Ironside IRL892 User manual

The professionals' choice
IRL892 - 152300
Self levelling laser IRL892
Selbstnivellierender Laser IRL892
laser autonivelant IRL892
Zelfnivellerende laser IRL892
Självnivellerande laserpass IRL892
Itsevaaittuva laser IRL892
láser autonivelante IRL892

2
Thank you for purchasing the IRL892.
This manual will show how to get the most out of your laser tool.
Applicaons
The IRL892 is innovavely designed for a very broad range of
professional and DIY jobs, including:
• Aligning les, cabinets, borders, moldings and trims
• Door and window installaon
• All types of DIY jobs, including hanging shelves,
pictures and more
NOTE
Keep this user manual in a safe place for
future reference.
IRL892 Ironside self leveling laser

3
• Features 4
• Safety instructions 5-6
• Battery installation 7
• Overview 8
• Operating instructions 9-11
• Maintenance 12
• Field calibration test 13-15
• Specifications 16
• Warranty 17
Contents

4
FEATURES
Features
• Intersecng horizontal and vercal lines at 90°
• 165’ (50m) outdoor range with detector
• “Tilt” mode for angular layout/marking
• Strong folding legs for angle mounng and height adjustment
• Self-leveling mechanism
• Visual and audible “out of level” warning
• 1/4" tripod adaptor
• Shock resistant rubber casing
• Compact size – ts in your toolbox

5
SAFETY INSTRUCTIONS
WARNING
The product is a class II laser.
Laser radiation: Serious eye injury could be caused
by looking directly into the beam or by projecting
the beam into the eyes of others
• The use of protective eyewear is recommended.
• Always position the laser beam so that it does not
cause anyone to directly stare into it.
• Do not operate the laser level near children or let
children operate the laser level.
• Do not look into a laser beam using magnifying optcal
equipment, such as binoculars or a telescope, as this
will increase the level of eye injury.
Safety instrucons

6
• Do not remove or deface warning labels on the laser level.
• Do not take the unit apart.
• Do not drop the unit.
• Do not use solvents to clean the laser unit.
• Do not use in temperatures below 14°F or above 113°F
(-10°C to 45°C)
• Do not use in combusble environments such as in the
presence of ammable liquids, gases or dust.
• When not in use, turn o the power, remove the baeries,
engage the lock-protect mechanism and place the laser in
the carrying pouch.
• Make sure the lock-protect mechanism is engaged before
transporng the laser.

7
1. Press down on the latch and remove the baery cover.
2. Insert 3 new AA baeries of the same brand according to
the polarity diagram on the inside of the baery compartment.
3. Replace the baery cover.
Baery installaon

8
1. On/O switch
2. Metal legs
3. Keypad
a. Manual Mode d. Manual Mode indicator
b. Beam Selector e. Laser beam indicator
c. Pulse Mode f. Pulse (detector) mode
4. Laser projector window
5. Baery cover
6. ¼” tripod adapter
Overview

9
Working in Automac mode (self-leveling):
The laser level can project a horizontal line, vercal line or both
simultaneously.
1. Remove the laser from the case and place it on a at, vibraon free
surface or tripod.
2. Turn ON/OFF switch to ON.
The laser level will generate the crossed horizontal and vercal lines
and the laser beam indicator will light.
3. Choose the beams you want to use by pushing the Beam Selector.
4. Before moving the laser level be sure to switch to laser to the OFF
posion which engages the lock protect mechanism.
Operang instrucons

10
Working in Manual mode:
In manual mode the 892’s self-leveling mechanism is disengaged
so that you can set the laser lines at any slope you require.
1. Remove the laser from the case and place it on a at,
vibraon free surface or tripod.
2. Press manual mode buon. Laser projects crossed lines
without self-leveling.
3. Choose the beams you want to use by pushing the
Beam Selector.
4. Now you can lt the laser as needed to mark the desired
slope. Use the folding legs to adjust the angle and the
height.
5. To turn the laser o, press the Manual buon again.
6. Before moving the laser level be sure to switch to
laser to the OFF posion which engages the lock protect
mechanism.

11
Working in Pulse mode with a detector:
You can use the IRL892 outdoors using the pulse mode with a
detector. This allows you to use the laser for extended ranges or
in poorly lighted condions.
To acvate the Pulse Mode press the P buon.

12
• Clean the aperture lens and the body of the laser level
using a clean so cloth only. Do not use solvents.
• If the laser level is exposed to water, dry the laser level
before returning it to the carrying case.
• Change the baeries when the laser beams begin to dim.
• Remove the baeries if the laser level will be unused for
a long period of me.
• Regularly check the laser beams accuracy.
Maintenance

13
FIELD CALIBRATION TEST
The laser level leaves the factory fully calibrated. Ironside
recommends that he level be check regularly and aer the unit
has been dropped or mishandled.
Horizontal Calibraon Test
1. Place the laser on a at, vibraon free surface as near as
possible to a long wall.
2. Switch the laser ON and press the Beam Selector buon unl
the horizontal beam is projected.
3. Make two marks on the wall at the laser line – one close to
the laser and one as far away as possible.
4. Move the laser unit as close to the far away mark as
possible and repeat steps 1-4.
5. Measure the dierence between the laser line and the 2
previous marks on the wall.
If the laser is in line with the marks it is calibrated.
Field calibraon test

14
Vercal Calibraon Test
1. Hang a plumb line from a high point on a wall.
2. Place the laser on a at, vibraon free surface about 3
(1m) from the wall.
3. Press the Beam Selector buon unl the vercal beam is
projected.
4. Adjust the laser so that it touches the boom of the plumb
line.
If the laser line is touching the plumb line at the top the
laser is calibrated.

15

16
Laser beams output
paern
Vercal, horizontal and horizontal +
vercal
Laser range • Indoor - 100 (30m)
• Outdoor with detector 165 (50m)
Accuracy ±0.0002in/in (0.2mm/m)
Beam angle 120° ±5°
Self-leveling range ±5°
Laser line width 0.10” ±0.02” at 20’ (2mm ±0.5mm/5m)
Wavelength 635 ±5nm - Laser Class II
Power supply 3 AA baeries ( not included)
Baery life 20 hours of connuous operaon
Operang temp 14°F - 131°F (-10° C - 45° C)
Storage temp -4°F - 131°F (-20° C - 55° C)
Water & dust proof IP54
Dimensions 3.9” x 3.2” x 4.1” (10cm x 8.2cm x
10.4cm)
Weight including
baeries
1.37lbs ±0.3oz (620gr±10gr)
Specicaons

17
This product is covered by a two-year limited warranty against
defects in materials and workmanship. It does no cover products
that are used improperly, altered or repaired.
In the event of a problem with the laser level you have purchased,
please return the product to the place of purchase with the proof
of purchase.
Model IRL892
Serial number scker is posioned inside the baery
compartment.
Warranty

18
Vielen Dank für Ihr Vertrauen und dafür, dass Sie sich für einen
IRL892 entschieden haben.
In dieser Bedienungsanleitung erfahren Sie, wie sie das Beste aus
Ihrem Laser herausholen können.
Anwendungen
Der IRL892 ist mit seinem innovavem Design für eine breite
Palee von Anwendungen im Pro- sowie im Heimwerkerbereich
ausgelegt, u.a.:
• Verlegen von Fliesen, Montage von Schränken, Rahmen, Leisten
und Zierleisten
• Montage von Türen und Fenstern
• Alle Heimwerkertägkeiten, wie z.B. die Montage von Regalen,
das Auängen von Bildern, etc.
IRL892 Ironside selbstnivellierender
Laser
HINWEIS
Bewahren Sie die Bedienungsanleitung
sorgfältig für späteres Nachschlagen auf.

19
• Funktionen 20
• Sicherheitsanweisungen 21-22
• Einlegen der Batterie 23
• Übersicht 24
• Bedienungsanleitung 25-27
• Wartung 28
• Test Feldkalibrierung 29-31
• Technische Daten 32
• Garantie 33
Inhalt

20
FEATURES
Funkonen
• Kreuzlinien-, Horizontal und Verkallinienmodus bei 90°
• 50m (165’) Außen-Arbeitsbereich mit Detektor
• "Kippstellung" für das Ausmessen/Markieren von Winkelmaßen
• Höheneinstellbare, robuste, Klappfüße für das Aufstellen in Ecken
• Automasche Nivellierung
• Akussche und visuelle Warnung, wenn das Instrument "nicht
nivelliert" ist
• 1/4" Stavadapter
• Schlagfestes Gummigehäuse
• Kompakte Ausführung - passt in Ihren Werkzeugkasten