Ista FUMONIC 3 RADIO NET User manual
The benefits of fumonic 3
smoke detector –in short
1. Monitoring to increase safety
The smoke detector is monitored. If the battery does not
work, the smoke detector will be removed. If the smoke
detector is subject to vandalism it is registered by the
monitoring and the error will be repaired by ista.
2. Regular tests increases the safety
The smoke detector will also be tested regularly. In this
way ista ensures that you have a maintained and well-
functioning smoke detector. Among other things the
smoke detector is tested if it has been subject to
vandalism (attempts to dismount/manipulate it).
Manual tests can also be made.
3. LED light with better orientation
In case of an alarm the smoke detector will show a
LED light, which penetrates the smoke and helps you
orientate –even in a dark and smoky room.
Important information!
Don’t remove or dismount the smoke detector!
Do not paint on the smoke detector!
Do not cover up the smoke detector!
In order to shut off the alarm:
press the button on the centre
of the smoke detector!
!
Contact ista if you experience
errors on your smoke detector.
Contact ista if you experience
errors on your smoke detector.
Safety for you and your loved ones
Congratulations! Your new fumonic 3 smoke detector
increases the safety for you, your dear ones, and
your neighbours significantly.
Fumonic 3 is the newest and most advanced smoke
detector on the market. All the important functions
of the smoke detector are monitored by ista. And on
a regular basis ista will test the smoke detector and
make sure that it works optimally.
With the fumonic 3 smoke detector in your
accommodation you achieve higher safety.
How to shut off alarms
Smoke detectors can be shut off by pressing the
centre area of the smoke detector. This stops the
alarm for approx. 10 min. and then it will
automatically go back to normal operation.
Get to know the signals
The smoke detector shows various signals, which
informs you if an alarm has been given. Get to know
the various signals, so you know what to do.
Normal
Signal
Meaning
What to do?
Red lamp flashes shortly
approx. every 45 sec.
The smoke
detector is in
operation.
Do nothing.
The alarm makes 1 low
beep approx. Every 45
sec.
The red lamp flashes
every 8 second.
The battery is
running low.
Contact ista or your
own janitor.
Press the centre area
of the smoke
detector to shut it
off.
The alarm makes 1 low
beep approx. Every 45
sec.
The red and the white
lamp flashes every 8
second.
Technical error.
Contact ista or your
own janitor.
Press the centre area
of the smoke
detector to shut it
off.
Test
Signal
Meaning
What to do?
The alarm makes 3
short, very high alarm
tones.
The red and the white
lamp flashes.
A test alarm has
been generated.
Do nothing. The
alarm works
perfectly. When the
test is over the
smoke detector will
be working
normally again.
Alarm
Signal
Meaning
What to do?
The alarm makes 3
short, very high alarm
tones, which are
repeated.
The white lamp will light
continuously.
The red lamp will flash 3
times per each alarm
sequence.
The alarm has
been activated
because of
serious smoke
formation.
Keep calm, make
sure you and your
family are safe and
call for help.
Read the advice in
case of fire.
The alarm is silent and
the red lamp will flash
quickly.
This is a pre-
alarm, caused
by the smoke of
ex cooking
odour or
cigarettes.
Do nothing.
However, be aware
of the cause to the
alarm.
Good advice in case of fire
In case of fire every second counts. Stay calm, get you
and your family out of the building and call for help.
1. Save yourself and other people from danger.
2. Yell “fire” so that you alarm other people and
they will manage to get out.
3. When you are out of the building –stay outside
the building. Do not enter any building on fire.
4. Call 112 for help and inform the following:
a. What has happened?
b. What phone number are you calling
from?
c. Where did this happen?
5. Stay on the scene until the fire brigade arrives,
so that you can inform if there are any missing
people in the building.
Other Ista Smoke Alarm manuals
