iPhone iSAPPOS 4 User manual

iSAPPOS 4/5 iPhone Jacket

Getting Ready with the Jacket
1
1
Package contents
System Overview
Getting started

Section 1
Package Contents
iPhone Scanner Jacket
Micro-USB cable
Quick user guide
Hand strap
2

Section 2
System Overview
Unit: mm
3
1Power switch
iSAPPOS 4 iSAPPOS 5
1
2
4
5
3
3 3
2Hand strap hook
3Scan buttons
4Battery status button
5Battery status LED

Section 3
Getting Started
Using the jacket with an iPhone
1. Power on the device
2. Angle the iPhone as below and twist it to expand the soft edge of the jacket. Make sure to align the
lightning port on the iPhone with the lightning connector on the jacket.
4

3. Take the unit and snap the top corners into the jacket. Double check the sides and corners to make
sure everything is in place and secured.
4. To remove the iPhone, bend the top corners of the jacket. Place your finger in between the jacket
and the iPhone, and pull the iPhone up and out of the jacket. Be careful not to damage the lighting
connector at the bottom of the jacket.
5

Section 4
Other information
Install app
* The SteakPhone app is only an app to demonstrate the functions of the jacket. It is not suitable to be used in an actual business environment.
Documentations & Support
To obtain more information about the product, please visit pos-x.com
6
iSAPPOS SteakHouse Mobile POS
Mobile

7
Running and using the App
2
Turn on Bluetooth
SteakPhone (Demo) App

Section 1
Turn on Bluetooth
Pairing with the jacket
The app will help you set up the jacket with your iPhone. As the jacket communicates with your
iPhone through Bluetooth, please make sure Bluetooth is enabled on your iPhone before launching
the app. You can enable Bluetooth by going to .
8
1
2
3

Section 2
SteakPhone (Demo) App
About the app
The app presents a simple demonstration of the functions in the iSAPPOS iPhone jacket. The
app allows the jacket to be paired with the iPhone through Bluetooth and is the only way they
can be paired together.
Pairing the jacket with the iPhone
Make sure the jacket has been powered on before launching the app.
Launch the app and it should immediately find the jacket. Tap to select the jacket you wish to pair
the iPhone with.
9