Your iSwegway Kart comes with
the following accessories:
4 x Screw M6*15
4 x Locknut M6 x4
1 x Wrench 10mm x1
1 x Hex Wrench 5mm x1
PUTTING IT TOGETHER
It’s easy to install your hoverboard to your iSwegway Kart. It shouldn’t take you more
than 15 minutes, and with our easy instructions, you’ll be racing around in no time!
To begin with, simply snap-on your telescopic rod, ensuring that it reaches the
100mm line. Once you have done this, lock the buckle to secure it.
Once you have done this, fold the belt (L900mm x W25mm) in half and
cross it into the metal hole.
INTRODUCING THE
Are you ready to experience your Swegway hoverboard like never before?
The iSwegway Kart is easy to attach to your board and allows you to use it as a GoKart.
Taking only 15 minutes to set up, you can attach it to any 6”, 8” or 10” Swegway.
INSTALLATION
Kart
