Intellinet 516624 User manual

Internet Broadband Mini Router/Internet
Broadband Router
Quick Installation Guide

Introduction
Thanks for purchasing Internet Broadband Mini Router/Internet Broadband Router. With it, you can
share one connection simultaneously with other users. It supports ADSL / Cable through its WAN port
via ADSL/Cable modem . The WAN port has a bandwidth of 10Mbps faster than a common modem. It
also acts as a secure barrier between the private LAN and the public Internet to prevent break-ins of
outsider, as well as to filter incoming data from Web sites.
The additional feature of Internet Broadband Mini Router and Internet Broadband Router is its
10/100M N-Way Switch function. It is expandable by cascading two or more switches together by
connecting any RJ-45 ( MDI/MDIX ) auto crossover (Internet Broadband Router only) port on the
router to another one. .It also uses store-and-forward switching scheme capability to support rate
adaptation and ensure data integrity.
This quick installation guide covers package contents, front panel, rear panel, installation instructions,
and technical specification.
Please also refer to the attached diskette for comprehensive setup instructions and hardware
specifications.
Package Contents
The package contains the following basic items:
- One Internet Broadband Mini Router and Internet Broadband Router
- One DC power adapter
- One companion diskette containing Web-based user manual and setup program
- One RS-232 cable
-This Quick Installation Guide
If any item is damaged or missing, please contact your supplier.
1

Front Panel
Internet Broadband Mini Router
Internet Broadband Router
Rear Panel
Internet Broadband Mini Router
Reset---------------------
2
POWER
COMLNK
COMACT.
WANLNK/ACT.
LNK/ACT.
LAN
LAN10/100M
LANFDX
Internet Broadband Router
W/4 Port 100/10M Switch
Act .
Li nk/A ct .
Act.
Li nk/Act.
567
UP-Link
Internet Broadband Rout er
W/8 Port 10 0/10 M Sw it ch

Internet Broadband Mini Router
Internet Broadband Router
ResetToFactoryDefault
STEP 1. When the Router power is on within two seconds.
STEP 2. Please keep pushing the Reset bottom from the Com port Link
LED twinkle quickly to it put out.
STEP3.Rightnow,yourRouterhasdoneResetToFactoryDefault?
completely.
Setting Up The Network Environment
This quick installation guide assumes that you have installed an Ethernet network device in your pc.
Connecting to Ethernet
Connect Internet Broadband Mini Router and Internet Broadband Router RJ-45 ports to Ethernet
interface of workstation as shown as below.
5
POWER 1
234 COM WA N POWER
1
2
34
COM WA N
56
7
Up-Li nk
One of LAN
RJ-45 Ports
Ca t. 5 ne two rk
Cable
Cable Modem or
DSL Mod em
The
Internet
WAN RJ-45 Port
PC
Intern et Broadband Mi ni Router/
Internet Broadband Router

4Basic TCP/IP Settings
Prior to software configuration, each PC on your LAN must be configured as follows in order to
communicate with Internet Broadband Mini Router/Internet Broadband Router properly.
Otherwise, the Router won be reachable by the PC even though there is a physical link
between them.
l From your Windows95/98/NT, click Start, choose Settings and select Control Panel.
l Then double-click the Network icon.
l In the Network window Configuration tab, select TCP/IP and click the Properties
button.
A TCP/IP Properties window will appear.
l Click the IP Address tab and select Obtain an IP address automatically.
l Click DNS Configuration tab and select Disable DNS.
l Click WINS Configuration tab and select Disable WINS Resolution.
l Click OK to restart your computer
4

4IP Configuration
Windows95/98
Start up your Windows95/98, please follow the next procedure to get a
valid IP address for your workstation from Internet Broadband Mini Router
/Internet Broadband Router.
l Power on Internet Broadband Mini Router/Internet Broadband
Router click Start, then Run,type WINIPCFG, then OK.
l Click Release All button to erase current settings, then click Renew All to get IP-related
information from the Router DHCP server.
l Click OK to close the window.
5

FCC Warning
This equipment can generate, use and radiate radio frequency energy and, if not installed and
used in accordance with the instructions in this guide, may cause interference to radio
communications. This equipment has been tested and found to comply with the limits for a
Class A computing device pursuant to Subpart J of Part 15 of the FCC rules, which are designed
to provide reasonable protection against radio interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause interference, in
which case the user, at his own expense, will be required to take whatever measures are necessary
to correct the interference.
CE Declaration of Conformity
This equipment complies with the requirements relating to electromagnetic compatibility, EN
55022 class A for ITE and EN 50082-1. This meets the essential protection requirements of the
European Council Directive 89/336/EEC on the approximation of the laws of the Member States
relating to electromagnetic compatibility.
Trademarks
All company, brand, and product names are trademarks or registered trademarks of their respective
companies.
6

1-Year Warranty
The manufacturer warrants to the original consumer /purchaser free from defects in materials or
workmanship for limited time from the original factory shipment date.
KEEP THIS STUB FOR YOUR RECORDS
Model: Serial:
DatePurchased:
WherePurchased:
From Whom:
DISTRIBUTOR
WARRANTY REGISTRATION CARD
Please complete this form and return it within 10 days of purchase to validate warranty
Name/Title:
Company:
Address:
Tel. No.:
Signature:
PurchaseModel: SerialNo.:
Purchase from:
Address:
DateofPurchase:
7

WindowsNT/2000
lPoweronInternetBroadbandMiniRouter/InternetBroadbandRouter,
click Start, then Program, Accessories, then MS-DOS Promp.
lA DOS window appears. Type IPCONFIG on the DOS command line.
lThe window will show information about Adapter Address , IP Address, Subnet Mask, and
Default Gateway. Type IPCONFIG/release to erase the current settings. Then type
IPCONFIG/renew to get IP-related information from the Router DHCP server.
lClick OK to close the window.
Internet Broadband Mini Router/Internet Broadband Router Configuratio
Via Web Browser
l Double click Web Browser icon.
lType http://192.168.16.1 into the location bar. A window will show up, prompting for requesting
Username and Password.
lThen enter admin in the username field, 123 in the password field.
lThen click OK.
8

l After your login request is verified, the router configuration homepage will appear.
lClick Quick Install button on the left.
Now, you have completed the basic set up for connecting to your LAN. For advanced/custom
configuration, please refer to user manual in attached diskette for more details.
9