to
1.6MHz in both 478 or 479-ball Micro-FCBGA package with a front
size bus of 400MHz.
Graphics display functionality is provided by the integrated-chipset
VGA controller that supports CRT display and LVDS interface with
24-bit panel specifications. Ethernet connectivity comes from the
ICH4-integrated Ethernet 10/100 Ethernet controller and a secondary
LAN using an Intel 82541GI Gigabit Ethernet.
Two DDR DIMM sockets supports up to 2GB of memory. Four COM
ports are supported, with COM3 and COM4 with a Fintek F81216D I/O
controller. There are two IDE connectors –IDE1 supporting
UDMA33/66/100 and IDE2 with UDMA33 while supporting a CF Type
II socket for its slave channel.
Other I/O features include two Serial ATA ports, 4-in 4-oout digital I/O
and four USB ports using pin headers. Expansion slots composed of one
PCI and one Mini PCI slot. The 5.25”disk-size board uses a 20-pin ATX
power.
This board represents the perfect choice for those who want superior
performance for various low-power embedded applications.

INSTALLATIONS
2MAT-880 User’s Manual
Checklist
Your MAT-880 package should include the items listed below.
•The MAT-880 Pentium M embedded board
•This User’s Manual
•1 CD containing chipset drivers and flash memory utility
•Optional cables such as:
•1 slim FDD Ribbon Cable
•1 Audio Cable
•2 IDE Ribbon Cables (40-pin & 44-pin)
•1 COM Port Cable
•1 Printer Port Cable
•1 PS/2 Keyboard/Mouse Cable
•1 VGA Cable

INSTALLATIONS
MAT-880 User’s Manual 3
MAT-880 Specifications
Form Factor 5.25-inch Disk-Size
CPU Type Intel Pentium®M Processor, Ultra Low Voltage, at HFM
core frequency of 900 MHz ~ 1.6GHz, 478 or 479-ball
Micro-FCBGA Package
CPU Voltage 0.700V~1.708V
System Speed 900M~1.7GHz
CPU Frequency 400MHz
Green /APM APM1.2
Chipset
Intel®82855GME Chipset
GMCH: 82855GME,732-pin Micro-FCBGA
ICH4: 82801DB,421-pin BGA, FWH
BIOS Award BIOS,supportsACPI function
Cache 1M Level 2 cache
VGA Intel®855GME integrated, support CRT pin header &
LVDS interface (Max. 24bit)DF13 Socket x2
DVI Port Chrontel CH7301,Support TMDS (DF11 Socket X1)
LAN 1. ICH4 integrated LAN controller (10/100Mb) + Phy
82562ET pin header
2. Intel 82541GI LAN (10/100/1000Mb) pin header
Audio ICH4 built-in Sound controller + AC97 Codec ALC650
6-Channel(Line-in, Line-out, MIC) pin header
Memory type
2 x DDR 184-pin DIMM 2.5V (DDR200/266/333MHz),
Max. capacity -2GB, support ECC function
LPC I/O Winbond 83627HF: IrDAx1 Parallel x1, COM1 (RS-232),
COM2 (RS-232/ RS422/RS485), FDC 1.44MB (Slim),
Hardware monitor (3 thermal inputs, 6voltage monitor
inputs, VID0-5, 2 fan header)
Secondary I/O Fintek F81216D COM3 & COM4 (RS-232) (40pin header
COM1~4)
RTC/CMOS ICH4 built-in
Battery Lithium Battery
KB Controller Winbond 83627HF built-in keyboard controller
IDE ICH4 built-in, IDE1,40-pin box header (UDMA 33/66/100)
IDE2 Master channel 44-pin 2mm (UDMA 33)
Compact Flash Type II, 1 port using IDE2 Slave channel
Serial ATA Sil3512 support 2 ports
Digital I/O 4-in 4-out, 2x5 pin header
USB 4ports, USB 2.0,2x4 pin header x2
Watchdog Timer Yes (256 segments, 0,1,2…255. sec/min)
Power Connector 20-pin ATX power input
System Voltages +5V, +12V, -12V, 5VSB
Expansion Slots PCI slot x1 (Supports 2 Bus Master), Mini PCI slot

INSTALLATIONS
4MAT-880 User’s Manual
Board Dimensions

INSTALLATIONS
MAT-880 User’s Manual 5
Installations
This section provides information on how to use the jumpers and
connectors on MAT-880 in order to set up a workable system. The topics
covered are:
Installing the CPU ............................................................ 6
Installing the Memory....................................................... 7
Setting the Jumpers........................................................... 8
Connectors on MAT-880................................................. 14
Watchdog Timer Configuration....................................... 26

INSTALLATIONS
6MAT-880 User’s Manual
Installing the CPU
MAT-880 board supports a Socket 479processor socket for Intel
®
Pentium®M or Celeron®M processors.
The processor socket comes with a screw to secure the processor. As
shown in the left picture below, loosen the screw first before inserting
the processor. Place the processor into the socket by making sure the
notch on the corner of the CPU corresponds with the notch on the inside
of the socket. Once the processor has slide into the socket, fasten the
screw. Refer to the figures below.
NOTE:
Ensure that the CPU heat sink and the CPU top surface are in
total contact to avoid CPU overheating problem that would
cause your system to hang or be unstable.