ActionTec T3200M User manual

TELUS Optik TV®
Self-Install Kit: Set-up Guide

Table of Contents
Before you get started ............................................................................................. Page 1
Step 1: Setting up your wireless digital box............................................................... Page 2
Step 2: Pairing with your Actiontec T3200M or wireless access point ....................... Page 3
Step 3: Setting up your Optik TV remote................................................................... Page 4
What you'll find in your kit:
Additional support:
1x Optik TV remote 2x AAA batteries 1x HDMI cable
1x Power supply 1x Wireless digital box
If you need help during installation, TELUS technical
support representatives are available 24/7.
Please call 310-MYTV (6988) for assistance or
visit telus.com/selnstall for additional information.
OK
We are continually listening to our customers to make your experience better every day.
Amazing service, it’s what sets us apart.

Before you get started
Confirm your TV has an available HDMI input:
Your kit includes an HDMI cable to connect your
wireless digital box to an HDMI input on your TV
(typically found on the back of the TV). If your TV
doesn’t have an available HDMI input, you’ll need
to use Component Audio and Video cables
instead (not included).
Identify your TELUS gateway/modem:
You will already have a gateway/modem installed in your home.
This would have been set up when you first received TELUS Internet.
To determine the model of your gateway/modem, check the sticker
on the device. If you have a T3200M, you will need to pair your wireless
digital box with your gateway/modem in Step 2. If you do not have this
model, you will need to identify your wireless access point (details below).
1
Identify your wireless access point (if applicable):
If you do not have an Actiontec T3200M, you will have a wireless
access point installed in your home. Locate this piece of equipment
and ensure that it is connected to your gateway/modem.
For a detailed visual reference of the equipment,
please visit telus.com/selnstall
Wireless access point
Actiontec T3200M
Pb YAUDIO
OUT
VIDEO
OUT
HDMI OPTICAL POWER
Pr
NETWORK
HDMI output
ACCESS
POINT
POWER
WPS
PAIRED
LINK

Step 1: Setting up your wireless digital box
Connect the power supply for the wireless digital
box to an available power outlet near your TV.
Wait until the POWER light on the front of the
wireless digital box turns solid green.
Using your TV manufacturer's remote, turn on your TV
and select the appropriate input using the input or
source button on your remote. The input selected
should match the input that you plugged your HDMI
cable into for the previous step.
While the wireless digital box initializes,
insert the 2 AAA batteries included in your
kit into your Optik TV remote.
Using the HDMI cable included in your kit, connect the
wireless digital box to any available HDMI input on your TV.
If your TV doesn’t have an available HDMI input, you’ll need
to use Component Audio and Video cables (not included).
Make note of the HDMI or Component input that you
plugged your cable into (i.e. HDMI 1). This will be needed
for the next step.
2
OK
Pb YAUDIO
OUT
VIDEO
OUT
HDMI OPTICAL POWER
Pr
NETWORK
2
1
3
4
© 2016 TELUS. 07/16

Step 2: Pairing with your Actiontec T3200M
or wireless access point
If you have an Actiontec T3200M (as identified
at the beginning of the instructions) press
the button on the front of the device for at least
5 seconds. If you have a wireless access point
instead, simply press the WPS button on the front
of your wireless access point.
Press the OK button on the front of your wireless
digital box.
3
OK
Installation is now complete. The next step is to set up
your Optik TV remote.
Note: If the set-up is unsuccessful, an error screen will appear
prompting for a manual restart. Refer back to your order confirmation
email for your Optik TV Self-Install Kit. It will include an 11-digit
activation code, which is only required if your set-up is unsuccessful.
Actiontec T3200M Wireless access point
ACCESS
POINT
POWER
WPS
PAIRED
LINK
OR
2
1
3
4
Your wireless digital box will automatically restart to
complete registration. This will take approximately
5 minutes, but may take longer if updates are
required.

Step 3: Setting up your Optik TV remote
4
Programming instructions for your T V
© 2016 TELUS. 02/16 2220724
Quick tip:
To have your digital box and TV come on with 1 button press, follow the steps below.
Q Press and hold for 3 seconds, until the green LED on the remote control flashes twice.
Q Enter code 0007– green LED flashes twice.
will then turn on both your digital box and TV: (and amplifier if programmed).
To turn power sync off. Enter code 0006and the green LED will flash twice.
Before getting started:
QStand 6-8 feet away from the TV and ensure there is a clear line of sight
between the remote and the digital box.
QMake sure the TV and digital box are on.
1Turn on the device for which you would like to program the remote. This could be
your TV or amplifier. The device that is not being programmed, should be turned off.
2Set the volume of the digital box to 25 by using the remote volume button before you
program your TV or amplifier.
3Press and hold for 3 seconds, until the green LED next to the OPTIK button on
the remote control flashes twice.
4From the lists below, enter the 4-digit code for the brand of your TV or amplifier. The LED light
beside the TV button will flash twice in red when a TV code is entered, and twice in yellow
when an amplifier code is entered.
Aiwa 0070
Bose 0067
Denon 0063
Harman/
Kardon 0062
Hitachi 0071
LG 0065
Onkyo 0066
Phillips 0069
Pioneer 0068
Samsung 0064
Sanyo 0073
Sharp 0072
Sony 0060
Yamaha 0061
Other*0079
Codes for
Amplier Brands
5Press and hold until your TV or amplifier switches off.
6As soon as your TV or amplifier switches off, remove your finger from and press
to confirm – the red TV light will flash twice.
7Now press again to switch your TV or amplifier back on.
Tap to go back.
Press and hold
to exit.
LED Lights
Funai 0011
Insignia 0021
LG 0015
Panasonic 0013
Philips 0019
RCA 0020
Samsung 0018
Sanyo 0012
Sharp 0014
Sony 0017
Toshiba 0016
Vizio 0010
Other*0029
Codes for
TV Brand
Powers on your
TV and/or amplier.
Powers on your
digital box.