Intermec G4000 Manual

Placing Feet on the Intermec Application Server
To protect your desktop from scratches, place the four self-adhesive feet
on the bottom of your Intermec Application Server.
Note: If you plan to mount the Intermec Application Server
in a rack, do not attach the feet.
To attach the feet
1 Remove the backing from the feet.
2 Place the feet on the bottom corners of the Intermec Application
Server. Place the feet as close to the outside corners as possible.
Self-adhesive foot
(4 places)

6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel [phone]
fax [phone]
www.intermec.com
©2005 Intermec Technologies
Corporation. All rights reserved.
Placing Feet on the Intermec Application Server
*072320-002*
P/N 072320-002