iPECS eMG80 Instruction Manual

iPECS eMG80 & eMG800 & UCP
Administration & Programming
Manual
Please read this manual carefully before operating System.
Retain it for future reference.

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
Revision History
SW version ISSUE DATE DESCRIPTION OF CHANGES
1.0
Sep., 2013
Initial Release
1.1
Dec., 2013
Changed Ericsson-LG to Ericsson-LG Enterprise
1.1.x
1.2
Feb., 2015
Update contents according to S/W integration for both eMG80 & eMG800
1.2.x 1.3 May, 2015 We updated the following features:
- On-line user guide
- Terminal attributes (Small popup use, large popup timer, SLT open
loop time)
- Web Access Authorization
- NTP attributes
- Digit Conversion Table
- System attributes
- U-LOOP, PBX code insertion for emergency call
- Disconnect with Inband information
- Temp License expiration notify
- Trace Log via Web
- Add System Date and Time to Installation wizard
2.0.x 1.4 Jan., 2016 - Added Speed code number plan in PGM100.
- IPCR announce only for incoming call.
- Updated Strong password in PGM 160/161.
- Updated ‘Do not overwrite station name in PGM 211.
- Added Attendant ring mode in PGM 257.
- Added the more item for Alarm in PGM 163.
- Added Flexible button default table (PGM 239)
- Added Preset flexible button default (PGM 240)
- Added System DST mode in PGM 439.
- Added LDAP server setting in PGM 160/161.
- Added Arabic language.
- Updated Message wait indication LED in PGM 112.
- Updated Company directory in Station Name Display.
- Added Station User Greeting in Station Data.
- Added the search box in Maintenance.
- Added MOH Management in Maintenance.
- Updated DB management by adding Comment field.
- Updated Install wizard
- DTMF repeat tone does not have nothing to do with PSTN in
PGM160-15
- Added Call wait signal and duration in PGM 113.
- Added some admin (Alternate/Secondary signal port, Local route ID,
Remote route ID, Sending Name option) in PGM 324.
- Added SLT Pulse and SLT pulse-MW type in PGM 110.
- Added Lift Handset for Page & Privacy in PGM 111.
- Added Short Modem in PGM 112.
- Added NFC Authorization Code use in PGM 112.
- Added rel 180 after 183 and “Add ‘user=phone’ param” in PGM 133.
- Added Short Modem Timer in PGM 182~182, 186
- Added Alarm mode to send email to the address in PGM 163.

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
- Added the special character to DB management.
- Added Ring detection register setting in Analog parameter.
- Added LCD Dimming for LIP-9000 Series & LDP-9240D in PGM 112.
- ‘Go to assignment’ function added to Personal group overview and
can check the master & member list at a glance.
- Added Station ICR scenario (1201) to Station Data.
- Changed the name from UCS Standard to UCS data.
- Added MOH management in Maintenance.
- Added Keyset admin password to Install Wizard.
2.0.x
1.5
April, 2016
- ‘Unified SMB A&P manual’ by integrating eMG and UCP.
2.1.x 1.6 August, 2016 - The type of Speed numbering is added more in PGM 100.
- ‘DDNS usage of Firewall’ & ‘Domain name of Firewall’ is added in
PGM 102.
- The LCD LED is changed to the option ‘MWI/Ring’ or ‘Ring’.
- The ACD & CRM function is added for UCS Client: CRM function
and ACD login/out & ACD On/Off duty in PGM 112.
- UCS Dialing Rule Use for Standard UCS in PGM 112.
- UCS Mobile Dial Use (Android) for Standard UCS in PGM 112.
- The description of CLI Name Display is changed, refer to PGM 113.
- Display full CLI function is added in PGM 113.
- SMTP Server Address fills out up to 64 characters in PGM 127.
- Proxy Server Address fills out up to 64 characters in PGM 133.
- The range for ICLID Usage is changed to Disable, CLI, Name/CLI in
PGM 140.
- Web hacking block is added in PGM 160; Web admin login failure
count to block, Web admin hacking block period, Wed admin
hacking Email notification.
- UCS Ring ACK count is added in PGM 160 and UCS Ring ACK
timer is added in PGM 180.
- SLT Line monitor and SLT Line Monitor time is added in PGM 160.
- Dial Back to Caller from Remote VM Access is added in PGM 160.
- Alarm Display is added in PGM 163.
- The range about Alarm is changed to Off, On, Alarm only,
Alarm/Email. Especially, the default of Maintenance Expire Notify is
Email only.
- Message wait (Call back) for LED flash is added in PGM 170.
- Outgoing Call type is added for All call or Answered call in PGM 177.
- Call log/Directory Auto Idle Timer is added in PGM 180.
- The range of Hot Desk for eMG and UCP is changed in PGM 250:
eMG80 (100), eMG800 (300), UCP (1200).
- Advice of Charge is added in PGM 133.
- SIP Profile is added in PGM 211.
- Signaling port, TLS Version, First & Second TLS crypto, SRTP
usage, First & Second SRTP crypto are added in PGM 212.
- Interworking system is added in PGM 322.
- Name option is deleted in PGM 327.
- Alarm display is added in PGM 335.
- Firewall IP is added in PGM 441.
- MS Excel-like table data management (copy/paste from/to the excel
file, Input/Edit) is to be extended to the following tables.
- PGM 105 : Flexible Station Number
- PGM 115/129 : Flexible Buttons

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
Copyright© 2013 Ericsson-LG Enterprise Co., Ltd. All Rights Reserved
This material is copyrighted by Ericsson-LG Enterprise Co., Ltd. (Ericsson-LG Enterprise). Any
unauthorized reproductions, use or disclosure of this material, or any part thereof, is strictly prohibited
and is a violation of Copyright Laws. Ericsson-LG Enterprise reserves the right to make changes in
specifications at any time without notice. The information furnished by Ericsson-LG Enterprise in this
material is believed to be accurate and reliable, but is not warranted to be true in all cases. If you are not
the intended recipient, you should destroy or retrieve this material to Ericsson-LG Enterprise.
iPECS is trademark of Ericsson-LG Enterprise Co., Ltd.
All other brand and product names are trademarks or registered trademarks of their respective
companies.
- PGM 202 : MSN Table
- PGM 206 : Prefix Dialing Table
- PGM 443 : Station User Login
- PGM 231 : Flexible DID Conversion
- PGM 262 : System Speed Dial
- PGM 3241 : Net Numbering Plan Table
- PGM 227 : Station/System Authorization Code Table
- PGM 442 : Remote Device Registration
- Station Name Display
- User Greeting is added to Maintenance.
- Company Directory is added to Maintenance.
- Web Certificate is added to Maintenance.
- Custom 1 and Custom 2 are added in Web Access Authorization and
User management.
- Line Echo added to SLT attributes in PGM 112.
- DSS in use added to LED Flashing Rates in PGM 170.
- Multiple Announcement (1~9) is added to IPCR Agent table in PGM
237.

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
i
Table of Contents
1. Introduction................................................................... 1
1.1 Manual Application..............................................................1
1.2 Manual Organization ...........................................................1
2. System & admin information ...................................... 3
2.1 System capacities for eMG and UCP ................................3
2.2 Slot configuration for eMG80.............................................9
2.3 Initialization........................................................................11
2.3.1 eMG Initialization........................................................................11
2.3.2 UCP Initialization ........................................................................13
2.3.2.1 Normal Registration Process .............................................................. 13
2.3.2.2 Replacement Module Registration ..................................................... 15
2.4 General Admin and Menu Structure................................16
3. STATION ADMIN PROGRAMMING for eMG ............ 17
3.1 General................................................................................17
3.1.1 LCD & Button Functions............................................................17
3.1.2 Alphanumeric Data Entries .......................................................17
3.2 Data Entry Mode ................................................................18
3.3 Procedure for Data Entry..................................................19
3.3.1 System ID — PGM 100 ...............................................................19
3.3.2 NUMBERING PLANS DATA — PGM 102 to 109 ......................21
3.3.2.1 System IP Address Plan — PGM 102................................................ 21
3.3.2.2 Device IP Address Plan -PGM 103 .................................................... 23
3.3.2.3 CO Device Sequence Number -PGM 104 ......................................... 27
3.3.2.4 Flexible Station Numbering Plan -PGM 105 ...................................... 28
3.3.2.5 Flexible Numbering Plan part A to D - PGM 106 to 109 .................... 29
3.3.2.6 8-Digit Table ....................................................................................... 35
3.3.3 Station Data –PGM 110-125.......................................................36
3.3.3.1 Station Type -PGM 110 ...................................................................... 36
3.3.3.2 Station Attributes I to III - PGM 111-113 ............................................ 37
3.3.3.3 Station Attributes IV -PGM 114 .......................................................... 47
3.3.3.4 Flexible button Assignment -PGM 115 ............................................... 52
3.3.3.5 Station Class-of-Service – PGM 116 ................................................. 56
3.3.3.6 CO/IP Group Access – PGM 117 ....................................................... 58

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
ii
3.3.3.7 Internal Page Zone Access – PGM 118 ............................................. 58
3.3.3.8 PTT (Push-To-Talk) Group Access – PGM 119 ................................ 59
3.3.3.9 Preset Call Forward – PGM 120 ........................................................ 59
3.3.3.10 Idle Line Selection – PGM 121 ......................................................... 60
3.3.3.11 Station IP Attributes – PGM 122 ...................................................... 61
3.3.3.12 Station Timers – PGM 123 ............................................................... 62
3.3.3.13 Linked Station Table – PGM 124 ..................................................... 63
3.3.3.14 ICM Tenancy Group – PGM 125 ...................................................... 64
3.3.3.15 Station VM Attributes – PGM 127 .................................................... 65
3.3.3.16 Station CCR Table – PGM 128 ........................................................ 67
3.3.3.17 LSS Label Edit – PGM 129 .............................................................. 68
3.3.4 BOARD DATA – PGM 130 to 132 ..............................................69
3.3.4.1 H.323 VoIP Attributes – PGM 130 ..................................................... 69
3.3.4.2 T1/E1/PRI Attributes – PGM 131 ....................................................... 72
3.3.4.3 Board Base Attributes – PGM 132 ..................................................... 73
3.3.5 CO LINE DATA – PGM 140 to 151.............................................75
3.3.5.1 CO Service Type – PGM 140 ............................................................. 75
3.3.5.2 CO/IP Attributes I ~ III - PGM 141~143 .............................................. 75
3.3.5.3 CO/IP Ring Assignment – PGM 144 .................................................. 86
3.3.5.4 DID Service Attributes – PGM 145 ..................................................... 87
3.3.5.5 DISA Service – PGM 146 ................................................................... 88
3.3.5.6 CO Line Preset Forward Attributes – PGM 147 ................................. 89
3.3.5.7 CO Additional Attributes – PGM 148 .................................................. 90
3.3.5.8 NA ISDN Line Attributes – PGM 150 ................................................. 91
3.3.5.9 ISDN CO Line Attributes – PGM 151 ................................................. 93
3.3.5.10 T1 Line Timers – PGM 152 .............................................................. 95
3.3.5.11 DCOB CO Attribute – PGM 153 ....................................................... 97
3.3.6 SYSTEM DATA –PGM 160 to 182..............................................98
3.3.6.1 System Attributes I & II – PGM 160 to 161 ........................................ 98
3.3.6.2 System Password – PGM 162 ......................................................... 108
3.3.6.3 Alarm Attributes – PGM 163 ............................................................. 109
3.3.6.4 Attendant Assignment – PGM 164 ................................................... 110
3.3.6.5 Multi-cast RTP/RTCP Ports – PGM 165 .......................................... 110
3.3.6.6 DISA COS – PGM 166 ..................................................................... 115
3.3.6.7 DID/DISA Destination – PGM 167 ................................................... 116
3.3.6.8 External Control Contacts – PGM 168 ............................................. 117
3.3.6.9 LCD Display Mode -PGM 169 .......................................................... 117
3.3.6.10 Button LED Flash Rate – PGM 170 ............................................... 119
3.3.6.11 Music Sources – PGM 171............................................................. 122
3.3.6.12 PABX Access Codes – PGM 172 .................................................. 123
3.3.6.13 Ringing Line Preference Priority – PGM 173 ................................. 123
3.3.6.14 RS-232 Port Settings – PGM 174 .................................................. 124

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
iii
3.3.6.15 Serial Port Function Selections – PGM 175 ................................... 125
3.3.6.16 Break/Make Ratio – PGM 176 ....................................................... 127
3.3.6.17 SMDR Attributes – PGM 177 ......................................................... 127
3.3.6.18 System Date, Time and Daylight Saving Time (DST) – PGM 178 132
3.3.6.19 Multi Language – PGM 179............................................................ 133
3.3.6.20 System Timers I to III - PGMs 180-182 .......................................... 133
3.3.6.21 In-Room Indication – PGM 183 ...................................................... 138
3.3.6.22 DCOB SYS Timers – PGM 186 ..................................................... 139
3.3.6.23 NTP Attributes – PGM 195 ............................................................. 140
3.3.6.24 CRR Attributes – PGM 252 ............................................................ 141
3.3.6.25 VM COS Attributes – PGM 253 ...................................................... 142
3.3.6.26 Personal Group – PGM 260 ........................................................... 143
3.3.6.27 Personal Group Attribute – PGM 261 ............................................ 144
3.3.7 STATION GROUP DATA – PGM 190 & 192............................145
3.3.7.1 Station Group Assignment -PGM 190 .............................................. 146
3.3.7.2 Station Group Attributes – PGM 191 ................................................ 147
3.3.7.3 Pick Up Group Assignment – PGM 192 ........................................... 162
3.3.8 ISDN LINE & ICLID ROUTING DATA – PGM 200-206............163
3.3.8.1 ISDN Attributes – PGM 200 ............................................................. 163
3.3.8.2 CLIP/COLP Table – PGM 201 ......................................................... 164
3.3.8.3 MSN Table – PGM 202 .................................................................... 165
3.3.8.4 ICLID Route Table – PGM 203 ........................................................ 166
3.3.8.5 ICLID Ring Assignment – PGM 204 ................................................. 167
3.3.8.6 PPP Attributes – PGM 205 ............................................................... 168
3.3.8.7 Prefix Dialing Table – PGM 206 ....................................................... 169
3.3.9 TABLES DATA – PGM 220 to 235...........................................171
3.3.9.1 LCR Assignment Tables - PGM 220 to 223 ..................................... 171
3.3.9.2 Toll Tables – PGM 224 ..................................................................... 177
3.3.9.3 Emergency Code Table – PGM 226 ................................................ 178
3.3.9.4 Authorization Codes Table – PGM 227 ............................................ 178
3.3.9.5 Customer Call Routing/VSF AA Table – PGM 228 .......................... 179
3.3.9.6 Executive/Secretary Table – PGM 229 ............................................ 181
3.3.9.7 Flexible DID Conversion Table – PGM 231 ..................................... 182
3.3.9.8 System Speed Zone Table – PGM 232 ........................................... 184
3.3.9.9 Auto Ring Mode – PGM 233 ............................................................ 185
3.3.9.10 Voice Mail Dialing Table – PGM 234 ............................................. 186
3.3.9.11 Registration & Fractional Module Table – PGM 235 ...................... 187
3.3.9.12 Mobile Extension Table – PGM 236 ............................................... 188
3.3.9.13 Hot Desk Attributes – PGM 250 ..................................................... 190
3.3.9.14 CO Call Rerouting – PGM 252 ....................................................... 191
3.3.9.15 Digit Conversion Tables – PGM 270 .............................................. 192
3.3.10 NETWORKING DATA – PGM 320 to 324 ..............................194

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
iv
3.3.10.1 Network Basic Attribute – PGM 320 ............................................... 194
3.3.10.2 Network Supplementary Attribute – PGM 321 ............................... 195
3.3.10.3 Network CO LINE Attribute – PGM 322 ......................................... 196
3.3.10.4 NET Numbering Plan Table – PGM 324 ........................................ 197
3.3.10.5 Network Feature Code Table – PGM 325 ...................................... 199
3.3.11 TNET (Centralized Networking) – PGM 330 ~ 336...............200
3.3.11.1 TNET Basic Attributes – PGM 330 ................................................. 200
3.3.11.2 TNET CM Attributes – PGM 331 .................................................... 201
3.3.11.3 TNET LM ATTRIBUTES – PGM 332 ............................................. 202
3.3.11.4 FoPSTN Attributes – PGM 333 ...................................................... 203
3.3.11.5 TNET LM External Contact Attributes – PGM 334 ......................... 204
3.3.11.6 TNET LM Music Attributes – PGM 335 .......................................... 205
3.3.11.7 TNET LM Alarm Attributes – PGM 336 .......................................... 206
3.3.12 Zone Data – PGM 436 - 441, 444 ...........................................207
3.3.12.1 Zone Holiday Assignment – PGM 444 ........................................... 208
3.3.13 GREEN MODE.........................................................................209
3.3.13.1 Green mode activation – PGM 500 ................................................ 209
3.3.13.2 Green mode time setting – PGM 501 ............................................. 210
3.3.14 INITIALIZATION — PGM 450..................................................211
3.3.15 PRINT-OUT DATABASE — PGM 451....................................213
3.3.16 VIRTUAL TRACE DIP-SWITCH — PGM 452.........................215
3.3.17 VIRTUAL DIP-SWITCH — PGM 453 ......................................217
3.3.18 DECT ATTRIBUTES — PGM 491...........................................218
4. WEB SERVICE .......................................................... 219
4.1 General..............................................................................219
4.1.1 PC/Browser ...............................................................................219
4.1.2 Environment for LAN connection...........................................219
4.1.3 Web Browser setting................................................................220
4.1.4 Password Encryption...............................................................220
4.2 iPECS system Web Access & Login .............................221
4.3 Web Admin & Maintenance Main Page Overview........223
4.3.1 Favorite Program Groups........................................................227
4.3.2 Using Function Base................................................................229
4.3.3 iPECS Web Page Navigation...................................................233
4.3.4 General Web Page Features....................................................233
4.3.4.1 Web Page Range Entries ................................................................. 233
4.3.4.2 Table Check Boxes .......................................................................... 233
4.3.4.3 Sorting Displayed Data ..................................................................... 233

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
v
4.3.5 Install wizard .............................................................................234
4.3.5.1 System Upgrade ............................................................................... 234
4.3.5.2 Nation Code ...................................................................................... 235
4.3.5.3 Set System Time and Date .............................................................. 235
4.3.5.4 Set Station Number .......................................................................... 236
4.3.5.5 Set Flexible Numbering Plan ............................................................ 236
4.3.5.6 Set CO Ring Assignment ................................................................. 237
4.3.5.7 Set License Upload .......................................................................... 237
4.3.5.8 Set Maintenance ID & Password ..................................................... 238
4.3.5.9 Set IP Information ............................................................................. 239
4.4 Web Admin Programming ..............................................240
4.4.1 System ID & Numbering Plans................................................240
4.4.1.1 System ID – PGM 100 ...................................................................... 241
4.4.1.2 System Overview .............................................................................. 245
4.4.1.3 Device Port Number Change – PGM 101 ........................................ 248
4.4.1.4 System IP Plan - PGM 102 .............................................................. 250
4.4.1.5 Device IP Plan - PGM 103 ............................................................... 253
4.4.1.6 CO Device Sequence Number - PGM 104 ...................................... 255
4.4.1.7 Flexible Station Numbering Plan - PGM 105 ................................... 256
4.4.1.8 Flexible Numbering Plan - PGM 106 ~ 109 ..................................... 258
4.4.1.9 8 Digit Extension Table - PGM 238 .................................................. 262
4.4.2 Station Data...............................................................................263
4.4.2.1 Station Type - PGM 110 ................................................................... 264
4.4.2.2 Common Attributes - PGM 111 ........................................................ 265
4.4.2.3 Terminal Attributes - PGM 112 ......................................................... 272
4.4.2.4 CLI Attributes - PGM 113 ................................................................. 276
4.4.2.5 Flexible Buttons - PGM 115/129 ...................................................... 279
4.4.2.6 Station COS - PGM 116 ................................................................... 281
4.4.2.7 CO/IP Group Access - PGM 117 ..................................................... 283
4.4.2.8 Internal Page Zone Access - PGM 118 ............................................ 284
4.4.2.9 PTT Group Access - PGM 119 ........................................................ 286
4.4.2.10 Preset Call Forward - PGM 120 ..................................................... 287
4.4.2.11 Station ICR Scenario - PGM 1201 ................................................. 288
4.4.2.12 Idle Line Selection - PGM 121 ........................................................ 289
4.4.2.13 Station IP Attributes - PGM 122 ..................................................... 290
4.4.2.14 Station Timers - PGM 123 .............................................................. 291
4.4.2.15 Linked Station - PGM 124 .............................................................. 292
4.4.2.16 Station ICM Group - PGM 125 ....................................................... 294
4.4.2.17 Station Voice Mail Attributes – PGM 127 ....................................... 295
4.4.2.18 Station Personal CCR Table – PGM 128 ....................................... 299
4.4.2.19 Station Name Overview & Display ................................................. 301
4.4.2.20 Station User Greeting ..................................................................... 303

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
vi
4.4.2.21 Station Data Copy .......................................................................... 304
4.4.2.22 Station CTI IP Address (1st Party TAPI) ......................................... 305
4.4.2.23 Station Recording Information ........................................................ 306
4.4.3 Board Based Data.....................................................................307
4.4.3.1 H.323 VoIP Attributes - PGM 130 .................................................... 308
4.4.3.2 T1/E1/PRI Attributes - PGM 131 ...................................................... 311
4.4.3.3 Board Base Attributes - PGM 132 .................................................... 312
4.4.4 CO Line Data.............................................................................314
4.4.4.1 Common Attributes - PGM 140 ........................................................ 316
4.4.4.2 Analog Attributes - PGM 141 ............................................................ 321
4.4.4.3 VoIP Attributes - PGM 142 ............................................................... 323
4.4.4.4 ISDN Attributes - PGM 143 .............................................................. 324
4.4.4.5 CO/IP Ring Assignment - PGM 144 ................................................. 326
4.4.4.6 DID Service Attributes - PGM 145 .................................................... 327
4.4.4.7 DISA Service Attributes - PGM 146 ................................................. 328
4.4.4.8 CO/IP Preset Forward Attributes - PGM 147 ................................... 329
4.4.4.9 MATM Attributes - PGM 149 ............................................................ 330
4.4.4.10 NA ISDN Line Attributes - PGM 150 .............................................. 332
4.4.4.11 CID/CPN Attributes - PGM 151 ...................................................... 334
4.4.4.12 T1 CO Line Attributes - PGM 152 .................................................. 337
4.4.4.13 DCOB CO Line Attributes - PGM 153 ............................................ 339
4.4.5 System Data..............................................................................340
4.4.5.1 System Attributes - PGM 160 & 161 ................................................ 341
4.4.5.2 System Password - PGM 162 .......................................................... 352
4.4.5.3 Alarm Attributes - PGM 163 ............................................................. 353
4.4.5.4 Attendant Assignment - PGM 164 .................................................... 355
4.4.5.5 Multi-cast IP/Port - PGM 165 ............................................................ 356
4.4.5.6 DISA COS - PGM 166 ...................................................................... 362
4.4.5.7 DID/DISA Destination - PGM 167 .................................................... 363
4.4.5.8 External Control Contacts - PGM 168 .............................................. 364
4.4.5.9 LCD Display Mode - PGM 169 ......................................................... 365
4.4.5.10 LED Flashing Rate - PGM 170 ....................................................... 367
4.4.5.11 Music Sources - PGM 171 ............................................................. 370
4.4.5.12 PBX Access Codes - PGM 172 ...................................................... 371
4.4.5.13 Ringing Line Preference Priority - PGM 173 .................................. 372
4.4.5.14 RS-232 Port Settings - PGM 174 ................................................... 373
4.4.5.15 Serial Port Selections - PGM 175................................................... 374
4.4.5.16 Pulse Dial (Break/Make) Ratio - PGM 176..................................... 375
4.4.5.17 SMDR Attributes - PGM 177 .......................................................... 376
4.4.5.18 System Date & Time - PGM 178 .................................................... 379
4.4.5.19 System Multi Language - PGM 179 ............................................... 380
4.4.5.20 System Timers - PGM 180 ~ 182 & 186 ........................................ 381

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
vii
4.4.5.21 In-Room Indication - PGM 183 ....................................................... 386
4.4.5.22 Web Access Authorization ............................................................. 387
4.4.5.23 Station Web Access Authorization ................................................. 388
4.4.5.24 NTP Attributes - PGM 195 .............................................................. 389
4.4.5.25 SNMP Attribute - PGM 196 ............................................................ 390
4.4.5.26 Cabinet Attribute for UCP - PGM 197 ............................................ 392
4.4.5.27 Hot Desk Attributes - PGM 250 ...................................................... 393
4.4.5.28 System Call Routing - PGM 251 .................................................... 394
4.4.5.29 CO Call Rerouting - PGM 252 ........................................................ 396
4.4.5.30 VM COS Attributes – PGM 253 ...................................................... 398
4.4.5.31 Static Route Attributes – PGM 254 ................................................ 399
4.4.5.32 Access Control List – PGM 255 ..................................................... 400
4.4.5.33 Attendant Ring Mode – PGM 257 .................................................. 401
4.4.5.34 System Speed Dial ......................................................................... 402
4.4.5.35 Custom Messages .......................................................................... 403
4.4.5.36 PPTP Attributes .............................................................................. 404
4.4.5.37 PPP Attributes for eMG – PGM 205 ............................................... 405
4.4.6 Station Group Data...................................................................406
4.4.6.1 Station Group Overview ................................................................... 407
4.4.6.2 Station Group Assignment - PGM 190 ............................................. 408
4.4.6.3 Station Group Attributes - PGM 191 ................................................ 409
4.4.6.4 Pick Up Group Overview .................................................................. 426
4.4.6.5 Pick Up Group - PGM 192 ................................................................ 427
4.4.6.6 Personal Group Overview ................................................................ 428
4.4.6.7 Personal Group - PGM 260 .............................................................. 429
4.4.6.8 Personal Group Attribute - PGM 261 ............................................... 430
4.4.7 ISDN Line Data..........................................................................431
4.4.7.1 ISDN Attributes - PGM 200 .............................................................. 432
4.4.7.2 CLIP/COLP Table - PGM 201 .......................................................... 433
4.4.7.3 MSN Table - PGM 202 ..................................................................... 434
4.4.7.4 ICLID Route Table - PGM 203 ......................................................... 435
4.4.7.5 ICLID Ring Assignment Table - PGM 204 ....................................... 436
4.4.7.6 PPP Attributes for UCP - PGM 205 .................................................. 437
4.4.7.7 Prefix Dialing Table - PGM 206 ........................................................ 438
4.4.7.8 ISDN Clock Priority for eMG800 - PGM 207 .................................... 440
4.4.8 SIP Data .....................................................................................441
4.4.8.1 SIP Common (System based) Attributes - PGM 210 ....................... 442
4.4.8.2 SIP Trunk Status Overview .............................................................. 446
4.4.8.3 SIP CO Attributes - PGM 133 ........................................................... 447
4.4.8.4 SIP Registration Status Overview .................................................... 460
4.4.8.5 SIP UID Allocation Status Overview ................................................ 461
4.4.8.6 SIP User ID Attributes – PGM 126 ................................................... 462

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
viii
4.4.8.7 SIP Phone Attributes - PGM 211...................................................... 464
4.4.8.8 SIP Phone Provisioning - PGM 212 ................................................. 470
4.4.8.9 Provisioning File View & Delete ....................................................... 474
4.4.8.10 VMEX Station Data - PGM 215 ...................................................... 475
4.4.8.11 VMEX Connection table - PGM 216 ............................................... 476
4.4.9 Tables Data................................................................................477
4.4.9.1 LCR Control Attributes - PGM 220 ................................................... 478
4.4.9.2 LCR LDT (Leading Digit Table) - PGM 221 ..................................... 480
4.4.9.3 LCR DMT (Digit Modification Table) - PGM 222 .............................. 482
4.4.9.4 LCR Table Initialization - PGM 223 .................................................. 484
4.4.9.5 Digit Conversion Table - PGM 270 .................................................. 485
4.4.9.6 Toll Exception Table - PGM 224 ...................................................... 486
4.4.9.7 Emergency Code Table - PGM 226 ................................................. 487
4.4.9.8 COS Table ........................................................................................ 488
4.4.9.9 Authorization Codes Table - PGM 227 ............................................ 489
4.4.9.10 Customer Call Routing Table - PGM 228....................................... 493
4.4.9.11 Executive/Secretary Table - PGM 229 ........................................... 495
4.4.9.12 Flexible DID Conversion Table - PGM 231 .................................... 497
4.4.9.13 System Speed Zone Table - PGM 232 .......................................... 499
4.4.9.14 Auto Ring Mode Table - PGM 233 ................................................. 500
4.4.9.15 Voice Mail Dialing Table - PGM 234 .............................................. 501
4.4.9.16 Registration Table - PGM 235 ........................................................ 503
4.4.9.17 Mobile Extension Table - PGM 236 ............................................... 504
4.4.9.18 IPCR Agent Table - PGM 237 ........................................................ 506
4.4.9.19 Dummy Dial-Tone Digit Table ........................................................ 507
4.4.9.20 Flexible Button Default Table – PGM 239 ...................................... 508
4.4.9.21 Preset Flexible Button Default – PGM 240 .................................... 509
4.4.10 Networking Data .....................................................................510
4.4.10.1 Network Basic Attributes - PGM 320 .............................................. 511
4.4.10.2 Network Supplementary Attributes - PGM 321 .............................. 512
4.4.10.3 Net CO Line Overview .................................................................... 513
4.4.10.4 Network CO Line Attributes - PGM 322 ......................................... 514
4.4.10.5 Network Numbering Plan Table Overview ..................................... 515
4.4.10.6 Network Numbering Plan - PGM 324 ............................................. 516
4.4.10.7 Network Feature Code Table - PGM 325 ...................................... 519
4.4.11 H.323 Routing Table...............................................................520
4.4.11.1 H.323 Basic Attributes -PGM 326 .................................................. 521
4.4.11.2 H.323 CO Group Attributes -PGM 327 ........................................... 522
4.4.11.3 H.323 Incoming Route table -PGM 328 ......................................... 524
4.4.12 T-NET Data ..............................................................................525
4.4.12.1 T-NET Basic Attributes -PGM 330 ................................................. 526
4.4.12.2 T-NET CM Attributes -PGM 331 .................................................... 527

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
ix
4.4.12.3 T-NET LM Attributes -PGM 332 ..................................................... 528
4.4.12.4 T-NET FoPSTN table -PGM 333 .................................................... 529
4.4.12.5 T-NET Control Contact -PGM 334 ................................................. 530
4.4.12.6 T-NET Music/Alarm -PGM 335 ~ 336 ............................................ 531
4.4.12.7 T-NET ISDN Clock Priority for eMG800 - PGM 337 ...................... 532
4.4.13 Zone Data ................................................................................533
4.4.13.1 Zone Number Overview ................................................................. 534
4.4.13.2 Device Zone Number – PGM 436 .................................................. 535
4.4.13.3 Device Zone Attributes – PGM 437 ................................................ 536
4.4.13.4 Access & Page Relay – PGM 438 ................................................. 538
4.4.13.5 Inside Zone Attributes Overview .................................................... 539
4.4.13.6 Zone Attribute – PGM 439 .............................................................. 540
4.4.13.7 Zone RTP Relay Group – PGM 440 .............................................. 543
4.4.13.8 Inter Zone Attribute – PGM 441 ..................................................... 544
4.4.13.9 Zone Holiday Assignment - PGM 444 ............................................ 546
4.4.14 Device Login ...........................................................................547
4.4.14.1 Remote Device Registration – PGM 442 ....................................... 548
4.4.14.2 Station User Login – PGM 443 ...................................................... 549
4.4.15 UCS Data .................................................................................551
4.4.15.1 Common Attributes – PGM 445 ..................................................... 552
4.4.15.2 UCS Standard Client Login – PGM 446 ......................................... 554
4.4.15.3 UCS Premium Client Login – PGM 446 ......................................... 556
4.4.15.4 UCS Standard Client Attributes – PGM 447 .................................. 558
4.4.15.5 Administrative Message – PGM 448 .............................................. 559
4.4.15.6 UCS Standard Client Audio Setting – PGM 449 ............................ 560
4.4.16 DECT Data...............................................................................562
4.4.16.1 DECT Registration (0#) .................................................................. 563
4.4.16.2 DECT ATTRIBUTES - PGM 491 .................................................... 565
4.4.16.3 DECT Multi-zone support ............................................................... 566
4.4.17 Hotel Data................................................................................567
4.4.18 Green Mode for eMG - PGM 500 ...........................................568
4.4.18.1 Green mode activation ................................................................... 569
4.4.18.2 Green Mode Time Setting .............................................................. 570
4.4.19 Redundancy Data for UCP600 & 2400..................................571
4.4.19.1 Redundancy Attributes – PGM 502 ................................................ 572
4.4.19.2 Redundancy IP Address – PGM 503 ............................................. 573
4.4.20 Initialization - PGM 450 ..........................................................574
4.4.20.1 Initialization Table - PGM 450 ........................................................ 575
4.5 Maintenance.....................................................................576
4.5.1 S/W Upgrade .............................................................................578
4.5.1.1 File Upload ....................................................................................... 579

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
x
4.5.1.2 Upgrade Process .............................................................................. 580
4.5.1.3 Upgrade HTML Files ........................................................................ 582
4.5.1.4 WTIB Base upgrade Process for eMG800 ....................................... 583
4.5.2 Database....................................................................................584
4.5.2.1 Database Upload .............................................................................. 584
4.5.2.2 Database management .................................................................... 584
4.5.3 Multi Language .........................................................................585
4.5.3.1 Multi Language File Upload .............................................................. 585
4.5.3.2 Multi Language File Download ......................................................... 585
4.5.4 SMDR .........................................................................................586
4.5.5 File System................................................................................587
4.5.5.1 File View & Delete ............................................................................ 587
4.5.5.2 File System Information .................................................................... 587
4.5.6 MOH (Music On-Hold) Management.......................................588
4.5.6.1 MOH Delete & Download ................................................................. 588
4.5.6.2 MOH Upload ..................................................................................... 588
4.5.7 License Install...........................................................................589
4.5.7.1 License upload ................................................................................. 590
4.5.7.2 Gateway License for UCP ................................................................ 590
4.5.7.3 Temp License Activation .................................................................. 591
4.5.8 DECT Statistics Feature...........................................................592
4.5.9 VSF Prompt Upload..................................................................593
4.5.9.1 Prompt selection ............................................................................... 593
4.5.9.2 Prompt Upload/Delete ...................................................................... 594
4.5.9.3 Individual Upload .............................................................................. 595
4.5.10 VSF System Greeting.............................................................596
4.5.10.1 Individual Upload ............................................................................ 596
4.5.10.2 Individual download ........................................................................ 597
4.5.10.3 System greeting Upload ................................................................. 597
4.5.10.4 System greeting Download ............................................................ 598
4.5.11 User Greeting..........................................................................599
4.5.11.1 User Greeting Upload ..................................................................... 599
4.5.11.2 User Greeting Download ................................................................ 600
4.5.12 Company Directory ................................................................601
4.5.12.1 CDN Upload ................................................................................... 601
4.5.12.2 CDN Download ............................................................................... 602
4.5.13 Voice Mail Management.........................................................603
4.5.13.1 Voice Mail Delete ............................................................................ 603
4.5.13.2 Voice Mail USB Backup ................................................................. 604
4.5.14 Function program...................................................................605

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
xi
4.5.14.1 User Function Management Page ................................................. 605
4.5.15 User Management...................................................................609
4.5.15.1 Company (Tenant group) Administrator Account ........................... 609
4.5.16 Trace ........................................................................................611
4.5.17 TDM Gain Control...................................................................612
4.5.18 IP Gain Control .......................................................................613
4.5.19 Tone/ Ring Gain & Cadence Control....................................613
4.5.20 Appliances Control.................................................................614
4.5.21 Web Certificate .......................................................................614
4.6 On-Line web user guide..................................................617
Appendix A Program Codes ....................................... 618
Appendix B Flexible Numbering Plan (Web based) . 620
Appendix C Database Details & Default for Station
Administration for eMG ............................................... 630

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
1
1. INTRODUCTION
1.1 Manual Application
This document provides detailed information covering the configuration of the eMG/UCP
database and maintenance of the eMG/UCP. The manual also details the power-up and
initialization routines and the Station Web Portal.
The manual is written for the experienced installer with knowledge of telephony terms, and
functions of small and mid-sized business telecommunications systems.
1.2 Manual Organization
This manual is organized in ten (10) major sections including:
 Section 1 Introduction: This section introduces the content and organization of the
manual.
 Section 2 System & Admin Information: In this section general information on
System capacities, power-up routines and the system initialization process are detailed.
Also, this section discusses the process for registration of IP and softphones with the
system.
 Section 3 Station Administration for eMG: This section provides details on
configuring the eMG system employing a station allowed administrative access. Step
by step procedures are given along with brief but concise descriptions of the various
configuration parameters and available settings. We recommend that you use Section
4 Web administration.
 Section 4 Web Administration: Similar to the Station Administration section, the Web
Administration section gives step by step procedures and descriptions for the
configuration parameters and settings available using a Web browser.
- Section 4.5 Maintenance: The Maintenance section provides details on managing
the eMG including database upload and download, software upgrade, and user
access management using the Web browser interface.
- Section 4.6 Station Program: This section discusses the configuration of the
features and functions available in the portal.
- Section 4.7 On-line web user guide: This section explains the frequent use of
features to a user. We didn’t describe this section because you can easily get the
information on the web by clicking [User’s guide] of login page.
 Appendix A: The Station and Attendant Station User Program codes are listed with the
associated function. These fixed codes are available at the iPECS IP or LDP phones to
configure basic functions such as ring tones, activate features and assign features and
functions to Flex buttons.
 Appendix B: A complete listing of the nine basic Flexible Numbering Plans. One is

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
2
selected as the system’s Flexible Numbering Plan. Each of the basic Numbering Plans
includes all feature and resource access codes, and any individual code can be
changed.
 Appendix C: This Appendix includes a detailed listing of all the configurable
parameters by Program group and includes the default values for each parameter. It is
only for eMG Station Administration.

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
3
2. SYSTEM &ADMIN INFORMATION
2.1 System capacities for eMG and UCP
iPECS eMG is available in several hardware configurations based on the Main board of the KSU.
Upon initialization, the software will structure a database for the maximum possible station and
CO/IP Line configurations. Thus, the software port count capacities will differ from the hardware
count however, the hardware limitations always apply. The total System ports supported by the
software include the Station ports, CO/IP Line ports and ports for various options including the
integrated AA/VM, Miscellaneous ports, etc. Other than the Station and CO/IP Line ports, the
hardware and software capacities are the same. The capacities relative to the software are
provided in the table below.
Table 2.1-1 eMG80 Software Capacities
Item Capacity
CO/Trunk lines Max. 74
Stations
Max. 140
Attendants 4
LAN port
2 (1 each, KSU and VVMU)
Modem Channel
1 (MODU)
Serial Port(RS-232C)
1
USB(2.0) Host port 1
Alarm/Doorbell input
2 (1 per KSU)
External Control Relays 2 (1 per KSU)
Music Source Inputs
1 Internal: select one of 13 melodies
1 External source input
5 SLT ports
3 VSF announcements
Power Fail Circuit
Max. 6 (1 per KSU, EKSU, CH204, CH408, CS416)
VSF Device 1: Built-in AA/VM
w/MEMU
w/MEMU2
VSF Device 2 (VVMU)
8 channels(2 Chan. by default, 1 Channel by license), 1 hour
15 hours(no license needed)
60 hours(no license needed)
8 channels (by license) & 15 hours(by license), 1 hour(by default)
Conference channels 148 channels/13 party per group
WTIB
1
DECT Phones 48
Built-in VoIP channels
8 (2 channels by default, 6 channels by license)
VVMU VoIP channels 8 (by license)
IP Stations and SIP Trunks
48 port (32 Stations+16 SIP Trunks)
External Page 1 port
Internal Page
35 zones
System Speed Dial 3000 numbers, 25 digits each

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
4
Item Capacity
System Speed Dial Zones (Groups)
10 zones
Station Speed Dial
100 per station, 25 digits each (Max. 4000 numbers)
Last Number Redial
10 numbers
Save Number Redial
1 number
DSS Consoles per Station
3
Serial DSS - System
100
Serial DSS – Station (LIP-8000)
4
Serial DSS – Station (LIP-9000)
1
SMDR buffer
5000
CO Line Groups
20
Station & Station Groups
40
Station & Station Group Members
70
Pickup Group
50
Pickup Group Member
140
Conference Groups - System
40
Conference Groups - Station
20 per station
Executive/Secretary pairs
36
Authorization Codes
500 (Station: 140, System: 360)
Transparent Networking Table
15
ICLID Routing table
250
Tenancy (ICM) Group
15
Attendant Station
4
DID Digits Analysis
4
MSN Table
500
Table 2.1-2 eMG800 Software Capacities
Item Capacity
CO/Trunk lines
Max. 600
Stations
Max. 1200
Attendants
5
LAN port
MPB(1), VOIB(1), VMIB(1)
Modem Channel
1(MODU)
Serial Port(RS-232C)
1
USB(3.0) Host port
1
Alarm/Doorbell input
1
External Control Relays
2 (1 per KSU)
Music Source Inputs
1 Internal: select one of 13 melodies
1 External source input
5 SLT ports
3 VSF announcements
Power Fail Circuit
1 port / 1 LCOB
VSF Device
VMIU
VMIB
4ch, 1 hours
8ch, 100 hours

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
5
Item Capacity
Conference channels
148 channels/13 party per group
WTIB
3
DECT Phones
192
Built-in VoIP channels
8 (4 channel by default)
VOIB128 channels
128 (32 channel by default)
IP Stations and SIP Trunks
600
External Page
1 port
Internal Page
100 zones
System Speed Dial
8000 numbers, 25 digits each
System Speed Dial Zones (Groups)
10 zones
Station Speed Dial
100 per station, 25 digits each (Max. 12,000 numbers)
Last Number Redial
10 numbers
Save Number Redial
1 number
DSS Consoles per Station
3
Serial DSS - System
500
Serial DSS – Station (LIP-8000)
4
Serial DSS – Station (LIP-9000)
1
SMDR buffer
30,000
CO Line Groups
200
Station & Station Groups
200
Station & Station Group Members
200
Pickup Group
200
Pickup Group Member
12,000
Conference Groups - System
160
Conference Groups - Station
100 per station
Executive/Secretary pairs
100
Authorization Codes
2,400 (Station: 1,200/System: 1,200)
Transparent Networking Table
32
ICLID Routing table
250
Tenancy (ICM) Group
32
Attendant Station
5
DID Digits Analysis
4
MSN Table
1,500