English English
Tip: to hear the text read out loud after scanning, select the Say out loud option
on the ribbon.
Note:
By default, IRISPenTM adds a space after each scan, and adds new scans on the same line
in your application until the line is full.
To start a scan on a new line:
•Click and slide the IRISPenTM over a line of text.
•At the end of the line, click again with the IRISPenTM.
The cursor now moves to the line below. To modify the default settings, see the topic
Configuration.
5.1.1 Scanning Vertical Text
IRISPenTM Executive 7 can scan vertical text, to scan Japanese text for instance.
To scan vertical Japanese text:
1. Select Japanese from the language list.
2. Then select Vertical on the ribbon.
5.1.2 Scanning Tables
IRISPenTM Executive 7 can scan tables to spreadsheet applications such as Excel:
1. Select Table mode > ON.
2. Open a spreadsheet application and mouse click inside it.
3. Click and slide the IRISPenTM over a table line.
The content is filled in in different cells in the application.
5.1.3 Scanning Numbers
When your documents contain numbers only, it recommended activating the numbers
only feature:
1. Select Scan text as >123... on the tab Scan to doc / app.
5.1.4 Scanning Single Words
To scan single words, instead of full lines:
1. Select Text span > Single word.
2. Place the scanner well in front of each word to start the scanning, and also end
the scanning well after each word.
6
