Intertek PH01-SSB/HL2021A User manual

OWNER’S MANUAL
PATIO HEATER
MODEL #
DANGER
WARNING: For Outdoor Use Only
WARNING
PH01-SSB/HL2021A

4
5
6
7
8
9
Step 2 --Attach ground fixtures to Base
Step 3 --Attach Post to Cylinder Housing top

Gas hose and
regulator

Step 2 -- Attach ground fixtures to Base
Option 2:If no water tank, go ahead this step
Option1: Preassembled into base
Ŷ6OLGH/DUJHEROWVWKURXJKKROHVRI%DVH.
Ŷ6OLGH/DUJHQXWVWKURXJKKROHVXQGHUEXFNHW
DQGWLJKWHQVFUHZVZLWKSKLOOLSVVFUHZGULYHU
Ŷ)LOOEXFNHWZLWKVDQG
5HT¶G/DUJH6FUHZV
5HT¶G/DUJH1XWV
21
21
 6PDOO1XWV 2
86PDOO%ROW 2/5
7
6
6

7
1 / 2 / 5 / 6
2
2

8

M6xM12
3
with the decorative ring
4(For models without tables,skip to step 4)
shown.
shown.
5
Insert the fastening piece through the hole on the
tabletop. Hold the tabletop using your hand and
screw the fastening piece to the plastic connector
counter-clockwise,using the other hand. Tighten the
fastening piece.Screw the plastic nut to the plastic
connector counter-clockwise.Tighten the plastic nut.
Adjust the height of the tabletop.Loosen the plastic
nut and adjust the tabletop to the height you want.
Tighten the plastic nut.
6

8
9
leave loose.
as above.
7
assembly.
Slide two reflector panels together.