iSense BabySense HD S2 User manual

Wireless Digital Video Baby Monitor
atch, Listen and Talk to Your Baby
Models: HD S2 - 1 Camera
HD S2 - 2 Cameras
or any product related question please contact us at
[email protected]
ww.babysensemonitors.com
HD S2
Video Baby Monitor
isense Ltd. 27 Shaked St.
evel Modi'in Industrial Park,
319900 ISRAEL
User Manual
By

Follow these safety precautions to prevent fire, injury or damage to the product.
Read and keep instructions: It is very important that you read all the safety and operating
instructions before the Babysense video monitor is operated.
Please retain your purchase receipt as you will need to produce it if warranty service is required.
1. Warnings and Safety Instructions
WARNINGS:
STRANGULATION HAZARD: Children can become entangled in cords. Make sure the Baby unit, Parent
unit and mains adaptor cables are kept out of reach of your baby and other young children at all times,
at least 6 feet away.
CHOKING HAZARD: This product contains small parts which may cause chocking. Exercise care when
unpacking and assembling the product and keep the small parts away from children.
RISK OF SUFFOCATION: Keep all packaging materials and protective foils out of reach of children.
DANGER FROM POWER CORDS: To avoid possible danger from power cords, the cords should be secured
and never be hung on or near the crib. Never place the Baby unit or Parent unit inside your baby's crib,
bed or playpen.
DO NOT HANDLE ROUGHLY, DROP OR THROW: Babysense video monitor is a high-quality electronic
device which must be handled with care.
This product is designed for INDOOR USE ONLY.
WATER AND MOISTURE: The product should not be exposed to rain, moisture, or splashing. Never use or
place the product in or near moisture or water.
THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION: Your video monitor is designed to
be an aid and should not be used as a substitute for responsible and proper adult supervision of a child.
POWER SOURCE: This product should only be used with the AC power adapters supplied by the
manufacturer, as included in this package.
VENTILATION: This product should not be used on a bed, sofa, rug or similar surface that may block the
ventilation or speaker openings, or be placed in an enclosed area, such as a bookcase or drawer that

1.2 Safety Instructions for AC Power Adapter
may impede air flow. Never cover the product with clothes, towels, blankets or any other item.
THIS PRODUCT IS NOT A TOY: It should be kept out of children's reach.
KEEP AWAY FROM SOURCES OF HEAT: This unit should not be exposed to direct heat sources such as a
candle, stove, radiator, heat register or other appliance that emit heat. The unit should not be left in
direct sunlight.
BATTERY: Before you use the product, we recommend you fully charge the battery of the Parent Unit, so
that it continues to work if you disconnect it from the power supply to carry it to another location.
INSTALLATION LOCATION: The installation location plays an important role in ensuring proper operation.
Therefore, maintain a distance of at least 5 feet from other electronic equipment, such as microwave
ovens or Wi−Fi routers, otherwise they could cause interference. If this occurs, move the baby and
parent units to another location.
RANGE: Range of all baby monitors is always measured in an open space. The actual range may be
shortened due to environmental obstacles (such as concrete walls).
DAMAGE REQUIRING SERVICE: This product should be serviced by qualified personnel only.
DO NOT TRY TO OPEN AND REPAIR THE PRODUCT: If you have any problems with the product, please
contact the authorized distributor.
In case of unusual noises or smells originating from the device, immediately disconnect the product
from the power outlet and contact authorized distributor.
If the product becomes dirty, use a lightly damp soft cloth to wipe surfaces, taking care to not allow
water into any openings.
IMPORTANT: Babysense Video Monitor is designed only for hearing the baby’s voice and seeing the images
of the baby. This product is not a medical device and should not be used as a substitute for responsible
adult supervision. It is important that you regularly check on your baby personally.
The adapter should not be exposed to direct heat sources such as a candle, stove, radiator, heat register
or other appliance that emit heat.
During continual use, the power adapters may become warm to the touch. This is normal and should not
be a cause of concern.
Examine intactness of the power cord and its plug.
The adapter must be handled with care: Do not handle roughly, drop or throw.
When removing the power adapter from the wall outlet, hold and pull from the receptacle.
Do not pull on the cable itself or bend the cable as that will put additional stress on the cable and could
lead to damages.
Do not touch the power adapter with wet hands or allow liquids to spill on it.
Make sure the mains adaptor cables are kept out of reach of your baby and other young children at all times.
To avoid possible danger from power cords, the cords should be secured and never be hung on or near the crib.
Do not replace the plugs or cable on your power adapter. This product should only be used with the AC

1.3 Safety Instructions for Li-ion battery (Non removable pre-installed battery)
1.4 Information on disposal of product
Do not replace the power cord with non-original substitutes. Improper connection may cause electrocution.
Do not place the AC adaptor cable in a high wear and tear location. Never use a frayed or compromised cord.
Intended for indoor use only.
power adapters supplied by the manufacturer, as included in this package.
Never cut, damage or bend the power cord.
Do not put any objects on top of the power cord, which could cause overheating, damage, combustion
and electrocution.
Do not leave the power adapter connected to the wall outlet when it is not plugged into the Baby or Parent unit.
WARNING:
Do not attempt to repair or adjust any of the electrical or mechanical functions of the unit.
Do not dismantle, cut, open, crush, bend, puncture, or shred cells or batteries.
If a battery leaks, do not let the battery liquid touch skin or eyes. If this happens, immediately flush the
affected areas with water, and seek medical assistance.
The battery should not be exposed to direct sunlight or heat sources such as a candle, stove, radiator, heat
register or other appliance that emit heat.
Do not modify, remanufacture, attempt to insert foreign objects into the battery, or immerse or expose it to
water or other liquids. Batteries may explode if damaged.
Use only the battery pack supplied with the product or the same type, sold by the manufacturer or its
authorized distributors. Improper use or use of unapproved batteries may present a risk of fire, explosion, or
other hazards, and may invalidate the warranty.
If you believe the battery is damaged, remove product from the charger and stop using the product.
Never use a damaged battery.
Always dispose of your product (with the non removable pre-installed battery) at the end of their life in an
environmentally responsible way and in accordance with your local waste disposal requirements.
All cardboard and paper packaging materials should be recycled in accordance with your local council
waste regulations.
Thank you for choosing Babysense Video Monitor from Hisense Ltd.

2. Overview
2.1 Pack Contents
2.2 Parent Unit Overview
Parent Unit x 1
Baby Unit (Camera) x 1 (x2 in HD S2 - 2 Camera model)
AC Power Adapter x 2 (x3 in HD S2 - 2 Camera model)
Set for wall mounting x 1 (x2 in HD-S2 2 camera model)
User Manual x 1
Power ON/OFF/SLEEP Button
Charging LED
Power LED
Volume Level LEDs
Volume Up/Down Buttons
MENU/EXIT Button
Night Light
Navigation Keys
OK/ZOOM Button
Talk Back Button
Camera Switch Button
Microphone
Antenna
Speaker
Stand
DC Jack
Reset Button (Under the Stand)

2.3 Baby Unit Overview
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
Infrared LEDs
Lens
Light Sensor (Night Vision)
Power LED
Night Light
Microphone
Temperature Sensor
ON/OFF Switch
DC Jack
Speaker
PAIR Button
Lullaby
VOX
Timer
Time Format
Brightness
Alert Volume
Frequency Seng
Customers Support
Night Light Icon
Temp
Temp C/F
Camera
Split Screen
Seng
20
18
21
22
24
25
28
27
26
19
23

3. Getting Started
3.1 Powering the Baby Unit (Camera)
3.2 Powering the Parent Unit
3.3 Charging the Parent Unit
Connect the Camera Power Adapter to the DC-Jack (26) on the bottom of the Baby Unit.
Plug the AC power adapter into the wall outlet.
Ensure the ON/OFF switch (25) is in the ON position.
The unit will power on automatically and the green power LED (3) will light up.
Use the ON/OFF switch (25) to turn the Baby Unit off.
NOTE: Only use the AC power adapter included in this package.
Connect the Parent Unit Power Adapter to the DC-Jack (16) on the right side of the Parent Unit.
Plug the AC power adapter into the wall outlet.
Press and hold the Power button (1) on the top left side of the Parent Unit for 2 seconds to turn the unit on.
Once the Parent Unit is turned on, the green power LED (3) will light up and “Babysense Video” logo will
display on the LCD.
Press and hold the Power button (1) on the top left side of the Parent Unit for 5 seconds to turn the unit off.
NOTE: Only use the AC power adapter included in this package.
NOTE: The parent unit is supplied with a built-in rechargeable Li-ion battery (3.7V 4000mAh).
We recommend whenever possible, to keep the Parent Unit plugged in to keep the battery charged.
Connect the power adapter to the DC-Jack (16) on the right side of the Parent Unit.
Plug the AC power adapter into the wall outlet.
Charging LED (2) on the Parent Unit will light up in RED to indicate charging.
When the unit is turned on, the battery charging icon (changing bars) will appear at the top right corner of
the LCD screen.
Full battery indicator (4 fixed bars) will appear at the top right corner of the LCD screen, indicating the
battery is fully charged. The charging LED (2) will turn green once the battery is fully charged.
NOTE: Before the first use or after a long product storage, it is recommended to fully charge the Parent Unit prior
to operating the monitor. It takes approximately 8 hours to fully charge the battery.
NOTE: The monitor can be operated normally during the charging process.
NOTE: Low Battery Warning - The battery icon turns red on the LCD screen to indicate that the battery is low.
The warning is accompanied with an acoustic beep sound, indicating that the battery needs to be recharged.
** Alert Volume can be adjusted in the parent unit menu, see details in Section "Warning Alert Volume Setting".

08
3.4 Set Up
Once both the Baby and Parent Units are switched on, the display on the Parent Unit will show the video
captured by the Baby Unit(s).
Baby Unit(s) are paired to the Parent Unit when supplied. There is no need to pair the units again unless the
Baby Unit loses its link with the Parent Unit. To renew the pairing of your units or pair a new/additional Baby
Unit, follow the procedure described in the Section "Pairing the Baby Unit (Camera) with the Parent Unit".
The Baby Unit should be placed at least 6 feet away from the baby's crib on a flat surface. Alternatively, it
can be wall mounted.
Never place the Baby Unit inside the crib, bed or playpen.
Make sure the unit and cords are out of reach of the baby and other young children.
To avoid a strangulation hazard, the power cords should be secured and never hung on the crib or near the
baby.
Place the baby monitor in a place where the air can circulate freely and avoid blocking the ventilation and
speaker openings.
Aim the camera(s) to best optimize the viewing area: Select a location for the camera that provides a clear
view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light
source or direct sunlight. Avoid installing the camera where there are thick walls or obstructions between the
camera and the monitor.
To use your Parent Unit and Baby Unit together, you must be able to establish a radio link between them; the
range may be affected by environmental conditions/obstacles (See more details in Troubleshooting Section 6 -
“Interference or poor reception”)
Press to access the menu, choose and press
Press the lullaby you want to play.
Navigate with to select the desired duration and music volume.
In order to stop the lullaby playback, select
Press to exit the menu.
1.
2.
3.
4.
5.
You can soothe your baby to sleep by playing 5 pre-programmed lullabies from the Baby Unit.
The monitor also features White Noise, which is an effective way to soothe a crying infant and lull your
newborn to sleep. The Lullaby and White Noise features are controlled remotely from the Parent Unit.
4.1 Lullaby & White Noise Setting
4. Operating the Monitor

09
4.2 VOX Mode
NOTE: Once the lullaby function is turned on, the lullaby icon will be displayed on top of the LCD screen.
When using the VOX function, the sound and video transmission will stop (standby mode) if the Baby Unit
does not register any sound within 30 seconds.
While in standby mode, the LCD screen turns off. Once the Baby Unit registers a sound, louder than the set
sensitivity level, it will automatically start transmitting the signal (sound and video) to the Parent Unit
and the LCD screen will turn on.
NOTE: VOX default setting is OFF.
High
White
Noise
White
Noise
The lullaby default setting is OFF.
When selecting the loop mode only the 5 melodies are played; the White Noise is excluded.
When VOX Mode is active, sound detected from either camera will wake the display and show the
respective camera.

10
VOX - LOW - Low sensitivity level - higher sound level is required to reactivate the transmission
VOX – MEDIUM - Medium sensitivity level - medium sound level is required to reactivate the transmission
VOX - HIGH - High sensitivity level - low sound level is required to reactivate the transmission
VOX - OFF - Constant transmission – no standby mode.
NOTE: To resume the video and audio signal manually on your parent unit when VOX function is on, briefly
press any key on your Parent Unit.
OFF
Low
Medium
High
Low sensivity level
-Once in standby mode,
a loud sound registered
by the camera is required to
automacally acvate
the audio and video feed.
Press to access the menu, choose and press
1.
Navigate with to select the desire vox level.
2.
4.3 Split Screen Setting
You can see images from two Baby Units side by side on your Parent Unit by enabling the SPLIT SCREEN setting.
NOTE: This function is only available when two or more cameras are paired.
Press to access the menu, choose and press
Navigate with to select the desired option.
Press to exit the menu.
1.
2.
3.
To change the VOX Level please follow the instructions below:

Press to access the menu, choose and press
Navigate with to select the camera you want to pair.
Press to exit the menu.
11
4.4 Pairing the Baby Unit (Camera) with the Parent Unit
Two Camera Split Screen View
The Baby Unit is paired to the Parent Unit when supplied. There is no need to pair the units again unless the
Baby Unit loses its link with the Parent Unit. To renew the pairing of your units or pair a new/additional Baby
Unit, follow the procedure below. If unsuccessful, please repeat the pairing process:
NOTE: Before you begin pairing, make sure to have the Baby and Parent Units side by side and turned on.
1.
2.
3.
PAIR
1
2
4
DELETE
49
Press and hold the pair buon
at the back of the camera
3

Press to access the menu, choose and press
Navigate with to select the camera you want to delete.
Press to exit the menu.
1112
4.5 Deleting the Baby Unit (Camera)
1.
2.
3.
PAIR
1
2
3
4
DELETE
Delete
Cancel
Press to access the menu, choose and press
Press °F / °C and press
Navigate with to select the desired scale.
Press to exit the menu.
4.6 Temperature Scale Setting
The temperature reading from the temperature sensor (24) at the back of the Baby Unit will be displayed on
the top of the screen. To switch between °F (Fahrenheit) and °C (Celsius) follow the below instructions:
1.
2.
3.
4.

Press to access the menu, choose and press
Press and press
Navigate with to select the desired option.
Press to exit the menu.
1113
4.7 Temperature Alert Setting
ALERT
Press OK buon
to confirm
NOTE: The monitor features a built-in automatic temperature alert. The monitor will alert (visual
indication) when the temperature in baby’s room is too high (90°F and higher) or too low (55°F and
lower).
NOTE: Make sure the temperature sensor is not positioned too close to the camera body as it may
affect the correct temperature reading. It is recommended to stretch out the sensor, so it is as far away
from the camera body as possible. Also, it is recommended to place the camera in an area where there
is good air circulation and not in a closed cornered area where the temperature tends to be higher.
This function is to alert if the temperature in baby’s room is too low or too high.
Default setting is: <15 °C/59 °F and >31 °C/89 °F.
To change the temperature alert levels, please follow the below instructions:
1.
2.
3.
4.

Press to access the menu, choose and press
Press and press
Navigate with to select the desired format, and set the time.
Press to exit the menu.
111314
4.8 Time and Time Format Setting
This function allows you to choose the desired time format: 12H or 24H and set your time.
1.
2.
3.
4.
ALERT
Low Temp
Alert Seng
Low Temp Alert will acvate
when temperature drops
below your seng
15°C
High Temp
Alert Seng
ALERT
12H 22:07
24H
-Time Format-

111314 1115
4.10 Timer Setting
4.9 Brightness Adjustment
Press to access the menu, choose and press
Press and press
Navigate with to select the desired brightness.
Press to exit the menu.
1.
2.
3.
4.
ALERT
Screen Brightness
-High-
-Low-
Press to access the menu, choose and press
Press and press
Navigate with to select the desired time.
Press to exit the menu.
1.
2.
3.
4.

1113
14
1116
14
ALERT
- Timer -
Press OK key
to confirm
1h
2h
3h
4h
6h
4.11 Warning Alert Volume Setting
This setting controls the volume of an audio “beep” sound alerting when the Parent Unit is low
on battery, high/low temp alert or out of range (no connection to Baby Unit). You can set a
lower volume level during the night and higher level during the day.
ALERT - Alert Volume-
Set the desired Alert
Volume for the following
noficaons:
low baery,
waing for connecon,
low/high temperature.
Low
Medium
High
Press to access the menu, choose and press
Press and press
Navigate with to select the desired alert volume.
Press to exit the menu.
1.
2.
3.
4.

11131116 11131117
14
4.12 Frequency Setting
This function allows you to choose desired frequency format 60Hz (for US) or 50Hz (for EU)
NOTE: Selecting the OFF option will mute all alerts. In case of low battery, high/low temp or out of
range, there will be no acoustic notification heard.
Press to access the menu, choose and press
Press and press
Navigate with to select the desired frequency.
Press to exit the menu.
1.
2.
3.
4.
ALERT
Frequency seng
Suggeson: Use 60Hz in USA.
Screen may flicker in some
lighng environments.
change the frequency
to lower the flickering effect.
50Hz
60Hz
Use 50Hz in EU.
4.13 Volume Adjustments
• Press the VOLUME UP/DOWN buttons (5) to increase/decrease the sound coming out of the Parent Unit.
NOTE: In normal use, it is recommended to set the volume at level 3 and below. Higher volume levels are
intended for loud/noisy environments.
NOTE: If the volume on the Parent Unit is set too high and the Baby and Parent Units are close to each
other, a high-pitched noise may be heard (also known as feedback or static noise).

11131116 11131118
• Press and hold the CAMERA SWITCH button (11) to activate the automatic SCAN mode. A SCAN MODE
ON message will appear on the screen and a loop sign will appear next to the camera number on the
top of the LCD screen.
• Press the CAMERA SWITCH button (11) to deactivate the Scan mode
14
4.14 Night Light
This monitor features a night light integrated into the Baby Unit (22), allowing you to remotely activate a
comforting glow to baby’s room. There are 3 light levels (from low to high) to choose from.
• Press the button on your Parent Unit to choose the desired light intensity.
NOTE: The Night Light status icon will be displayed on top of the LCD screen.
NOTE: Night Light feature can also be activated manually on the Baby Unit. Briefly press the PAIR button
(28) on the bottom of the Baby Unit to cycle between the intensity levels.
4.15 Zoom Mode
This baby monitor features two-zoom levels: x2 and x4.
4.16 Switching between the paired Baby Units (Cameras)
NOTE: This function is only available when two or more cameras are paired.
• To switch between paired cameras – briefly press the CAMERA SWITCH button (11) on your Parent Unit.
4.17 Scan Mode - Automatic switching between the paired Baby Units
You can set the SCAN (loop) mode and each paired Baby Unit will be displayed on the screen for 15
seconds and then the screen will automatically change to the next paired Baby Unit.
NOTE: This function is not available when SPLIT SCREEN mode is ON.
1. Press the button once to activate “x2” zoom option.
2. Press the button twice to activate “x4” zoom option.
3. Press the button again to exit zoom option.

14
4.18 Talk to Baby
NOTE: While the “Talk to Baby” function is in use, there is no possibility to hear the sounds from the Baby
Unit. Releasing the talk button allows one to hear the sounds from the baby's room again.
All of the following maintenance procedures should only be performed when Baby and Parent Units are
unplugged and off.
• Clean the surfaces of the Baby and Parent Units with a soft, fluff-free cloth.
• Never use cleaning agents or solvents.
• If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care not to allow water into
any openings.
11131116 11131118 11131119
• Press and hold the on your Parent Unit to talk to your baby or partner in the baby’s room via Baby Unit.
• Release the button when you are finished talking.
5. Maintenance

14
6. Troubleshooting
161820
• The power adapters may not be properly connected.
• Ensure that the Baby and Parent Units are ON.
• Adjust the monitor antenna to vertical position.
• Make sure the Baby and Parent Units are not far away from each other.
• Baby and Parent Units may not be properly paired. Follow PAIRING instructions.
No reception on
the Parent Unit
Possible cause/solutionProblem
Interference or
poor reception
• Move the Baby Unit closer to Parent unit.
•
Use of other 2.4GHz products, such as wireless networks (Wi-Fi routers),
Bluetooth systems, or microwave ovens, may cause interference with this product,
so keep the baby monitor at least 5ft (1.5m) away from these types of products
or turn them off if they appear to be causing interference.
• The Baby or Parent Units may be too close to metal objects.
• The battery power may be too low.
• Restart the Baby Unit (unplug the power adapter from the wall outlet,
wait for approx. 5 seconds and plug it back into the wall outlet).
• Reset the Parent Unit by pressing the RESET button (17), located at the back of the
Parent Unit, under the stand.
Image frozen on
the Parent Unit
• Volume setting on the Parent Unit may be too low. Increase the volume.
• Battery power may be too low. Recharge the battery.
Cannot hear the
baby sounds on
the Parent Unit
• In a quiet environment, surrounding the Parent Unit, decrease the volume on your
Parent Unit to level 3 and below.
• In a loud environment, surrounding the Parent Unit, increase the volume to the
maximum level.
Background
noises
• Automatic Night vision mode may be on. Increase lighting around the camera to
force monitor out of night vision mode.
Picture is black
and white
A high-pitched
sound is heard from
the units (feedback,
static)
• The Baby Unit and Parent Unit may be too close to each other. Move them
further apart.
• The volume on the Parent Unit may be set too high. Lower the volume.