ION BLOCK ROCKER BLUETOOTH User manual

Confidential ION Audio Service Manual
ION Audio
BLOCK ROCKER (2010)
[iPA06]
Service Manual
Rev. 1
2011.03.08
The information in this document contains privileged and confidential information. It is intended
only for the use of those authorized by ION Audio. If you are not the authorized, intended
recipient, you are hereby notified that any review, dissemination, distribution or duplication of this
document is strictly prohibited. If you are not authorized, please contact ION Audio and destroy
all copies of this document. You may contact ION Audio at [email protected].
Copyright ION Audio, LLC
ATTENTION!
THIS DOCUMENT CONTAINS SENSITIVE
PROPRIETARY INFORMATION.
ALL RECIPIENTS MUST HAVE A CURRENT
NON-DISCLOSURE AGREEMENT ON FILE
WITH ION AUDIO, LLC.
DO NOT MAKE ILLEGAL
COPIES OF THIS DOCUMENT

Confidential ION Audio Service Manual
PREFACE
This document is intended to assist the service technician in the operation, maintenance and
repair of the ION Audio device. Together with the User Reference Manual, this document
provides a complete description of the functionality and serviceability of the Device. Any
comments or suggestions you may have pertaining to the document are welcome and
encouraged.
READ THIS!
In addition to any purchase price that ION Audio may charge as consideration for ION Audio
selling or otherwise transferring this service manual (“Manual”) to you, if you are not a service and
repair facility (“Service Center”) authorized by ION Audio in writing to be an authorized Service
Center, ION Audio sells or transfers the Manual to you on the following terms and conditions:
Only Service Centers authorized by ION Audio in writing are authorized to perform service and
repairs covered by an ION Audio warranty (if any), and transfer of the Manual to you does not
authorize you to be an authorized Service Center. Therefore, if you perform, or if the Manual
is used to perform, any service or repairs on any ION Audio product or part thereof, any
and all warranties of ION Audio as to that product and any service contract with ION Audio
for that product shall be voided and shall no longer apply for such product, even if your
services or repairs were done in accordance with the Manual.
All service or repairs done by you or with reference to the Manual shall be solely your
responsibility, and ION Audio shall have no liability for any such repairs or service work. All such
service or repairs are performed at the sole risk of the person performing the service or
repairs. You agree that all such work will be performed in a competent, professional and safe
manner at all times and to indemnify and fully hold ION Audio and its successors and assigns
harmless in the event of any failure to so perform.
Your purchase of the Manual shall be for your own ultimate use and shall not be for purposes of
resale or other transfer.
As the owner of the copyright to the Manual, ION Audio does not give you the right to copy the
Manual, and you agree not to copy the Manual without the written authorization of ION Audio.
ION Audio has no obligation to provide to you any correction of, or supplement to, the Manual, or
any new or superseding version thereof.
ION Audio shall have the right to refuse to sell or otherwise transfer repair parts or materials to
you in its sole discretion. You shall not use, sell or otherwise transfer spare or replacement parts
supplied by ION Audio to you (i) to repair or be used in products manufactured for or by third
parties or (ii) to any third parties for any purpose.
You shall not make any warranties or guarantees with respect to the products of ION Audio or the
use thereof on behalf of ION Audio or in your own name.
The foregoing describes the entire understanding related to sale or transfer of the Manual to you,
and no other terms shall apply unless in a writing signed by an authorized representative of ION
Audio.
All Trademarks are property of their respective companies.

Confidential ION Audio Service Manual
WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, DO NOT EXPOSE
THIS PRODUCT TO WATER OR MOISTURE.
The arrowhead symbol on a lightning flash inside a triangle is
intended to alert the user to the presence of uninsulated "dangerous
voltage" within the enclosed product which may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point inside a triangle is intended to alert the user
to the presence of important operating, maintenance and servicing
instructions in the literature which accompanies the product.
REPAIR BY ANY PERSON OR ENTITY OTHER THAN AN AUTHORIZED ION
AUDIO SERVICE CENTER WILL VOID THE ION AUDIO WARRANTY.
PROVISION OF THIS MANUAL DOES NOT AUTHORIZE THE RECIPIENT TO
COMPETE WITH ANY ION AUDIO DISTRIBUTOR OR AUTHORIZED REPAIR
SERVICE CENTER IN THE PROVISION OF REPAIR SERVICES OR TO BE
OR MAKE REPAIRS AS AN AUTHORIZED SERVICE CENTER.
ALL REPAIRS DONE BY ANY ENTITY OTHER THAN AN AUTHORIZED ION
AUDIO SERVICE CENTER SHALL BE SOLELY THE RESPONSIBILITY OF
THAT ENTITY, AND ION AUDIO SHALL HAVE NO LIABILITY TO THAT
ENTITY OR TO ANY OTHER PARTY FOR ANY REPAIRS BY THAT ENTITY.
Regarding the Power Supply Fuse
CAUTION: The product under service may employ the use of a
replaceable fuse. Danger of fire or electrocution if fuse is incorrectly
replaced. Replace with only the same type or equivalent type
recommended by the equipment manufacturer.
Regarding the Internal Battery
CAUTION: The product under service may employ the use of a
internal battery. Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used batteries
according to the manufacturer's instruction.

Confidential ION Audio Service Manual
Safety Instructions
Carefully read the applicable items of the operating instructions and these safety suggestions
before using this product. Use extra care to follow the warnings written on the product itself and in
the operating instructions. Keep the operating instructions and safety suggestions for reference in
the future.
1. Power Source. The product should only be connected to a power supply which is described
either in the operating instructions or in markings on the product.
2. Power Cord Protection. AC power supply cords should be placed such that no one is likely to
step on the cords and such that nothing will be placed on or against them.
3. Periods of Non-use. If the product is not used for any significant period of time, the product's
AC power supply cord should be unplugged from the AC outlet.
4. Foreign Objects and Liquids. Take care not to allow liquids to spill or objects to fall into any
openings of the product.
5. Water or Moisture. The product should not be used near any water or in moisture.
6. Heat. Do not place the product near heat sources such as stoves, heat registers, radiators or
other heat producing equipment.
7. Ventilation. When installing the product, make sure that the product has adequate
ventilation. Improperly ventilating the product may cause overheating, which may damage the
product.
8. Mounting. The product should only be used with a rack which the manufacturer
recommends. The combination of the product and rack should be moved carefully. Quick
movements, excessive force or uneven surfaces may overturn the combination which may
damage the product and rack combination.
9. Cleaning. The product should only be cleaned as the manufacturer recommends.
10. Service. The user should only attempt the limited service or upkeep specifically described in
the operating instructions for the user. For any other service required, the product should be
taken to an authorized service center as described in the operating instructions.
11. Damage to the Product. Qualified service personnel should service the unit in certain
situations including without limitation when:
a. Liquid has spilled or objects have fallen into the product,
b. The product is exposed to water or excessive moisture,
c. The AC power supply plug or cord is damaged,
d. The product shows an inappropriate change in performance or does not operate
normally, or
e. The enclosure of the product has been damaged.

Line
No.
Part Number Part Name Spec QTY Location and Notes
1 FR000108 RoHS semi finished
articles:IPA07
IPA07 1
2 16040580 Cable AN-W4154 18#,UL1015,L=350mm（With 3.15A glass tube
fuse
)
1 Battery positive pole to B+
3 16140966 Multi-core Cables 18#,UL1015,350mm,blue 1 Battery positive pole to B-
4 16140116 Multi-core Cables 18#,UL1007,10+350+10mm,brown 1 One end to - of tweeter,the other end to - of
woofer
5 16140115 Multi-core Cables 18#,UL1007,10+350+10mm,black 1 One end to + of tweeter,the other end to + of
woofer
6 17050013 Non-polarity E/C 4.7uF/50V,±20%,-40/+85℃,Φ6*17mm, 1
7 30090009 Strain Relief 2.4*120mm,black 2 cables in cabinet
8 80010007 3/4" Tweeter AN-L107,10W,4ohm,YDG阳-4NbLH 1 Assemble to cabinet
9 80270001 6.5" Combo Speaker AN-LB27001,4Ω,30W,YD166-4XG, 1 Assemble to cabinet
10 21010254 Cabinet DN-X10193,MDF,T=12mm,310*312*232mm,black
PVC,V1.1
1
11 21090006 Wooden Board DN-X90005,T=12mm,black vinyl,V1.0(battery cover) 1 Cover battery
12 10410110 Grill DN-ME5072,SPCC,269*271mm,T=1.0mm,black
painting,V1.0
1 In the front of cabinet
13 20660001 Plate DN-PC6001,PC,black ,black painting,V1.0 7 Side of cabinet
14 20660002 Plate DN-PC6002,PC,black,black painting,V1.0 4 Side of cabinet
15 10360010 Corner DN-ME1004,35.5*35.5*35.5mm,T=0.8mm,V1.0 8 corners of cabinet
16 30060281 Foam 8*1100*1mm,EVA1030,black,double side adhesive 4 For corner
17 30060095 Foam 10*1000*1mm,EVA1030,sigle side adhesive 3 Battery board,battery,grill ,IPOD dock
18 30060078 Foam 4.5*1000*1.0mm,EVAE1030,sigle side adhesive 1 For IPOD dock
19 20320014 Handle DN-PE2014,ABS,black 2 Sides of Cabinet
20 20300009 Feet Φ28*22.5*11mm, black rubber feet 4 On the bottom of the cabinet
21 70010651 Screw Φ3*12mm,D6mm,nickle plating 24 Assemble corner
22 70010151 Screw Φ3*15mm,D5.5mm,black zinc 12 Assemble rear panel,Assemble speakers
23 70010467 Screw M4*30mm,D8mm,black zinc 4 Assemble battery cover
24 70010678 Screw Φ3*13mm,D5.5mm,black zinc 6 Assemble front cover
BOM

25 70010244 Screw Φ4*18mm,D8mm,black zinc 4 Assemble woofer
26 70010653 Screw Φ3*18mm,D7.5mm,black zinc 4 Assemble feet
27 20020033 Top Cover DN-PC2026,ABS,black ,126*114mm V1.0 1 IPOD Dock
28 20020034 Top Cover DN-PC2027,ABS,black ,46*54mm V1.0 1 IPOD Dock
29 20210089 Knob DN-PN2063,ABS,black ,V1.0 1 IPOD holder
30 20300065 Rubber Gasket DN-PE0024,42*22*1.0mm,black ,single side
adhesive,V1.0
1 IPOD Holder
31 20300033 Rubber Gasket DN-PE0013,V1.0,24*10*1.0mm,black,sigle side adhesive 1 IPOD holder
32 20290009 Bracket PT1104447(YA HORNG) 1 IPOD holder
33 20030050 Bottom Cover DN-PC3038,C21X505-03401G black 1 IPOD Dock
34 70010096 Screw Φ3*8mm,D7.5mm,black zinc 2 Assemble IPOD Holder
35 70010414 Screw Φ2*10mm,D3.5mm,black zinc 2 Assemble bracket of IPOD holder
36 70010232 Screw Φ4*16mm,D8mm,black zinc 14 Assemble handle and IPOD Dock
37 16040574 Cable AN-W4148,2P,18#,UL1015,350mm,red and white 1 Solder to speaker
38 DR000299 RoHS semi finished
articles:IPA07
IPA07 1
39 30010053 Sleeve Φ40*50*0.50mm,UL,black 1 power jack
40 30010018 Sleeve Φ5*10*0.28mm,UL,black 2 Lead of power switch
41 30010046 Sleeve Φ25*40*0.45mm,UL,black 1 selector switch
42 30010044 Sleeve Φ20*54*0.40mm,UL,black 1 Powe switch
43 16140959 Multi-core Cables 1P 20# UL1617 100mm,red 1 Pin 2 of voltage selector switch to N of power
jack
44 16040573 Cable AN-W4147 2P 18# UL1015 200mm, red 1
45 12030031 Rock Switch AN-S331,RF-1003,BB4 1 Rear Panel
46 40010030 Power Jack AN-J0130,HF-301RT2,(0.8T)(3P) with Fuse 1 Rear Panel
47 16060022 Ground Cable AN-W622,18#,UL1015,130mm, 1 power jack
48 90140002 Grounded Label DN-YP002,9mm 1 On the grounding
49 30090009 Strain Relief 2.4*120mm,black 7 cables
50 10100931 Panel DN-MC2245,SPCC,220*167*1.5mm,material,V1.0 1
51 55130001 Panel DN-MC2245,SPCC,T=1.5mm,black painting,V1.0 1
P/N 10160159 Front Panel DN-MC7054,SPCC,T=1.0mm,243*85mm,material,V1.0 1
53 55160001 Front Panel DN-MC7054,SPCC,T=1.0mm,243*85mm,black
painting,V1.0
1

54 56160004 Front Panel DN-MC7054,SPCC,T=1.0mm,black painting,white
silkscreen,V1.1
1
55 10530046 Post DN-MB604,M3,M3*15mm,white zinc plating,V1.0 8 amp and power pcb
56 10530050 Post DN-MB6050,M3,L=24mm,V1.0 1 Assemble lamp board
57 30150073 Rubber Gasket black rubber 84.5*32*1mm 1 Transformer
58 70090056 Gasket AN-C90056,Φ12*Φ4.2*1.5mm,steel, black zinc 2 Assemble to transformer
59 70090037 Gasket Φ8*Φ4.2*1.0mm,steel.nickel plating 1 Grounding
60 30060304 Foam fire proofing EVA1030,10*167*2mm,black, sigle side
adhesive, v1.0
2 For Panel
61 30060305 Foam Fire proofing EVA1030,10*200*2mm,Black,sigle side
adhesive,V1.0
2 For Panel
62 70010082 Screw AN-C10082,M3*8mm,D5.5mm,black zinc 4 Assemble Voltage selector switch,Assemble
power charge switch
63 70010062 Screw M3*6mm,D7.5mm, 2 Assemble amp,lamp board
64 70010218 Screw AN-C10218,M4*12mm,D7mm,black zinc 2 Assemble transformer
65 70010110 Screw Φ3*10mm,D5.5mm,black zinc 2 Assemble RCA Jack
66 70010048 Screw AN-C10048,M3*6mm,D5.5mm,black zinc 16 Assemble amp,power board,lamp board
67 70100004 Screw 6-32*9.5mm(3/8inch),D6mm, 1 Grounding
68 70070008 Nut Φ9*6-32*3.6mm,nickle plating 1 Grounding
69 70070028 Nut Φ8*M4*4.5mm,black zinc 2 Assemble transformer
70 16050123 Shield Cable AN-W5121,3P,26#,UL2547,450mm 1 One end to J11,the other end to J4 of power
board
71 20210118 Knob Cap DN-PN2087,ABS,chrome plating,V1.0(9-15-0424) 4 Pot of front panel
72 16050139 Shield Cable AN-W5137,3P,26#,UL2547,330mm 1 one end to J10,the other end to J5B power
charge display board.
73 16010330 Ribbon Wire AN-W19W,3P,22#,UL1007,150mm 1 one end on J2，the other end J1B power
indication board
74 CR001053 RoHS semi finished
articles:IPA07 AMP Board
IPA05 Amp Board 1
75 11110408 MO/R 1/2W,10Ω,±5%,立式,P=5.0mm,feet 4mm 2 R26-27
76 50030027 Metallic Polyester Cap 105,VDC63,±5%,yellow,7.2*11*6 2 C19-20
77 17050005 Non-polarity E/C 1uF/50V,±10%,-40/+85℃,Φ5*11mm,P=2.0mm,black, feet
is 4mm
2 C10,C15

78 17010256 E/C 470uF/25V,±20%,-40/+85℃,Φ8*14mm,P=3.5mm,black,
feet is 4mm
2 C8,C14
79 24100002 Magnetic Bead 9*0.8*3.5mm,±25%,RH03509ST-B246 1 FB1
80 40370098 Male Jack AN-JP410,3961-02,(P=3.96mm,180degree) 1 J3
81 24060073 Magnetic Core Inductance AN-I6067,10uH,3.5A,RIDR1010-100M. 2 L1-2
82 16040575 Cable AN-W4149 4P,22#,UL1007,50mm,red and black 1 Male end solder to J2 of amp board, female
end solder to J3 of power board
83 16050125 Shield Cable AN-W5123,3P,24#,UL2547,50mm 1 male end to J1 of amp board,female end to J5
of power board.
84 CR001054 RoHS semi finished
articles:IPA07 AMP Board
SMT Subassembly
PA07 AMP Board SMT Subassembly 1
85 26020422 PCB IPA05,AMP,FR4 double side board,AN-B20338,green,1
ounce,V1.0
1
86 14040663 IC TDA8932BT,SOP32,PHILIPS 1 IC1
87 11170001 SMD Resistor 1/8W,0Ω,±5%,0805, 2 R30,R31
88 11170009 SMD Resistor 1/8W,10Ω,±5%,0805 1 R16
89 11170036 SMD Resistor 1/8W,470Ω,±5%,0805 2 R11-12
90 11170059 SMD Resistor 1/8W,4.7KΩ,±5%,0805 2 R28-29
91 11170068 SMD Resistor 1/8W,10KΩ,±5%,0805 1 R4
92 11170083 SMD Resistor 1/8W,39KΩ,±5%,0805 1 R17
93 50050051 SMD Ceramic Cap 102,VDC50,±10%,X7R,0805, 1 C9
94 50050075 SMD Ceramic Cap 104,VDC50,±10%,X7R,0805, 12 C6-7 C11 C13 C17 C24 C26-27 C32-35
95 50050103 SMD Ceramic Cap 153,VDC50,±10%,X7R,0805, 2 C12,C18
96 50050160 SMD Ceramic Cap 471,VDC50,±10%,X7R,0805, 2 C39-40
97 CR001194 RoHS semi finished
articles :IPA07 Preamp
Board
IPA07 Preamp Board 1
98 14040373 IC NJM4558L,SIP8,JRC 4 U1-4
99 14040735 IC LM339N,DIP14,TI 1 U5
100 14040160 IC TL431-A,TO92,HITACHI 1 U6
101 50010021 C/C 33PF,VDC50,±5%,NPO,OD=5mm 1 C13
102 50010029 C/C 47PF,VDC50,±5%,NPO,OD=5mm 2 C5,C7
103 50010041 C/C 101,VDC50,±5%,NPO,OD=5mm 3 C8,C15,C17

104 50010191 C/C 121,VDC100,±5%,NPO,OD=5mm 3 C23-24,C29
105 50010095 C/C 221,VDC50,±5%,NPO,OD=7mm 4 C20,C22,C31,C41
106 50010051 C/C 102,VDC50,±10%,Y5P,OD=5mm 2 C1,C3
107 50010066 C/C 104,VDC50,+80/-20%,Y5VOD=5mm 7 C10-11,C18,C26-27,C32,C38
108 17020032 Mini E/C 10uF/50V,±20%,-40/+85℃,Φ5*7mm,P=2.0mm,black, feet
is 4mm
12 C6,C9, C16,C19, C28,C30,C33-34,C39-
40,C42-43
109 17020004 Mini E/C 0.22uF/50V,±20%,-40/+85℃,Φ4*7mm,P=1.5mm,black,
feet is 4mm
3 C2,C4,C14
110 17020061 Mini E/C 220uF/16V,±20%,-40/+85℃,Φ6.3*7mm,P=2.5mm,black,
feet is 4mm
2 C35,C37
111 17020008 Mini E/C 0.33uF/50V,±20%,-40/+85℃,Φ4*7mm,P=1.5mm,black,
feet is 4mm
2 C21,C25
112 17020049 Mini E/C 47uF/25V,±20%,-40/+85℃,Φ5*7mm,P=2.0mm,black, feet
is 4mm
1 C36
113 17010378 E/C 470uF/16V,±20%,-40/+105℃,Φ8*12mm,P=5mm,black 1 C12
114 15010390 VR AN-V21T,A10K,RA0919GOJ0A-HA1-000,L=15mm 1 VR3
115 15010391 VR AN-V21U,A10K,RA0919NOJ0B-HA1-000 3 VR1-2,VR4
116 40370002 Male Jack AN-JP401,2532-03,(180 degree,P=2.5mm) 1 J7
117 40370047 Male Jack AN-JP404,2533-03,(90 degree,P=2.5mm) 2 J10,J11
118 40370001 Male Jack AN-JP401,HT-2.54-02P-01A 1 J8
119 40370291 Male Jack AN-JP459 2022-05 5P 90 degree P=2.0 1 J5
120 40030051 6.35 Jack AN-J0350,SJ6305-5P 2 J1-2
121 40030013 6.35 Jack AN-J0317,SJ6327A 1 J4
122 16040468 Cable AN-W48W,2P,24#,UL1007,30mm,black and brown 1 Male end to J8,female end to J9
123 16040469 Cable AN-W49L,3P,24#,UL1007,30mm,black,brown and red 1 female end to J7, male end to J6
124 40190098 RCA Jack AN-J1990,RCA-207D 1 J3
125 30090009 Strain Relief 2.4*120mm,black 2 for cable and inductance
126 18040019 LED DIP,Φ3*5,GL-HEG14302 4 LED1-4
127 18040024 LED DIP,Φ3*5,GL-HH14302 1 LED5
128 20260023 LED Tube LEDS-10 1 LED1
129 20260012 LED Tube LED3-23A,Φ4.2*23mm 4 LED2-5
130 40370047 Male Jack AN-JP404,2533-03,(90 degree,P=2.5mm) 2 J1B,J5B
131 30060303 Foam fire proofing
EVA1030,T=25mm,85.75*48*25mm,black,double sides
adhesive,V1.0
1 power charge display board

132 CR001195 RoHS semi finished
articles:IPA07 Preamp
board AI subassembly
IPA07 Preamp board AI subassembly 1
133 26010384 PCB IPA07 PRE,94V0 single board,AN-B10348,green,1
ounce,V1.1
1
134 11080019 Jumper Φ0.8*5mm 10 JP3,4,9,11,15,18,19,22-24
135 11080022 Jumper Φ0.8*7.5mm 7 JP1,JP8,JP12-13,JP16-17,JP21
136 11080027 Jumper Φ0.8*10mm 2 JP5,JP20
137 11080028 Jumper Φ0.8*12.5mm 1 JP2
138 11080017 Jumper Φ0.6*20mm 1 JP6
139 11080015 Jumper Φ0.6*17.5mm 1 JP7
140 11130018 C/R 1/8W,100Ω,±5%, 3 R34-35,R37
141 11130031 C/R 1/8W,470Ω,±5%, 1 R45
142 11130040 C/R 1/8W,1KΩ,±5%, 4 R12,R32-33,R38
143 11130044 C/R 1/8W,1.5KΩ,±5%, 6 R10-11,R46-49
144 11130053 C/R 1/8W,3.3KΩ,±5%, 2 R22,R27
145 11130059 C/R 1/8W,4.7KΩ,±5%, 8 R8,R14,R18,R28-29,R30-31,R43
146 11130067 C/R 1/8W,10KΩ,±5%, 11 R9,R13,R16,R19-21,R24-25,R36,R41-42
147 11130076 C/R 1/8W,20KΩ,±5%, 6 R1-2,R7,R17,R52-53
148 11130075 C/R 1/8W,18KΩ,±5%, 2 R23,R26
149 11130094 C/R 1/8W,100KΩ,±5%, 2 R50-51
150 11130107 C/R 1/8W,360KΩ,±5%, 1 R15
151 11140227 M/R 1/8W,20KΩ,±1%, 2 R5-6
152 11140130 M/R 1/8W,27KΩ,±1%, 1 R54
153 11140089 M/R 1/8W,4.99KΩ,±1%, 2 R3-4
154 11140225 M/R 1/8W,12KΩ,±1%, 1 R55
155 11140173 M/R 1/8W,180KΩ,±1%, 1 R44
156 11140770 M/R 1/8W,115KΩ,±1%, 1 R40
157 11140228 M/R 1/8W,62KΩ,±1%, 1 R39
158 CR001196 RoHS semi finished
articles:IPA07 power board
IPA07 power board 1
159 18010039 Common Diode AN-D10039,DO-201AD,1N5401 3 D1,D3-4
160 18010110 Common Diode DO-201AD,1N5401 1 D5
161 18010117 Common Diode DO-201AD,1N5822 1 D9
162 18010017 Common Diode AN-D10017,DO-41,1N4004 1 D6

163 14020024 PNP TR 2SA1015GR,TO92,TOSHIBA 1 Q4
164 14010005 NPN TR HMPSA13,TO92 1 Q1
165 14010026 NPN TR 2SC1815GR,TO92,TOSHIBA 1 Q2
166 14010064 NPN TR 2SD1859,ATV,ROHM 1 Q3
167 14010084 NPN TR TIP41C,TO220,ST 1 U5
168 14040228 IC LM393N,DIP8,ST 1 U4
169 14040213 IC LM317T,TO220,ST 1 U3
170 14040194 IC NJM7809A,TO220,JRC 1 U1
171 11110019 MO/R 1/2W,680Ω,±5% 2 R7,R10
172 11110241 MO/R 5W,2.4Ω,±5% 1 R6
173 50030016 Metallic Polyester Cap 104,VDC100,±5%,yellow,7.2(W)*6.5(H)*2.5(T) 1 C29
174 11130655 C/R 1/4W,4.7Ω,±5%,P=5mm, feet is 4mm 1 R16
175 30020009 Fibre Tube Φ1*20*0.3mm,white 2 R6
177 50010063 C/C 104,VDC50,±10%,X7R,OD=9mm 4 C2,C22-23,C31
178 17010119 E/C 100uF/25V,±20%,-40/+85℃,Φ5*11mm,P=2.5mm,black,
feet is 4mm
4 C4,C13,C15,C25
179 17010287 E/C 1000uF/25V,±20%,-40/+85℃,Φ10*16mm,P=5mm,black,
feet is 4mm
1C1
180 17010260 E/C 470uF/35V,±20%,-40/+85℃,Φ10*16mm,P=5mm,black,
feet is 4mm
1 C28
181 17010159 E/C 4.7uF/50V,±20%,-40/+85℃,Φ5*11mm,P=2mm,black, feet
is 4mm
1 C14
182 17010256 E/C 470uF/25V,±20%,-40/+85℃,Φ8*14mm,P=3.5mm,black,
feet is 4mm
1 C10
183 17010079 E/C 4700uF/35V,±20%,-40/+85℃,Φ18*35,P=7.5mm,black, feet
is 4mm
1 C21
184 17010170 E/C 47uF/25V,±20%,-40/+85℃,Φ5*11mm,P=2mm,black, feet
is 4mm
3 C5,C30,C38
185 10490004 Insert sheet E665,P=5.0mm,T250 2 B+,B-
186 40370001 Male Jack AN-JP401,HT-2.54-02P-01A 1 LED1
187 40370003 Male Jack AN-JP401,HT-2.54-04P-01A 1 J3
188 40370099 Male Jack AN-JP410,3961-03,(P=3.96mm,180 degree) 1 J1
189 40370098 Male Jack AN-JP410,3961-02,(P=3.96mm,180 degree) 1 SW1
190 40370002 Male Jack AN-JP401,2532-03,(180 degree,P=2.5mm) 3 J2,J4-5
191 12010055 Slide Switch AN-S155,SS-22L-6P-G6 1 S2
192 30010009 Sleeve Φ3*10*0.20mm,UL,black 2 S2 of slide switch

193 10070012 Crystal Heatsink DN-MH7005,28*23.5,aluminum alloy. 1 Lock IC U3
194 10070018 Crystal Heatsink DN-MH7012,48*23.5,aluminum alloy. 1 Lock IC U5
195 70010086 Screw AN-C10086,M3*8mm,D5.5mm,black zinc 2 Assemble U3 U5 to heatsink
196 18040019 LED DIP,Φ3*5,GL-HEG14302 1
197 16010188 Ribbon Wire AN-W13S,2P,24#,UL1007,250mm 1 One end connect to LED1，the other end
solder with LED
198 30010004 Sleeve Φ2*10*0.20mm,UL,black 2 LED
199 16120122 Cable AN-WE122,2P,20#,UL1007,150mm,red. One end with
1.58D
1 Solder to IPOD charge switch
200 30010096 Sleeve Φ35*30*0.50mm,UL,black 1 power charge switch
201 CR001197 RoHS semi finished
articles:IPA07 power board
AI subassembly
IPA07 power board AI subassembly 1
202 26080026 PCB IPA07 POWER,FR4 single boardc,AN-B80026,green,V1.1 1
203 11080006 Jumper Φ0.6*7.5mm 1 JMP1
204 11080009 Jumper Φ0.6*10mm 1 JMP3
205 11080017 Jumper Φ0.6*20mm 1 JMP2
206 11140019 M/R 1/8W,100Ω,±1%, 1 R15
207 11140022 M/R 1/8W,200Ω,±1%, 1 R19
208 11140215 M/R 1/8W,3.3KΩ,±1%, 1 R5
209 11130052 C/R 1/8W,3KΩ,±5%, 1 R9
210 11130067 C/R 1/8W,10KΩ,±5%, 3 R22-24
211 11130073 C/R 1/8W,15KΩ,±5%, 3 R11,R13,R25
212 11130102 C/R 1/8W,200KΩ,±5%, 1 R14
213 11130114 C/R 1/8W,1MΩ,±5%, 2 R3,R8
214 11130221 C/R 1/4W,3.3KΩ,±5%, 1 R20
215 11130081 C/R 1/8W,33KΩ,±5%, 1 R1
216 11130094 C/R 1/8W,100KΩ,±5%, 1 R2
217 18010017 Common Diode AN-D10017,DO-41,1N4004 2 D7-8
218 18030011 Zener Diode AN-D30011,DO-41,1W,18V 1 Z1
219 18030025 Zener Diode AN-D30025,DO-35,1/2W,13V,BZX55C13 1 Z2
220 18030084 Zener Diode AN-D30084,DO-35,1/2W,3.3V,BZX55 1 Z4
221 18030089 Zener Diode AN-D30089,DO-35,1/2W,5.1V,BZX 55. 1 Z5

222 CR001198 RoHS semi finished
articles:IPA07 IPOD Board
IPA07 IPOD Board 1
223 17010433 E/C 330uF/16V,±20%,-40/+85℃,Φ8*12mm,P=3.5mm,black 2 C9-10
224 16050141 Shield Cable AN-W5139,5P,300mm,24#,UL2547 1 Male end to J4 of IPOD board,female end to
J5 of preamp board
225 16040572 Cable AN-W4146,2P,20#,UL1007,red and black, black L=
260mm,
1 Male end to J7 of power board,female end to
J3 of Ipod board
226 CR001210 RoHS semi finished
articles:IPA07 iPOD Board
SMT subassembly
IPA07 iPOD Board SMT subassembly 1
227 26020382 PCB IPOD,FR4 double side board,AN-B20149,green,1
ounce,V1.5
1
228 11170590 SMD Resistor 1/10W,549KΩ,±1%,0603 1 R11
229 11170226 SMD Resistor 1/8W,3.24KΩ,±1%,0805 4 R1-2,R5,R8
230 11170240 SMD Resistor 1/8W,4.7KΩ,±1%,0805 2 R3,R10
231 11170245 SMD Resistor 1/8W,5.62KΩ,±1%,0805 4 R4,R6-7,R9
232 11170879 SMD Resistor 1/10W,3.01KΩ,±1%,0603 1 R16
233 11170788 SMD Resistor 1/10W,1KΩ,±1%,0603 1 R22
234 11170326 SMD Resistor 1/8W,75KΩ,±1%,0805 2 R12,R14
235 11170637 SMD Resistor 1/8W,1Ω,±5%,0805 5 R17-21
236 11170315 SMD Resistor 1/8W,49.9KΩ,±1%,0805 2 R13,R15
237 50050075 SMD Ceramic Cap 104,VDC50,±10%,X7R,0805, 1 C1
238 50050086 SMD Ceramic Cap 10UF,VDC16,±10%,X7R,1206, 6 C2-7
239 50050096 SMD Ceramic Cap 151,VDC50,±5%,NPO,0805, 1 C8
240 14040155 IC NJM4580M,DMP8,JRC 1 U1
241 14040583 IC MC34063A,SOP8,ON 1 U3
242 60190034 IPOD Connector MFI514S0117(SMT) 1 J1
243 18030137 Zener Diode MBRS140LT3 40V,1A SMB 1 D1
244 24060062 Magnetic Core Inductance AN-I6053,220uH,1.16A,480.0m ohm,CDRH127-221K 1 L1
245 GR000198 RoHS Option :IPA07 IPA07 1
246 19020012 Glass Tube Fuse 750mA/250V,Φ5*20mm,slow-blow,UL,BEL 1 US shipment (5TT)
247 19020006 Glass Tube Fuse 315mA/250V,Φ5*20mm,slow-blow, CE.UL 1 EU shipment (littelfuse 218 series)
248 19020014 Glass Tube Fuse 1A/250V,Φ5*20mmslow-blow, CE.UL.JIS 1 JP shipment

249 13030175 EI Transformer AN-T30176,115/230V,26W 1 All except JP shipment
250 13030147 EI Transformer AN-T30150,26W,100V 1 JP shipment
251 12070002 Voltage Selector Switch AN-S702,HF-308II6B,(Silkscreen 120/240V) 1 Rear Panel
252 10100574 Panel DN-MC2188,V1.0,Aluminum alloy(small panel),material 1 US and JP shipment (to cover voltage selector
hole)
253 10100663 Panel DN-MC2188,aluminum alloy (small panel),black
painting,V1.0
1
254 70090014 Gasket Φ6*Φ3.2*0.3mm,steel, black zinc 2 For JP shipment
255 70070014 Nut Φ6*M3*2.5mm,black zinc 2 Assemble small panel for JP shipment
256 60190082 Battery AN-E1904,RT1250,12V,5AH,90(L)*70(W)*101(H) 1
257 60190079 Battery AN-E1903,HYS1250,12V,5AH 1
258 16070013 Power Cord AN-W915,3C,18#,SVT,1830mm,black 1 USA shipment
259 16070050 Power Cord AN-W953,3G,0.75mm2,H05VV-F,1830mm,black 1 EU shipment
260 16070080 Power Cord AN-W982,3C,0.75mm2,H05VV-F,1830mm,black 1 Australia Shipment
261 16070017 Power Cord AN-W920,3C,1.0mm2,H05VV-F,1830mm,black 1 UK shipment
262 16070073 Power Cord AN-W976,3C,0.75mm2,VCTF,1830mm,black 1 JP shipment
263 90200022 Sticker DN-YU019,20.5*6.5MM 4 1pc on unit,1pc on gift box,2pcs for master
carton, for Australia shipment
264 90220078 Label ALESIS,30*30mm,PANTONE 361C,V1.0 1 Top of master carton
265 90080018 Destination Label Brown paper,90*30mm,V1.0 2 US shipment
266 90080019 Destination Label Brown paper,112*30mm,V1.0 2 Germany shipment
267 90080020 Destination Label Brown paper,132*30mm,V1.0 2 UK shipment
268 90080022 Destination Label Brown paper,130*30mm,V1.1 2 Mexico shipment
269 90090233 Brand Label 55*27mm,V1.1 1 Mexico shipment (On battery )
270 90090234 Brand Label 76*64mm,V1.1 1 Mexico shipment(on side of gift box)
271 90090235 Brand Label 43*27mm,V1.1 1 Mexico shipment(on side of gift box)
272 90090236 Brand Label 55*27mm,V1.0 1 Mexico shipment (On battery )
273 56130001 Panel DN-MC2245,SPCC,T=1.5mm,white silkscreen ,V1.0 1 US shipment
274 56130005 Panel DN-MC2245,SPCC,T=1.5mm,white silkscreen,V1.0 1 JP shipment
275 56130004 Panel DN-MC2245,SPCC,T=1.5mm,white silkscreen,V1.0 1 EU shipment
276 ER000291 RoHS Package:IPA07 IPA07 1
277 60090017 MIC AN-E0916,DM-908 1 Accessories
278 90040605 UPC Label 38*26mm 3 2PCS on master carton，1PC on manual
In cabinet, optional, 60190082 can not be
used in JP shipment

279 90020847 S/N label 64*13mm V1.1 5
280 90070021 Warnning Label (PANTONE YELLOW 012C),70*18mm 1
281 90070022 Warnning Label IPA05,39.5*12.1mm,V1.0 1
282 90080001 Destination Label GA0/GA1/GA2 6 2PCS on gift box,4PCS on master
carton,under "MADE IN CHINA"
283 23100092 Box 250g+CE,270*65*60mm.V1.0(Pack mic) 1 Pack mic
284 23010295 PE Bag PE,160*260*0.025mm 1 For Manual
285 23010020 PE bag PE,120*280*0.06mm 1 For power cord
286 23010166 PE bag PE,600*600*0.06mm 1 For main unit
287 22050003 Drier 100g, silica gel 1 In PE bag with speaker
288 23020187 Polyfoam IPA05,412*325*100mm 2 For main unit
289 23070032 EPE sheet 320*350*2mm 2 L & R side of cabinet
290 22010522 Manual IPA07 manual,V1.1 1 Top of speaker
291 22010520 Manual ION version ,safety manual V13.8 1 Top of speaker
292 23090336 Gift Box IPA07,300g+B3+B3,413*338*434mm,color
printing,adhesive,V1.0
1 Pack main unit
293 23030873 Master Carton IPA07,A3A,423*346*448mm,black printing,adhesive,V1.0 1 Pack main unit