iREZ K2 User manual

Contents1
Contents
1. This Quick Install Guide
2. K2 USB 2.0 Video Camera
3. CD with Drivers and Application Software
1
Install drivers from the CD2
Equipment Assembly and Set-up3
Basic Overview
1 focus ring
2 glass lens; 54º field of vision
3 LED power indicator
4 universal camera mount
5 patented removable claw*
6 lens cover
7 micro 3.6mm USB 2.0 cable
*US Patent #5,855,343
Minimum System Requirements
•Intel Pentium lll 500MHz processor or faster
•Microsoft Windows XP SP1 or 2000 SP3*
•128MB RAM (256MB Recommended)
•CD-ROM Drive or Internet access
•One Available USB 2.0 Port
•160MB Free Hard Disk Space
(260MB Recommended)
* If lower service packs are installed, your resolution will
be limited to 160 x 120.
1
2
3
4
57
6
K2 USB 2.0 K2 USB 2.0 Quick Install Guide
Thank you for purchasing the K2 USB 2.0 Video Camera
Install the latest drivers from our website,
http://www.irez.com/
Closing/Opening the K2
The K2 was designed to fold down for transport and
for protection for the lens. [See fig A]
K2 Mounting Options
The K2 was designed to hang from the top of your
laptop or flatscreen monitor or be attached to the
optional base and armature assembly. (See fig B)
Specifications
Image Sensor Size: 1/3"; 0.35 Megapixels
Resolution: Up to 640x480
Focus Distance: 5cm to ∞
Field of View: 54º
Colors: Up to 32 bits RGB
Frame Rate: Up to 30 fps at 640x480 (VGA)
USB Cable Length: 2 meters
Manual Focus
Auto White Balance
Auto Exposure Control
LED Indicator
90 Day Limited Warranty
fig A
fig B
Installation for Windows XP
1. Insert the included CD into your drive. A welcome screen should popup, if it
 does not, you’ll need to run setup.exe from your CD-drive. You can now follow
 the on-screen instructions.
2. Once the installer is finished, remove the CD from your drive.
3. You can now plug your camera into a USB 2.0 port.

Please visit the GlobalMedia Web site, www.globalmedia.com to view the iREZ Professional Video Communication Series
Installation for Windows 2000
1. Insert the included CD into your drive. A welcome screen should popup, if it
 does not, you’ll need to run setup.exe from your CD-drive. You can now follow
 the on-screen instructions.
2. Once the installer is finished, remove the CD from your drive.
3. You can now plug your camera into a USB 2.0 port.
4. The "Found New Hardware Wizard" should popup. Click "Next". (fig A)
5. If a "Digital Signature not found" window comes up, click on
 "Continue Anyway". (fig B)
6. When informed that the "Wizard has finished installing the software for K2"
 click "Finish". (figC)
7. If another New Hardware Wizard window appears, follow steps 4 through
 6 again.
8. Right Click on "My Computer". Click Manage.
9. On the left hand side of the Computer Management console (fig D), click on
 Device Manager (D1).
10.On the right side of the Computer Managment console, there is an
 alphabetical list of devices on your computer (figD). double-click on the
 "Sound, video and game controllers" line item (D2).
11.Right click on "K2 Audio" or "USB Audio" and choose Disable.
12.Close all open windows.
 You're all set to use your K2 camera!
fig B
fig A
fig C
fig D
D1
D2