IQlife Touch Wall Switch User manual

Installation Manual
Copyright © 2019 Aitechnic Technology Solutions. All right reserved.

Please read instructions before Installation
- Page 1 -
An electrical licence is required before
any electrical wiring work as per laws
Whats Included
1. Touch Switch
2. Screws for fitting
Whats Needed
Download the IQlife App from IOS or Android Store
Recommended : Android/tablet with OS 4.4 or higher
and iphone/ipad with ios 9.0 or higher

Step 1 :
Launch the app.
Click on Register
Step 2 : Select the country code and
either enter yourmobile number or
email account
Step 3 : Click on Obtain verfication code and authenticate
- Page 2 -
Note: This will be used as unique identifier for your account
and same should be used for your Alexa and Google Account

- Page 3 -
Step 4 : Click on add sign ‘+’ Step 5 : Click on Wall Switch
Press and hold any switch for 5 seconds then all the button's
backlight starts blinking fast, then release you finger
Step 4 : Turning the Switch to Pairing Mode
Pairing mode remains for 3 minutes and exits if operation fails
Exit Pairing mode
Step 5 : Click on + sign Step 6 : Select Wall Switch

- Page 4 -
Step 5 : Confirm Indicator Step 6 : Confirm WiFi details
Step 6 : Rename & Click Complete

- Page 5 -
Connect wire to the correct terminal and tighten the screws.
2. Wiring Instruction:
NEUTRAL wire connection is MANDATORY.
Neutral
Neutral
Live
OUTIN
L4
OUT
L3
OUT
L2
OUT
L1LN
（1） （2）
N L L1 L2 L3 L4
1. Open the front cover by a small flat screwdriver
Twist to remove:
Hardware Installation:
L（LIVE）
N（NEUTRAL）
E（Earth）
PVC Insulation

Limited Warranty
This warranty covers defects in manufacturing that arise from the correct
use of the device. It is limited to defects in materials or workmanship and
does not cover damage caused by abuse, misuse, unauthorised
modification, power surge damage or extreme heat or cold or corrosive
environments. The warranty also does not cover the normal wear and tear
on covers, cases, housings, connectors and accessories. The warranty does
not apply to any product with missing, altered or defaced serial numbers.
Your products come with a 3 years manufacturer’s warrantly as standard.
3. Fix screws
Note: If you had done touch testing without glass panel cover, please turn
off main power after testing and clip on glass panel cover to switch case
,and turn on main power supply.
lock here first
Push until click
For the Latest version of user manual, Please visit
http://aiqlife.com/Manual
- Page 6 -