Intelbras UnniTI 1000 User manual

Installation guide
UnniTI recording card
English

UnniTI recording card
Congratulations, you have just purchased a product with Intelbras quality and safety.
The UnniTI recording card is an accessory card that can only be used in UnniTI telephone exchanges,
allowing the recording of up to 30 simultaneous channels1. Audio les are stored on a Micro-SD² card
or a USB ash drive, connected to the card itself.
The UnniTI recording card is not supplied with the control unit.
For more information on conguring the UnniTI recording card, conguring/reading recordings3
and approved Micro-SD cards/USB Connection, consult the user manual of the UCR - Intelbras Call
Recorder on the website www.intelbras.com.br.
1
For recordings of audio channels it is necessary to purchase the usage license.
2
Micro-SD card, item not included and required for recording.
3
UCR software – Intelbras Call Recorder is required.

Care and safety
Attention!
Only an authorized technician can open the PBX cover, as well as connect and handle its interfaces.
Carefully read all equipment information and follow all safety information.
»Always consult a superior or immediate supervisor before starting work, informing the necessary pro-
cedures to perform the requested service and the necessary safety precautions.
»Turn off system power during interface assembly or removal services.
»Connect the grounding conductor to the system involved before starting. Never operate the equipment
with the grounding conductor disconnected!
To avoid electrostatic damage to the UnniTI recording card, observe the following precautions:
Attention!
Static electricity can damage the board’s electronic components. This type of damage can be irreversible or
reduce the life expectancy of the device.
»Use an antistatic wrist strap, or similar, to handle the card.
»Transport and storage must only be carried out in static-proof packaging.
»Place the card on a grounded surface when you take it out of the packaging.
»Avoid touching the pins of integrated circuits or electrical conductors.
»Always be properly grounded when touching the board or any component.

Summary
1. Technical specications 5
2. Product 5
3. Installation 6
3.1. Cadence of LEDs...................................................................7
4. Basic usage 7
5. Homologated micro-SD card 7
Warranty term 8

5
1. Technical specications
UnniTI 1000 UnniTI 2000 / 3000
Connection
Micro-SD card (SDHC or SDXC type, class 10 or higher)
USB Type A 1.0 / 2.0
Fast Ethernet RJ45 10/100 Mbps
Dimensional (W × H × D) 17 × 69 × 93 mm 105 × 25,5 × 254 mm
Weight 45 g 155 g
Recommended temperature 0 ºC to 45 ºC
2. Product
1. Ethernet connection slot
2. USB Slot for Pendrive
3. LED Status
4. LED Read
5. Micro SD card slot
1
2
3 4
5
Engraving plate UnniTI 1000

6
1 4 2 3
5
Engraving plate UnniTI 2000/3000
3. Installation
This board can only be connected to the UnniTI control panel, version 22.11.01 or higher.
To connect the UnniTI recording card follow the procedure:
1. Disconnect the AC power from the UnniTI panel and in the UnniTI 1000 model, remove the cover;
2. The engraving plate must be installed as shown in the items below:
»UnniTI 1000: must be installed in the OPC slot;
»UnniTI 2000 / 3000: can be installed in the numbered slots.
3. Insert an approved micro-SD card (item 6. Approved micro-SD card ) into the recording card or a USB
ash drive;
4. Replace the cover and turn on the AC power to the UnniTI 1000 panel. Turn on the power to the UnniTI
2000/3000 panel.
5. Plug the network cable into the Ethernet port. For more information about the access conguration,
consult the UCR user manual at www.intelbras.com.br.

7
3.1. Cadence of LEDs
LED Action Description
Status
Flashing fast Card not initialized
Flashing slowly Board initialized
Wiped out Defective board
Read Flashing Active SD card
Important:
»Only one form of storage should be used: micro-SD or USB;
»Before using/exchanging a micro-SD card or Pendrive, it is mandatory to format it via the UnniTI
central web programmer;
»Check the formatting process through the UCR - Intelbras Call Recorder manual.
4. Basic usage
For more information on conguring the UnniTI recording card and making recordings, consult the
UCR - Intelbras Call Recorder user manual on the website www.intelbras.com.br.
5. Homologated micro-SD card
Type SDHC and SDXC, class 10 or higher.
Approved manufacturers: Intelbras (WD Purple)®, Kingston®, SanDisk®, Transcend®, Toshiba®,
Samsung®e Panasonic®.

8
Warranty term
It is established that this warranty is granted upon the following conditions:
Client’s name:
Client’s signature:
Invoice number:
Date of purchase:
Model: Serial number:
Retailer:
1. All the parts, pieces and components of the product are guaranteed against possible manufacturing defects,
which may arise, for the term of 1 (one) year - this being 90 (ninety) days of legal guarantee and 9 (nine) mon-
ths contractual warranty –, counting from the date of purchase of the product by the Consumer, as appears in
the product purchase bill of sale, which is an integral part of this Term throughout the domestic territory. This
contractual warranty includes the free exchange of parts, pieces and components which have a manufacturing
defect, including the expenses with labor used in this repair. If there is no manufacturing defect, but defect(s)
arising from misuse, the Consumer shall bear these expenses.
2. The installation of the product shall be executed in accordance with the Product Manual and/or Installation Gui-
de. If your product requires the installation and conguration by a qualied technician, seek a suitable specialized
professional, the costs of these services not being included in the product amount.
3. Having perceived the defect, the Consumer shall immediately contact the nearest Authorized Service which appears
in the report offered by the manufacturer – they are the only ones authorized to examine and remedy the defect
during the warranty term foreseen herein. If this is not respected, this warranty shall lose its validity, as it shall be
characterized as product infringement.
4. If the Consumer requests home service, it shall contact the nearest Authorized Service to inquire about the technical
visit rate. If it is necessary to remove the product, the ensuing expenses, such as those of transportation and insu-
rance of the taking and return of the product, shall be the Consumer’s responsibility.
5. The warranty shall lose its validity totally in the occurrence of any of the following cases: a) if the defect is not one
of manufacture, but is caused by the Consumer or by third parties foreign to the manufacturer; b) if the damage to
the product arises from accidents, disasters, agents of nature (lightning, oods, landslides, etc.), humidity, voltage
in the electrical network (excess voltage caused by accidents or excessive uctuations in the network), installation/
use in disagreement with the user’s manual or arising from natural wear of the parts, pieces and components; c) if
the product has undergone effects of a chemical, electromagnetic, electrical or animal (insects, etc.) nature; d) if
the serial number of the product has been falsied or erased; e) if the appliance has been infringed.
6. This warranty does not cover loss of data; therefore, it is advisable that if it is the case of the product, the Consumer
makes a backup regularly of the data which appears in the product.
7. Intelbras is not responsible for the installation of this product, or for possible attempts at fraud and/or sabotage in
its products. Maintain the updates of the software and applications used up-to-date, if it is the case, as well as the
network protection required for defense against hackers. The equipment is guaranteed against defects in its usual
conditions of use, it being important to bear in mind that, as it is electronic equipment, it Is not free of fraud and
scams which may interfere with its correct functioning.
8. After its useful life, the product must be delivered to an authorized Intelbras service center or directly disposed of
in an environmentally appropriate manner to avoid environmental and health impacts. If you prefer, the battery, as
well as other unused Intelbras brand electronics, can be disposed of at any Green Eletron collection point (waste
management facility to which we are associated). If you have any questions about the reverse logistics process,
please contact us at (48) 2106-0006 or 0800 704 2767 (Monday to Friday 8am to 8pm and Saturdays 8am to 6pm)
or via -mail [email protected].
9. LGPD - General Law for the Protection of Personal Data: Intelbras does not access, transfer, capture or carry out any
other type of processing of personal data of this product.
These being the conditions of this complementary Warranty Term, Intelbras S/A reserves the right to
alter the general, technical and esthetic features of its products without prior notice.
All the images of this manual are illustrative.
Kingston is a registered trademark of Kingston Technology Company. SanDisk is a registered trademark of SanDisk Corporation. Transcend
is a registered trademark of Transcend Information, Inc.

01.22
Made in Brazil
Customer Support: (48) 2106 0006
Forum: forum.intelbras.com.br
Support via chat: chat.intelbras.com.br
Support via e-mail: supor[email protected]
Customer Service: 0800 7042767
Where to buy? Who installs it? 0800 7245115
Produced by: Intelbras S/A – Indústria de Telecomunicação Eletrônica Brasileira
Rodovia SC 281, km 4,5 – Sertão do Maruim – São José/SC – 88122-001
CNPJ 82.901.000/0014-41 – www.intelbras.com.br | www.intelbras.com