iTALK VoIP-1 User manual

Prepared for English 273
Instructor: Joe Benge
June 17, 2005
iTALK VoIP-1
User Manual
By
David Watson
Nathan Dyczkowski
Mathew Bennett
Khang Tran

iTALK VoIP-1 User Manual
Table of Contents
Introduction....................................................................1
Included with the System...............................................1
What Else You‟ll Need ..................................................1
Setting up the VoIP-1 System........................................2
Using the VoIP-1 System...............................................4
Summary of Commands.............................................4
Getting Your IP..........................................................4
Making a Regular Telephone Call .............................4
Making a VoIP Call by Entering an IP ......................5
Making a VoIP Call by Entering a Phone Number....5
Making a VoIP Call Using Speed Dial ......................6
Setting up the Address Book..........................................6
Accessing the Address Book......................................6
Storing Information in the Address Book..................7
Deleting Information in the Address Book................8
Contact Information.......................................................9
Warranty Information.....................................................9
© Copyright 2005
iTALK Inc.
All Rights Reserved

iTALK VoIP-1 User Manual
1
Introduction
The iTALK VoIP-1 system lets you call anyone in the
world over the internet using a telephone while still
allowing you to make and receive regular calls. It works
by using established VoIP (Voice over Internet
Protocol) technology to call another person who has a
similar VoIP system. All you need to do is connect the
VoIP-1 box to your regular touch tone telephone and an
internet connection and you will be making calls within
minutes.
Included with the System
VoIP-1 Device
Wall Mount Power Adapter
Black (2 m) Phone Cord
Blue (2 m) Ethernet Cable
User Manual
What Else You’ll Need
A regular touch tone telephone
An internet connection through a router or modem
Access to the web to configure the address book
stored in the VoIP-1 device

iTALK VoIP-1 User Manual
2
Setting up the VoIP-1 System
1. Remove the VoIP-1 device, wall mount power
adapter, phone cord, and Ethernet cable from the
packaging.
2. Connect one end of the blue Ethernet cable to your
available internet connection.
3. Insert the other end of the blue Ethernet cable into
the VoIP-1 device in the socket labeled “Ethernet”.
4. Disconnect your telephone cord from the phone
jack.
5. Connect one end of the black phone cord in the now
empty phone jack.
6. Insert the other end of the black phone cord into the
VoIP-1 device in the socket labeled “Phone In”.
7. Connect your telephone cord to the VoIP-1 device
in the socket labeled “Phone Out”.
8. Insert the circular power plug coming from the wall
mount power adapter into the VoIP-1 device in the
socket labeled “Power”.
9. Plug the wall mount power adapter into a 120V AC
outlet.
If everything is working correctly a red light on the
VoIP-1 device will come on indicating it has power.
A few moments later the green Ethernet link light
should come on indicating the device is linked to the
internet.
10. Pick up the telephone handset and confirm that you
hear a dial tone.

iTALK VoIP-1 User Manual
3
Figure 1. Front Side of the VoIP-1 Device
Figure 2. Back Side of the VoIP-1 Device

iTALK VoIP-1 User Manual
4
Using the VoIP-1 System
Summary of Commands
Command
Key Presses
Getting Your IP
*
Regular Telephone Call
Phone Number as Normal
VoIP by Entering an IP
#,#, then IP
VoIP by Phone Number
#, then Phone Number
VoIP by Speed Dial
#,*, then Speed Dial Code
Getting Your IP
1. Pick up the telephone handset.
2. Press the asterisk sign „*‟.
The phone will now play back a recording of your
IP.
Making a Regular Telephone Call
1. Pick up the telephone handset.
2. Enter the telephone number of the person you want
to call as normal.

iTALK VoIP-1 User Manual
5
Making a VoIP Call by Entering an IP
1. Pick up the telephone handset.
2. Press the pound sign „#‟ to enter VoIP Mode.
3. Press the pound sign „#‟ again to switch to Enter IP
Mode.
4. Enter the IP of the person you want to call. The IP
must be 12 digits in length and include leading
zeroes.
For Example: To call the IP 142.31.204.7 enter the
digits “142031204007”
Making a VoIP Call by Entering
a Phone Number
1. Pick up the telephone handset.
2. Press the pound sign „#‟ to enter VoIP Mode.
3. Enter the telephone number of the person you want
to call as normal.
If the telephone number and IP are stored in the
address book the call will be completed. Ten digit
phone numbers (ones with area codes) must be
started by entering a „1‟just like normal.

iTALK VoIP-1 User Manual
6
Making a VoIP Call Using Speed Dial
1. Pick up the telephone handset.
2. Press the pound sign „#‟ to enter VoIP Mode.
3. Press the asterisk sign „*‟ to enter Speed Dial Mode.
4. Enter the speed dial code of the person you want to
call.
If the speed dial code and IP are stored in the
address book the call will be completed.
Setting up the Address Book
Accessing the Address Book
1. Get your IP (see Getting Your IP on page 4).
2. Enter your IP into the address bar of a web browser
such as Internet Explorer.
The web page that comes up is stored on your VoIP-
1 device. This web page allows you to store phone
numbers and speed dial codes with their
corresponding IP‟s to simplify the VoIP calling
process.

iTALK VoIP-1 User Manual
7
Storing Information in the Address Book
1. Enter a person‟s contact information in the fields at
the top of the web page (see Figure 3).
2. Click on <Enter> to store their information.
The table at the bottom of the web page will be
updated with the new contact information (see
Figure 4).
Figure 3. Entering Contact Information

iTALK VoIP-1 User Manual
8
Figure 4. The Updated Table
Deleting Information in the Address Book
1. Click on the select box of the person‟s contact
information you want to delete.
A select box is one of the radial buttons in the first
column of the table.
2. Click on <Delete> to remove their information.
The table at the bottom of the web page will no
longer contain their contact information.

iTALK VoIP-1 User Manual
9
Contact Information
iTALK
4461 Interurban Rd.
Victoria BC, Canada
V9E 2C1
Phone: [phone]
Website: http://www.elex.camosun.bc.ca/italk
Technical Support
Nathan Dyczkowski
email: dyc[email protected]
Sales & Marketing
Mathew Bennett
email: [e-mail]
Warranty Information
This iTALK product is not warranted against any
defects in materials and workmanship. iTALK does not
certify that this product met its published specifications
at the time of shipment. No guarantee of correct
operation of this device as expressed in the preceding
document is given. iTALK shall not be liable for any
errors contained herein or for incidental or
consequential damages in connection with the use of
this product. No service or repair of this product will be
provided by iTALK.