IOGear GBC232A User manual

Quick Start Guide
GBC232A
PART NO. Q1375
www.iogear.com
Bluetooth Serial Adapter

1
Package Contents
System Requirements
1 x GBC232A Bluetooth Serial Adapter
1 x RS232 Extension Cable
1 x Null Modem Adapter (Female)
1 x Power Adapter
1 x Installation CD
1 x Quick Start Guide
1 x Warranty Card
PC Requirements
• Built-in Bluetooth, Bluetooth USB Adapter or additional IOGEAR Bluetooth
Serial Adapter
Operating System
• For PC: Windows Vista®, Windows®7, Windows®8.1, Windows®10
Overview
Right View:
1. Power Slide Switch
2. Bluetooth LED
3. Mode LED
4. Power LED
12
oo
ADAPTER
RI / 5V
34

2
Setting Up Your Bluetooth Serial Adapter
The Bluetooth Serial Adapter is compatible with DTE – Data Terminal Equipment
(i.e. PC) RS-232 devices. Use the provided Null Modem Adapter to connect to
DCE – Data Communications Equipment serial devices (i.e. modem). Follow the
steps below to configure the adapter for initial use.
Left View:
5. Mode Button
6. DC Power Jack
5
Configuring the Bluetooth Serial Adapter on Your PC
1. Windows®Vista: Press the button on the desktop taskbar, go to Settings
and select Control Panel.
Windows®7: Press the button on the desktop taskbar and select
Control Panel.
Windows®8.1 / Windows®10: Press the keys and select
Control Panel.
oo
C
CFG / RST
6

3
2. Windows Vista: Select Hardware and Sound
Windows 7 / Windows 8.1 / Windows 10: Change view to Category.
Select View devices and printers under Hardware and Sound.
Configuring the Bluetooth Serial Adapter on Your PC
1. Windows®Vista: Press the button on the desktop taskbar, go to Settings
and select Control Panel.
Windows®7: Press the button on the desktop taskbar and select
Control Panel.
Windows®8.1 / Windows®10: Press the keys and select
Control Panel.

4
4. Windows Vista: Click the Add button.
5. Connect the included power adapter to the DC Power Jack on the
Bluetooth Serial Adapter. Push and hold the
CFG / RST button for one second.
3. Windows Vista: Scroll down to “Bluetooth Devices” and click on Set up a
Bluetooth enabled device.
Windows 7 / Windows 8.1 / Windows 10: Skip to step 5.
6. The device will enter Configuration mode
when the Mode LED lights solid orange.
CFG / RST +
IOIOI

5
7. Windows Vista: Check the box next to “My device is set up and ready to be
found” and click Next.
Windows 7 / Windows 8.1 / Windows 10: Click on Add a device.

6
Windows 7 / Windows 8.1 / Windows 10: Select Serial when it appears and
click Next.
8. Windows Vista: Select Serial when it appears and click Next.

7
9. Windows Vista: Click on Use the passkey found in the documentation and
enter 1234. Press the Next button.
Windows 7: Click on Enter the device’s pairing code.
Windows 8.1 / Windows 10: Skip to Step 10.

8
10. Windows Vista: Click the Finish button.
Windows 7 / Windows 8.1 / Windows 10: Enter passcode 1234 and click Next to
complete pairing.

9
11. Windows Vista: From the Bluetooth Devices window in the desktop
background, select Serial and click on the Properties button.
Windows 7 / Windows 8.1 / Windows 10: Right click on Serial icon and
select Properties.

11. Windows Vista: From the Bluetooth Devices window in the desktop
background, select Serial and click on the Properties button.
12. Windows Vista: Select the Services tab to identify which COM port is being
used. Press the OK button.
Windows 7 / Windows 8.1 / Windows 10: Select the Hardware tab to identify
which COM port is being used. Press the OK button.
10

12. Windows Vista: Select the Services tab to identify which COM port is being
used. Press the OK button.
13. Insert Installation CD. When an explorer window pops up, right click on the
GBC232A Bluetooth Serial Adapter Configurator file and select
“Run as administrator”.
14. Select the COM Port identified in Step 12 from the COM Port dropdown menu
and 19200 from the Baud Rate menu. Next, click on the Connect button.
15. The connection is successful when the MAC address and Firmware version
appear at the bottom of the configuration window and the Bluetooth LED lights
solid blue.
11
IOIOI

16. Select “UART Configuration” and confirm that Baud Rate is set to 19200, Stop
Bit is set to one, and Parity Bit is set to None. Click the Save button to save
your settings.
17. Click on the Disconnect button and close the IOGEAR Bluetooth Serial
Adapter Configuration tool.
18. Push the CFG / RST button for one second and release. The orange Mode LED
light will turn off. You have successfully completed configuration of the Bluetooth
Serial Adapter.
19. Open your preferred terminal program and configure the settings to match your
serial device.
12

16. Select “UART Configuration” and confirm that Baud Rate is set to 19200, Stop
Bit is set to one, and Parity Bit is set to None. Click the Save button to save
your settings.
18. Push the CFG / RST button for one second and release. The orange Mode LED
light will turn off. You have successfully completed configuration of the Bluetooth
Serial Adapter.
19. Open your preferred terminal program and configure the settings to match your
serial device.
Compliance Statement
FCC Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential setting. This product generates,
uses, and can radiate radio frequency energy and, if not installed
and used as directed, it may cause harmful interference to radio
communications. Although this product complies with the limits for a
Class B digital device, there is no guarantee that interference will not
occur in a particular installation.

Limited Warranty
Warranty Information
This product carries a 1 Year Limited Warranty. For the terms and
conditions of this warranty, please go to
http://www.iogear.com/support/warranty
Register online at http://www.iogear.com/register
Important Product Information
Product Model
Serial Number

Contact
WE’RE HERE TO HELP YOU!
NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:
1. Visit www.iogear.com for more product information
2. Visit www.iogear.com/support for live help and product support
IOGEAR
iogear.custhelp.com
[e-mail]
www.iogear.com
19641 Da Vinci, Foothill Ranch, CA 92610