Inter-m PSI-5240IRQ User manual

Operation Manual
(Webpage Setting)
Digital PA System
PSI-5240IRQ

DIGITAL PA SYSTEM
Cont nts
Cont nts
W bpag S tting............................................................................................................................1
Ⅰ. Initial Web network setup..............................................................................................................1
Ⅱ. 1 Common Screen.......................................................................................................................4
Ⅱ. 2 Audio Setup ........................................................................................................................5
Ⅱ. 3 Network Setup.....................................................................................................................6
Ⅱ. 4 Time Setup ..........................................................................................................................7
Ⅱ. 5 View Log.............................................................................................................................8
Ⅱ. 6 System Management............................................................................................................9
Ⅱ. 6. 1 System Upgrade...........................................................................................................9
Ⅱ. 6. 2 Password Change.......................................................................................................10
Ⅱ. 6. 3 System Check Setup....................................................................................................11
Ⅱ. 6. 4 Restart System ............................................................................................................12
Ⅱ. 6. 5 Factory Set System......................................................................................................13

W bpag S tting
W bpag S tting
Ⅰ. Initial W b N twork S tup
Ⅰ.1 Initial network device configuration information
Ⅰ.2 Items to Prepare
a. Computer to connect to device’s web page. (laptop, PC,etc.)
b. Cross cable or Straight cable.
Ⅰ.3 How to Connect
a. Connect the device to computer using either cross or straight cable.
b. Set the computer’s network in order to comm.
c. Unicate with the device and to each other.
※If the computer’s wireless network is turned on, turn it off and proceed.
※Please download the latest version of the manual as manual may change depending on the firmware
version. (www.inter-m.com)
DIGITAL PA SYSTEM
1
PSI-5240IRQ
DHCP NO IP Address 192.168.1.99
Netmask 255.255.255.0 Gateway 192.168.1.1
DNS1 192.168.32.130 DNS2 192.168.32.132

DIGITAL PA SYSTEM
2PSI-5240IRQ
d. Use (Internet Explorer, Chrome, etc.) browser and by entering device’s URL in address bar to connect.
※Press button on the front panel for 2 seconds and URL information is displayed on theDisplay
screen.
※Please use the browser versions as follows.
e. After connecting, a pop-up window will appear asking for access password. Input as shown below.
※For security reasons, the equipment should be used only after a change of password.
※The menus that can be accessed by each user accounts are the below.
Problems connecting?
①Make sure the cable is in good working order.
②Make sure that you are able to “ping” the PSI-5240IRQ from the network device.
(If there is no response, rework the network configuration)
③Make sure equipment is turned on.
Windows Explorer Browser version 10 or higher.
Chrome Browser version 36 or higher.
Firefox Browser version 31 or higher.
Safari Browser version 6.1 or higher.
USER ID PASSWORD
admin 1
user 1

DIGITAL PA SYSTEM
3
PSI-5240IRQ
f. Click the Network Settings menu in the left navigation pane to configure the network setting of the
PSI-5240IRQ.
USER ID : admin USER ID : user

DIGITAL PA SYSTEM
4PSI-5240IRQ
Ⅱ. 1 Common Scr n
①Name of the device connected to the web is displayed.
②Set the language of the web page.
③Displays the information of web connected device. (Device Name/Device IP/Web Version)
④ Menu available from the web page.
⑤ Corresponding screen is displayed when menu is selected.
①②③④⑤Downloaded from www.Manualslib.com manuals search engine

DIGITAL PA SYSTEM
5
PSI-5240IRQ
Ⅱ. 2 Audio S tup
Above is the screen that is displayed when [Audio Setup] is clicked.
①Current state of audio client is displayed.
②Press [Reset] button to reset server IP address of audio, server port and name of host.
③Operation information of audio client is displayed on the screen.
④Currently connected server information of audio stream is displayed.
⑤Name of host and real-time audio is displayed, and volume control is available. ①②③④⑤Downloaded from www.Manualslib.com manuals search engine

DIGITAL PA SYSTEM
6PSI-5240IRQ
Ⅱ. 3 N twork S tup
Above is a screen display when [Network Setup] menu is clicked.
①The MAC address of the device is displayed.
②The Host Name of the device is displayed.
③Device location can be typed here.
④Can see the network configuration settings of the device and also set the desired information.
⑤Click [Apply] button to apply the modified information from steps ②and ③and ④.
⑥Click [Initialize] button to reset the modified information from steps ②and ③and ④.
⑦[Network Setup] Help & Tips are displayed. ①②③④⑦⑥⑤Downloaded from www.Manualslib.com manuals search engine

DIGITAL PA SYSTEM
7
PSI-5240IRQ
Ⅱ. 4 Tim S tup
Above is a screen display when [Time Setup] menu clicked.
①Displays the time zone set on the device and can change the time zone.
②Displays the current time in the device.
③User can select Manual or Automatic setup to select time setting.
※Manual Setup: Enter the time manually to set.
※Automatic time synchronization: Synchronizes with the server time to set device’s time. Can set
Periodic time to synchronize the clock.
(ex: If set for 15:00 hour, at every 3:00 pm, synchronization sets the time on the device.)
④Click [Apply] button to apply the set time.
⑤[Time Setup] Help & Tips are displayed. ①②③⑤④Downloaded from www.Manualslib.com manuals search engine

DIGITAL PA SYSTEM
8PSI-5240IRQ
Ⅱ. 5 Vi w Log
Above is a screen display when [View Log] menu is clicked.
①Logs generated during the operation are displayed.
②Click [Download the log] button to save log information as a file.
③Click [Refresh] button to reload the log.
④Click [Clear Log] button to clear the log information.
⑤[View Log] Help & Tips are displayed. ②③④①⑤Downloaded from www.Manualslib.com manuals search engine