INUX3D TerraPi Xtreme DUO User manual

© INUX3D 2021 V1.1
TERRAPI EXTREME DUO -
TPXDUO
Assembly Instructions
21 3456 7 8 9 10 11 12 13 14 15 16
21 3456 7 8 9 10 11 12 13 14 15 16
B
A
C
D
E
F
G
H
I
J
K
L
B
A
C
D
E
F
G
H
I
J
K
L
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
4/6/2021TPXDUOBOR
DRAFTA1 REF - PARTS LIST
4/6/20216/4/2021
1/1
TPXDUOB 4
TerraPi DUO
LLLlertas LlertasINTERNALDESIGN
Parts List
Item Qty Part Number Part Name Description
1 1 Right Right EX NX2
2 1 Left Left EX NX2
3 2 A Clip V3 A Clip V3 EX XPTG - EX PTG
42B Clip V3 B Clip V3 EX XPTG - EX PTG
58UNC 6-32 v1 UNC 6-32 v1 AM B01MRJ7SAD
6 8 Hex_button_head_
M4x08 v1
Hex_button_head_
M4x08 v1
B4X8/BN19
78M4 Square Nut M4 Square Nut KL 14162304
8 4 Spacer M2.5x6 Spacer M2.5x6 TFM-M2.5X6/DR212S
94M2.5 Nut M2.5 Nut TM M2.5/D934-A2
10 1 HAT v7 M2.5 HAT v7 M2.5 EX NX2 - EX PTG
11 4M2.5x16 M2.5x16 TM M2.5X16/D7985B
16 4 Rubber Foot
10x10x2mm
Rubber Foot
10x10x2mm
SJ5007/BK
16
6
3
11
10
1
8
5
4
2
7
4
3
6
1
6
16
16
8
8
5
5
5
6
8
8
8
9
10
2
6
6
616
16
5
5
5
5
99
8
86
6
77
7
7
66
11 11
1
2
10
3
4
LEFT SIDE VIEW
TOP VIEW
45.721
109.04
55.66
Package contains
40mm Fan (Black) 4040105V
Set of 4 heatsinks PI4HSSET
TPXDUO
TerraPi Xtreme DUO (BLACK &
BLACK ORANGE)
INUX3D
Packaging BOX Dimensions
162x154x52mm
TOP OBALY Kód: 507369
ORANGE - BLACK
BLACK
Lower Strut Assembly
All of the fasteners required for assembling this component are found in Bag 2.
Bag 2 contains 4 x M4*8mm bolts, 4 x M4 Hex Nuts and 4 x M2.5*6mm bolts
ŸFlip the entire assembly on it's back so that the undersides are visible.
ŸThe lower strut assembly comprises of 4 parts, 2 Left and 2 Right. Each part is
marked L or R
ŸUsing the M2.5x6mm bolts you will now join both the Left and Right lower
struts together to form a longer strut. The M2.5 bolt will pass through the bolt
hole on the Left part and you will screw directly into the plastic of the Right
part.
ŸYou will perform this step twice, creating 2 lower struts.
M2.5x6
M2.5x6
M4x8
M4x8
M4x8
M4x8 Rubber Foot
Rubber Foot
Rubber Foot
Rubber Foot
Front Right Strut
Front Left Strut
ŸWe will tighten the Top Left and Right bolts as well as the lower strut bolts to
stiffen up the entire assembly.
ŸPosition one of the lower strut assemblies into the notches under each of the
Left and Right sides.
ŸInsert an M4*8mm bolt from below and place an M4 hex nut into the nut
shaped recesses and loosely tighten the protruding bolt.
ŸRepeat for the second lower strut assembly.
ŸAttach the 4 rubber feet in the positions indicated in the diagram above.
DO NOT OVER TIGHTEN.
Biodegradable according
to DIN EN ISO 14855
MADE IN EU
8 586022 660252
Compatible with the ATEM Mini Extreme
and ATEM Mini Extreme ISO
INUX3D
d e s i g n s t u d i o
TM
TUV
TUV Hessen
EN ISO
9001
2015
5
INUX Cloud s.r.o.
Galvaniho 12B
Bratislava 82104
Slovakia
Assembly Instructions
This product was produced with an additive manufacturing process. Minor surface imperfections do not affect the overall product functionality. Instagram: @aaronpk_tv | Twitter: @aaronpk
You can also get support and show off photos of your rigs in our friendly community at
forum.livevideotech.today
Thanks so much for your support! I hope this stand makes your productions even more
successful. I'd love to see a photo of your new rig! Post a photo on Instagram or Twitter and
tag it with #pk1stand
- Aaron
21 3456 7 8 9 10 11 12 13 14 15 16
21 3456 7 8 9 10 11 12 13 14 15 16
B
A
C
D
E
F
G
H
I
J
K
L
B
A
C
D
E
F
G
H
I
J
K
L
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
4/6/2021TPXDUOBOR
DRAFTA1 REF - PARTS LIST
4/6/20216/4/2021
1/1
TPXDUOB 4
TerraPi DUO
LLLlertas LlertasINTERNALDESIGN
Parts List
Item Qty Part Number Part Name Description
1 1 Right Right EX NX2
2 1 Left Left EX NX2
3 2 A Clip V3 A Clip V3 EX XPTG - EX PTG
42B Clip V3 B Clip V3 EX XPTG - EX PTG
58UNC 6-32 v1 UNC 6-32 v1 AM B01MRJ7SAD
6 8 Hex_button_head_
M4x08 v1
Hex_button_head_
M4x08 v1
B4X8/BN19
78M4 Square Nut M4 Square Nut KL 14162304
8 4 Spacer M2.5x6 Spacer M2.5x6 TFM-M2.5X6/DR212S
94M2.5 Nut M2.5 Nut TM M2.5/D934-A2
10 1 HAT v7 M2.5 HAT v7 M2.5 EX NX2 - EX PTG
11 4M2.5x16 M2.5x16 TM M2.5X16/D7985B
16 4 Rubber Foot
10x10x2mm
Rubber Foot
10x10x2mm
SJ5007/BK
16
6
3
11
10
1
8
5
4
2
7
4
3
6
1
6
16
16
8
8
5
5
5
6
8
8
8
9
10
2
6
6
616
16
5
5
5
5
99
8
86
6
77
7
7
66
11 11
1
2
10
3
4
LEFT SIDE VIEW
TOP VIEW
45.721
109.04
55.66
Package contains
40mm Fan (Black) 4040105V
Set of 4 heatsinks PI4HSSET
TPXDUO
TerraPi Xtreme DUO (BLACK &
BLACK ORANGE)
INUX3D
Packaging BOX Dimensions
162x154x52mm
TOP OBALY Kód: 507369
ORANGE - BLACK
BLACK
Lower Strut Assembly
All of the fasteners required for assembling this component are found in Bag 2.
Bag 2 contains 4 x M4*8mm bolts, 4 x M4 Hex Nuts and 4 x M2.5*6mm bolts
ŸFlip the entire assembly on it's back so that the undersides are visible.
ŸThe lower strut assembly comprises of 4 parts, 2 Left and 2 Right. Each part is
marked L or R
ŸUsing the M2.5x6mm bolts you will now join both the Left and Right lower
struts together to form a longer strut. The M2.5 bolt will pass through the bolt
hole on the Left part and you will screw directly into the plastic of the Right
part.
ŸYou will perform this step twice, creating 2 lower struts.
M2.5x6
M2.5x6
M4x8
M4x8
M4x8
M4x8 Rubber Foot
Rubber Foot
Rubber Foot
Rubber Foot
Front Right Strut
Front Left Strut
ŸWe will tighten the Top Left and Right bolts as well as the lower strut bolts to
stiffen up the entire assembly.
ŸPosition one of the lower strut assemblies into the notches under each of the
Left and Right sides.
ŸInsert an M4*8mm bolt from below and place an M4 hex nut into the nut
shaped recesses and loosely tighten the protruding bolt.
ŸRepeat for the second lower strut assembly.
ŸAttach the 4 rubber feet in the positions indicated in the diagram above.
DO NOT OVER TIGHTEN.
Biodegradable according
to DIN EN ISO 14855
MADE IN EU
8 586022 660252
Compatible with the ATEM Mini Extreme
and ATEM Mini Extreme ISO
INUX3D
d e s i g n s t u d i o
TM
TUV
TUV Hessen
EN ISO
9001
2015
5
INUX Cloud s.r.o.
Galvaniho 12B
Bratislava 82104
Slovakia
Assembly Instructions
This product was produced with an additive manufacturing process. Minor surface imperfections do not affect the overall product functionality. Instagram: @aaronpk_tv | Twitter: @aaronpk
You can also get support and show off photos of your rigs in our friendly community at
forum.livevideotech.today
Thanks so much for your support! I hope this stand makes your productions even more
successful. I'd love to see a photo of your new rig! Post a photo on Instagram or Twitter and
tag it with #pk1stand
- Aaron
Lower Strut Assembly
All of the fasteners required for assembling this component are found in Bag 2.
Bag 2 contains 4 x M4*8mm bolts, 4 x M4 Hex Nuts and 4 x M2.5*6mm bolts
ŸFlip the entire assembly on it's back so that the undersides are visible.
ŸThe lower strut assembly comprises of 4 parts, 2 Left and 2 Right. Each part is
marked L or R
ŸUsing the M2.5x6mm bolts you will now join both the Left and Right lower
struts together to form a longer strut. The M2.5 bolt will pass through the bolt
hole on the Left part and you will screw directly into the plastic of the Right
part.
ŸYou will perform this step twice, creating 2 lower struts.
M2.5x6
M2.5x6
M4x8
M4x8
M4x8
M4x8 Rubber Foot
Rubber Foot
Rubber Foot
Rubber Foot
Front Right Strut
Front Left Strut
ŸWe will tighten the Top Left and Right bolts as well as the lower strut bolts to
stiffen up the entire assembly.
ŸPosition one of the lower strut assemblies into the notches under each of the
Left and Right sides.
ŸInsert an M4*8mm bolt from below and place an M4 hex nut into the nut
shaped recesses and loosely tighten the protruding bolt.
ŸRepeat for the second lower strut assembly.
ŸAttach the 4 rubber feet in the positions indicated in the diagram above.
DO NOT OVER TIGHTEN.
Biodegradable according
to DIN EN ISO 14855
MADE IN EU
8 586022 660252
Compatible with the ATEM Mini Extreme
and ATEM Mini Extreme ISO
INUX3D
d e s i g n s t u d i o
TM
TUV
TUV Hessen
EN ISO
9001
2015
5
INUX Cloud s.r.o.
Galvaniho 12B
Bratislava 82104
Slovakia
Assembly Instructions
This product was produced with an additive manufacturing process. Minor surface imperfections do not affect the overall product functionality. Instagram: @aaronpk_tv | Twitter: @aaronpk
You can also get support and show off photos of your rigs in our friendly community at
forum.livevideotech.today
Thanks so much for your support! I hope this stand makes your productions even more
successful. I'd love to see a photo of your new rig! Post a photo on Instagram or Twitter and
tag it with #pk1stand
- Aaron
Parts of this product were produced with an additive manufacturing process. Minor surface imperfections do not affect the overall product functionality.
21 3456 7 8 9 10 11 12 13 14 15 16
21 3456 7 8 9 10 11 12 13 14 15 16
B
A
C
D
E
F
G
H
I
J
K
L
B
A
C
D
E
F
G
H
I
J
K
L
Dept. Technical reference Created by Approved by
Document type Document status
Title DWG No.
Rev. Date of issue Sheet
4/6/2021TPXDUOBOR
DRAFTA1 REF - PARTS LIST
4/6/20216/4/2021
1/1
TPXDUOB 4
TerraPi DUO
LLLlertas LlertasINTERNALDESIGN
Parts List
Item Qty Part Number Part Name Description
1 1 Right Right EX NX2
2 1 Left Left EX NX2
3 2 A Clip V3 A Clip V3 EX XPTG - EX PTG
42B Clip V3 B Clip V3 EX XPTG - EX PTG
58UNC 6-32 v1 UNC 6-32 v1 AM B01MRJ7SAD
6 8 Hex_button_head_
M4x08 v1
Hex_button_head_
M4x08 v1
B4X8/BN19
78M4 Square Nut M4 Square Nut KL 14162304
8 4 Spacer M2.5x6 Spacer M2.5x6 TFM-M2.5X6/DR212S
94M2.5 Nut M2.5 Nut TM M2.5/D934-A2
10 1 HAT v7 M2.5 HAT v7 M2.5 EX NX2 - EX PTG
11 4M2.5x16 M2.5x16 TM M2.5X16/D7985B
16 4 Rubber Foot
10x10x2mm
Rubber Foot
10x10x2mm
SJ5007/BK
16
6
3
11
10
1
8
5
4
2
7
4
3
6
1
6
16
16
8
8
5
5
5
6
8
8
8
9
10
2
6
6
616
16
5
5
5
5
99
8
86
6
77
7
7
66
11 11
1
2
10
3
4
LEFT SIDE VIEW
TOP VIEW
45.721
109.04
55.66
Package contains
40mm Fan (Black) 4040105V
Set of 4 heatsinks PI4HSSET
TPXDUO
TerraPi Xtreme DUO (BLACK &
BLACK ORANGE)
INUX3D
Packaging BOX Dimensions
162x154x52mm
TOP OBALY Kód: 507369
ORANGE - BLACK
BLACK

On a clear at surface, lay out
all of your parts to assist in
the identication of parts and
assembly processes
Position the fan over the Fan
HAT (Part10)
Place one of the bolts from the
small plastic bag containing the
fan into one corner of the fan
and through the Fan HAT
Note the position of the power
cables. This is important later
Flip the fan and Fan HAT over
and position a fan nut over the
bolt and attach the nut to the
protruding bolt
TERRAPI EXTREME DUO
Assembly Instructions Page 2 of 11
© INUX3D 2021 V1.1

Flip the assembly over and
tighten the bolt and nut
Repeat for each of the fan
corners
Locate the M2.5 nut recesses on
the INSIDE of the RIGHT side
plate (Part1)
Press t the 4 x M2.5 nuts
(Part9) into the recesses. You
may need to hold each nut in
place as you insert the standoffs
in the next step
Flip over the RIGHT side plate
and screw an M2.5 x 6mm
standoff / spacer (Part8)
through the side plate into the
M2.5 nut on the other side
Repeat for each of the
remaining standoffs
TERRAPI EXTREME DUO
Assembly Instructions Page 3 of 11
© INUX3D 2021 V1.1

Flip over the side plate so the
standoffs are facing down.
Position an A Clip (Part3) in the
TOP FRONT corner of the side
plate
There is an ‘A’ visible on the part
Place a Square Nut (Part7) into
the square recess of the A Clip.
Insert an M4x8 bolt (Part6)
from the outside of the side
plate, through the A Clip and
screw into the Square Nut
*Square Nut colour may differ
based on availability
Loosely tighten the bolt into the
Square Nut.
You will fully tighten these
bolts once your drives are in
place
You should end up with
something like this example
TERRAPI EXTREME DUO
Assembly Instructions Page 4 of 11
© INUX3D 2021 V1.1

Position a B Clip (Part4) in the
TOP REAR corner of the side
plate
There is a ‘B’ visible on the part
The two screw holes of both A
and B should now be facing
each other
Insert an M4x8 bolt (Part6)
from the outside of the side
plate, through the B Clip and
into the Square Nut
Place a Square Nut (Part7) into
the square recess of the B Clip.
*Square Nut colour may differ
based on availability
While holding the Square Nut
and B Clip in place, loosely
tighten the M4 bolt into the
Square Nut
You will fully tighten these
bolts once your drives are in
place
You will now position the
second A Clip DIAGONALLY
OPPOSITE from the original
AClip
Place and attach to the Square
nut as before
TERRAPI EXTREME DUO
Assembly Instructions Page 5 of 11
© INUX3D 2021 V1.1

You will now position the
second B Clip DIAGONALLY
OPPOSITE from the original
BClip
Place and attach to the Square
nut as before
Your assembly will now look
something like this. The feet are
facing upwrads
Ensure all bolt holes in The A / B
Clips are facing up and down
Ensure all cable management
slots open AWAY from the
attached side plate
Position the LEFT side panel
(Part2) so that the feet match
the orientation of the RIGHT
side panel
Position an M4x8mm bolt
(Part6) through the LEFT side
panel and through an end of
one of the A or B Clips
TERRAPI EXTREME DUO
Assembly Instructions Page 6 of 11
© INUX3D 2021 V1.1

Place a Square Nut (Part7) over
then end of the protruding bolt
and loosely tighten the bolt
Repeat for each of the
remaining corners so that
either side panel are loosely
connected to the A / B Clips
*The INUX3D logo designates
the REAR of the construction
Insert one of your 3.5” HDD’s
from the FRONT of the TPXDUO
with the HDD ports also facing
the FRONT
Slide the rst HDD so that
the holes for the HDD Screws
(Part5) line up between the
HDD and the TPXDuo frame
TERRAPI EXTREME DUO
Assembly Instructions Page 7 of 11
© INUX3D 2021 V1.1

Screw in an HDD Screw (Part5)
into both the FRONT and REAR
HDD screw holes
Don’t fully tighten yet
The HDD screw colour may be
different in your kit
Now insert the second HDD,
align the screw holes between
the A / B Clips and the HDD
Loosely tighten the remaining
2 screws and you should have
an assembly that looks like this
from the TOP
Flip the entire assembly over so
that the feet are now pointing
upwards
Insert and tighten the 4 HDD
screws through the A / B Clips
and into the HDD
You can now ip the assembly
and tighten the other 4 screws
TERRAPI EXTREME DUO
Assembly Instructions Page 8 of 11
© INUX3D 2021 V1.1

To install your Raspberry Pi, lay
the assembly on the LEFT side
so that the metal standoffs are
facing upward and the HDD
connections are facing you
Roughly position the RPi as
pictured and prepare to afx
the supplied heat sinks to the
RPi
Afx the heat sinks on the RPi
BEFORE attaching the Fan HAT
(Part10)
Place the Fan HAT and fan
assembly over the RPi.
Line up the holes with the
standoffs under the RPi and
insert and loosely tighten an
M2.5x16 (Part11) into one of the
corners
TERRAPI EXTREME DUO
Assembly Instructions Page 9 of 11
© INUX3D 2021 V1.1

Insert and tighten all M2.5x16
screws to secure the Fan HAT
assembly and the RPi to the
TPXDuo
Connect the Fan to GPIO Pins 4
and 6 on the RPi
Double check these BEFORE
powering anything on
Install the 4 rubber feet (Part16)
as shown
Connect the SATA adaptors
Depending on which USB ->
SATA adaptors you purchase,
they may look different than the
one in the diagram.
Ensure you have purchased
POWERED SATA connections
for any 3.5” HDD
TERRAPI EXTREME DUO
Assembly Instructions Page 10 of 11
© INUX3D 2021 V1.1