Interactive Technologies SceneStation 3 User manual

Interactive Technologies, Inc.
5040 Magnolia Creek Drive
Cumming, GA 30028 USA
678-455-9019 (Phone)
678-455-9071 (Fax)
Professional Entertainment and Architectural Lighting Control Products
For additional product information and support:
www.interactive-online.com
SceneStation 3™
Advanced Architectural DMX Playback Station
Thank you for purchasing SceneStation.
To reduce paper consumption and to make sure you are
receiving the latest product information available, all
documentation, software, videos and examples for installing
and programming SceneStation are available from our web
site.
Please visit:
www.interactive-online.com/docs
About SceneStation
SceneStation is an advanced DMX playback controller that’s
designed to t into a single-gang electrical wall box and also
comes in a rugged portable version. SceneStation can be
operated by the ve customizable buttons on it’s face or via one of
two different styles of infrared remote controls.
To program SceneStation, you can use the free SceneStation Studio software (using a USB RF Adaptor),
or the IR Programmer’s Remote, or by recording snapshots from an external DMX source using just the
front-panel of the station.
The SceneStation User’s Manual contains information about installing, setting up and programming
SceneStation as well as several detailed programming examples and technical information about the
station hardware.
Need Help?
Please visit our web site for technical information, programming details and more. If you still have a
question or simply would rather speak to one of our support staff about SceneStation, please do not
hesitate to get in touch with us.
Email: [email protected]
Phone: [phone]
D0313B

Recommended DMX-512 Cable Types CAT5E or CAT6
White/Brown =DMX Ground (Black) Orange =DMX Data - (Brown) White/Orange =DMX Data + (Red) Others =Unused
Belden 9842
Drain Wire =DMX Ground (Black) Blue/White =DMX Data - (Brown) White/Blue =DMX Data + (Red) Orange/White =Unused White/Orange =Unused
Other similar 100-120 ohm twisted-pair RS-485 compatible computer
communication cable may be used.
Interactive Technologies, Inc.
5040 Magnolia Creek Drive
Cumming, GA 30028 USA
678-455-9019 (Phone) • 678-455-9071 (Fax)
www.interactive-online.com
Drawn By: Rob Johnston Date: 11/20/2012 Checked: Rob Johnston Scale: 1:1 Units: Millimeters [Inches]
Revision
B
D0316: SceneStation Typical Wiring Diagram
DMX-512 Port
DMX Ground (Black)
DMX Data - (Brown)
DMX Data + (Red)
Optional DMX Input
Connect to First DMX Fixture, Dimmer or Power Supply. DMX signals then daisy-chain through each unit.
DMX Output
Optional input from DMX console or controller.
Power Input (Non-Polarized)
SceneStation
Model SS-305
Class 2 Power Supply
11-28 VDC (5W minimum)
14-28 VAC (5VA minimum)
Optional Remote Station
DMX Output
(optional)
One or more remote stations may connect to a master station via 2.4GHz wireless link.
* See table for
recommended DMX cable types.
DMX Input Note: SceneStation uses a bi-directional DMX Port for both DMX Input and Output. If no Input DMX signal is detected, SceneStation will output a DMX signal. If an Input signal is detected (from another console or
controller), SceneStation will automatically go into "passive" mode, which allows the
upstream controller to be in full control of
the DMX fixtures. SceneStation also uses this mode to record DMX scenes from the external source.
18-22 AWG 2-Conductor
Electrical Box
Power Supply
Power