Intercoax FLX-11 Series User manual

Package
FLX-11T (Transmitter)
FLX-11R (Receiver)
Bracket Quick Start
Guide
Hardware Overview
Right
Left
57V DC
Bracket
PWR
LINK/ACT
Ethernet
LINK/ACT PoE
Bracket
상태 표시등 DC 전원 어댑터
상태 표시등
LINK/ACT PoE
상태 표시등
RJ-45
RJ-45
Status LED Indicator
LINK/ACT
Status LED Indicator
PoE
DC Power JackStatus LED Indicator
Overview
FLX-11 Series are High-Speed, long reach Ethernet & PoE extender
that makes possible to transmit the Ethernet signal and PoE up to
500m through UTP(Cat 5e or better)cable.
It is cost-effective and time saving solution to migrate existing
analog system to IP based system since FLX-11 series support easy
installation utilizing the existing UTP cable or UTP bundle cables.
With long reach transmission feature, the device makes to overcome
100 meters distance limitation easily and reduces the construction
cost significantly compared with fiber optic configuration.
Features
Long reach Ethernet & PoE extension over existing
UTP(Cat 5e or better) cable
Data + Power over UTP(Cat 5e or better) cable
Data and PoE distance up to 500 m
100Mpbs Full Duplex
Support PoE, PoE+ PSE output to PoE Camera.
(FLX-11T model only)
Support PoE, PoE+ PD input (25.5W) from PoE Switch / PoE NVR
(FLX-11R model only)
Multicast supported
LED Indication (Data, Power)
Plug & Play
Surge Protection
Compact design
Quick Start Guide
FLX-11T / FLX-11R
Please carefully read the instruction manual before use. Depending
on the model, the image and the actual look of the product may vary.
* Please visit our website www.intercoax.com
to download Manual.
Installation Guide
1. Connect UTP cable (Cat5e or better) from PoE Switch/NVR to
FLX-11R(Ethernet). Check LEDs on FLX-11R.
Ethernet cable
(Cat5e or better)
Ethernet cable
(Cat5e or better)
PoE Switch/NVR
Check LEDs
Check LEDs
Ethernet cable
(Cat5e or better)
2. Connect UTP cable (Cat5e or better) from FLX-11R(Flexia) to
FLX-11T(Flexia).
Ethernet cable
(Cat5e or better)
Ethernet cable
(Cat5e or better)
PoE Switch/NVR
Check LEDs
Check LEDs
Ethernet cable
(Cat5e or better)
3. Connect UTP cable (Cat5e or better) from FLX-11T(Ethernet) to IP
Camera (PoE Model Only). Check LEDs on FLX-11T.
Ethernet cable
(Cat5e or better)
Ethernet cable
(Cat5e or better)
PoE Switch/NVR
Check LEDs
Check LEDs
Ethernet cable
(Cat5e or better)
Rev.1.0
LED Indicators
Indicator Color Function
PWR DC Link (PoE or DC Power adapter)
LINK/ACT On/Blinking : Data Link/Act ( UTP Flexia Line)
LINK/ACT On/Blinking : Data Link/Act ( Ethernet Line )
PoE PoE Output On

Caution
DO NOT USE Non-PoE camera on Tx. (PoE IP Camera Only)
Please install the device following the installation guide.
Do not touch the device and cable with wet hands.
Keep away from moisture and shock.
Do not install near any heat sources such as radiators, heat
registers, stoves or other apparatus that produce heat.
Indoor use only. (Use waterproof junction box when it is used in
outdoor)
Do not use for other purposes.
Do not disassemble or modify this device.
Do not put any sticker or paint on it.
If this device is defective or malfunctioning, please unplug the power
source immediately and contact dealer or service center.
Please use the rated power supply for the product.
Connect DC power to this device first and then to AC outlet when
using DC power supply.
Warranty
This device has passed the quality control and product inspection.
Please install and use according to the installation guide.
The warranty period for this product is 24 months from the date of
purchase.
If this device is defective or malfunctioning, please unplug the power
adapter immediately and contact dealer or service center.
Any damages or breakage from user’s abuse, accident, modification
or natural disasters will not be covered manufacturer’s warranty.
Please visit below website for more detailed information.
Web: http://www.intercoax.com Tel: [phone]~4
E-mail: [email protected] Fax: [phone]
This device complies with part 15 of the fcc rules. Operation is subject to the
following two conditions :
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received including interference
that may cause undesired operation
Applications
[Simply IP and PoE over UTP Cable]
NVR
UTP (Cat 5e or better)
FLX-11R
FLX-11T
PoE NVR
PoE
Camera
UTP (Cat 5e or better)
57V DC/1.2A Power Supply
(Sold Separately)
UTP (Cat 5e or better)
PoE NVR
PoE
Camera FLX-11R
FLX-11R
FLX-11T
Camera
[High Power over UTP Cable]
NVR
UTP (Cat 5e or better)
FLX-11R
FLX-11T
PoE NVR
PoE
Camera
UTP (Cat 5e or better)
57V DC/1.2A Power Supply
(Sold Separately)
UTP (Cat 5e or better)
PoE NVR
PoE
Camera FLX-11R
FLX-11R
FLX-11T
Camera
[Flexia Camera]
NVR
UTP (Cat 5e or better)
FLX-11R
FLX-11T
PoE NVR
PoE
Camera
UTP (Cat 5e or better)
57V DC/1.2A Power Supply
(Sold Separately)
UTP (Cat 5e or better)
PoE NVR
PoE
Camera FLX-11R
FLX-11R
FLX-11T
Camera
© Intercoax Co., Ltd.
Specification
Model FLX-11T FLX-11R
Interface
Flexia 1 x RJ45 - Long Reach
Ethernet 1 x RJ45 - 100 Base-T
Transmission Rate 100Mbps Full Duplex
(100Mbps between Intercoax devices)
Transmission
Distance
Flexia Up to 500m (2 Pair of Cat.5e)
PoE Up to 500m (4 Pair of Cat.5e / 7W Camera)
LED
Indication
Power 1 x Power On (Green)
Flexia 1 x Data (Blue)
Ethernet 1 x Data (Green)
PoE 1 x PoE On (Green)
Power
Input Flexia or DC48V~57V PoE Switch or
DC48V~57V
PoE Output
IEEE802.3af (PoE),
IEEE802.3at (PoE+),
with 57V Power
Adaptor
PoE Not
Supported
Flexia Only
Mechanical
Dimension 82.4(L) x 61.6(W) x 24(H)mm
Weight 70 g
Environment
Operating
Temp -20 ~ 60°C
Storage
Temp -30 ~ 80°C
Relative
Humidity 10% ~ 90%
Compliance
Certification FCC, CE, KC, RoHS
Surge
Protection
IEC 61000-4-5 4kV(1.2 / 50us),
2kA(8 / 20us)
Optional Accessories 57VDC / 1.2A External Power Supply