iTaste MVP 2.0 User manual

WARNING:
1. This Advanced Personal Vaporizer may be used with
e-liquids that contain nicone.
Please check with your
e-liquid provider.
This product is only intended for use
by adults of legal smoking age (18+) and should not be
used by children, women who are pregnant or
breaseeding, or persons with or at risk of heart
disease, high blood pressure, diabetes or taking
medicine for depression or asthma, or who otherwise
may be sensive to nicone. Nicone is addicve and
habit forming, and it is very toxic by inhalaon, in
contact with the skin or eyes, or if swallowed. Ingeson
of the non-vaporized concentrated e-liquid ingredients
can be poisonous. Keep away from children and pets.
2. This Advanced Personal Vaporizer may be used with
e-liquids that contain nicone, a chemical known to the
State of California to cause birth defects or other
reproducve harm.
Please check with your e-liquid
provider.
(For products sold in California.)
3. This Advanced Personal Vaporizer is only designed to be
used with high quality e-liquid.
Please check with your
e-liquid provider.
This device is not intended for use
with loose tobacco leaf or herbal substances.
4. This Advanced Personal Vaporizer has not been
evaluated by the Food and Drug Administraon and is
not intended to treat, migate, prevent or cure any
disease or condion. This product is not intended for
use as a smoking cessaon device.
5. This product is intended for use with the charger
provided with the unit. We recommend you always use
a high quality 5V 500mA USB wall charger (CE/UL
Cerfied). Use of unauthorized chargers may lead to
overheang and possible burning of items in contact
with the unit. Innokin Technology is not responsible for
baery and charger explosions, fires or malfuncons
due to the use of a low-quality charger. This product
does not come included with any wall charger.
6. This Advanced Personal Vaporizer does not come
included with car charger or car charger adapter. This
device is not designed for use with a car charger. Use of
unauthorized chargers may lead to overheang and
possible burning of items in contact with the unit.
7. All empty clearomizers must be disposed of properly
and out the reach of children and pets.
8. This Advanced Personal Vaporizer includes small parts
such as the mouth piece. Always keep any small parts out
of reach of children and pets to prevent swallowing or
other harm.
9. Obey local laws or regulaons regarding Electronic
Cigarees when vaping. If you are in an area where there
are any bans or potenal dangers, please do not use your
Advanced Personal Vaporizer.
10.Do not misuse, mishandle or store your Advanced
Personal Vaporizer improperly. Even though it is made of
high quality stainless steel it may become damaged when
dropped or otherwise mishandled.
11.
Do not drop, throw, or mishandle your Advanced Personal
Vaporizer as the outer shell or inner components may
become damaged. If the shell of the device becomes
damaged or the structural integrity of the baery
becomes compromised, disconnue use immediately and
contact your Authorized Innokin
Technology Vendor.
12.In order to prolong the operaon of your Advanced
Personal Vaporizer, please do not place or store in
excessively hot or cold environments.
13.Your Advanced Personal Vaporizer is not waterproof.
Keep it dry at all mes. Do not submerge this device
or expose it to moisture.
14.Keep your Advanced Personal Vaporizer away from
sources of excessive heat or cold as damage may
occur.
15.Do not aempt to repair the unit by yourself as
damage or personal injury may occur.
16.In order to guarantee the normal funconing of your
Advanced Personal Vaporizer, and maximize the
pleasure of vaping, we strongly advise that you
charge the baery when the power level drops below
10 percent.
17.Do not leave the baery depleted for long periods of
me between recharging or the baery capacity may
be decreased.
18.Do not leave this device unaended while charging.
19.If the device becomes excessively hot, disconnue
use immediately and contact your Authorized Innokin
Technology Vendor.
20.If the device will not power off, disconnue use
immediately and contact your Authorized Innokin
Technology Vendor.
21.If the device funcons in a way which is not stated in
the manual contact your Authorized Innokin
Technology Vendor.
22.As this device has an internal Lithium Ion Baery, the
lifespan of the product will be limited.
Warranty
Please consult with Innokin official distributors for their
warranty and return policy. Innokin’s warranty does
not apply to products purchased through third party
vendors.
iTaste MVP is a microprocessor controlled VV/VW
personal vaporizer that lets you easily adjust the
voltage and waage with just a few buon presses.
Specificaons:
Main Features:
Variable Voltage:
Voltage can be adjusted from 3.3 – 5.0 volts in .1 volt
increments.
Variable Waage:
Waage can be adjusted from 6.0 – 11.0 W in .5 was
increments.
Ohms meter :
Reads resistance of your atomizer/cartomizer/clearomizer.
MVP 2.0
Size : 23*41*107mm
Operang Voltage : 3.3V-5.0V
Operang Waage : 6.0W-11.0W
Baery capacity : 2600mAh
Puff counter will record the number of puffs you have
taken. Either press “ P ”buon or “ U” buon 1 second
to check puffs, The Puff Counter will be cleared when
the device is turned off.
Puff Counter:
Please read this secon carefully to ensure you
receive maximum benefits from your iTaste MVP and
enjoy vaping with it in the most safe and effecve
ways possible.
Short Circuit/Atomizer Protecon protects the iTaste
MVP against shorted atomizers.
The iTaste MVP monitors the baery voltage and will
automacally turn off when the baery is discharged.
The iTaste MVP baery capacity is displayed via
green, yellow and red LED lights.
Green = Fully Charged
Aer the iTaste MVP is fully recharged, the LED lights
will turn off.
Yellow = Half Discharged
Red = In need of charging
iTaste MVP built-in 2600 mAh polymer Li-Ion
rechargeable baery.
Short Circuit/Atomizer Protecon:
Over-Discharge Protecon:
Baery Level Indicator:
Large baery capacity:
High compability 510 connector:
Thread fit iClear10, iClear16 , iClear30 etc.
USER MANUAL
Welcome to the iTaste MVP
An Advanced Personal Vaporizer from Innokin
Technology with Variable Voltage , Variable Waage
and Passthrough Charging.
Congratulaons on purchasing this original iTaste MVP
& Welcome to the Future.
First of all, please ensure that your iTaste MVP is a Real
Innokin Technology product.
To verify that this iTaste MVP is a real Innokin
Technology device please:
1) Locate and Scratch to reveal your iTaste MVP Unique
Authorizaon number which is included on a label on
the reverse of the packaging.
2) Visit the Official Innokin Technology website at
hp://www.Innokin.com.
3) Enter the Unique Authencaon number in the
Authencaon field.
4) Verify your iTaste MVP is a Real Innokin Technology.
If you have any quesons or suggesons we would like
to invite you to please write to us at
[email protected]. We are looking forward to
hearing from you. Join our Innokin FaceBook Page:
www.facebook.com/Innokin.Technology for the latest
informaon and to win great prizes!!

If the buon is held down for 10 seconds or longer,
the iTaste MVP will shut itself off unl the buon is
released and pressed again.
The iTaste MVP uses a built in Micro USB Port. You can
recharge it with a Micro USB cable. It can also work as
a pass-through for use while charging.
Remembers last set voltage or waage when the
baery is turned off and then back on.
Digital display shows Ohms meter, Voltage / Waage
seng, number of puffs taken since last me the
baery was turned off.
Turn ON the small pin switch in boom of iTaste MVP,
connect cable into USB OUTPUT port (DC 5V , maximum
output current 0.5A, the 3 most popular power
connectors for iPhone / iPods, MiniUSB (Motorola /
Blackberry), a Micro USB (Motorola / Nokia / LG /
Samsung). Turn OFF the small pin switch when finish
charged your electronics .
buon will acvate the baery.
Press the “U” buon for 3 seconds to enter variable
voltage mode. The screen will show you the Puff
counter first followed by the last adjustment (The last
adjustment may be a voltage or waage seng), aer
showing the last adjustment, the iTaste MVP will enter
variable voltage mode. Voltage can be adjusted from
3.3 to 5.0 volts in .1 volt increments by pressing the
“U” buon.
Press the “P” buon for 3 seconds to enter variable
waage mode. The screen will show you the Puff
counter first followed by the last adjustment (The
last adjustment may be a voltage or waage seng),
aer showing the last adjustment, the iTaste MVP
will enter variable waage mode. Waage can be
adjusted from 6.0 to 11 was in. 5 wa increments
by pressing the “P” buon.
Hold both the “P” and “U” buons simultaneously for
2 seconds. The screen will show a series of readings,
the first being the resistance of the aached load (Rx.x,
for example R2.2), the second being the baery
voltage, the third being the number of puffs since the
device was last turned off and the fourth being the last
set voltage or waage. If no load is aached the
display with show “NON”.
If you wish to check the number of puffs taken since
the iTaste MVP was last turned off, you can also hold
either the “P” or the “U” buon to display the Puff
Counter which will be followed by the display of
current mode (VV mode or VW mode). In this state,
you can also adjust the voltage or waage by pressing
the “P” or “U” buon.
ON/OFF baery switch:
Quickly clicking “ ” three mes will enable or disable
the baery. Once enabled, holding down the buon
will acvate the baery.
This safety feature prevents the atomizer from
turning on while it's in your pocket or bag and it
prevents any sengs from geng changed without
you knowing.
There are three main buons on the iTaste MVP: “ ”
buon, “P” buon and “U” buon; all the funcons can
be acvated by using those three buons to change
sengs in a single step, without the use of a menu
system. Your chosen mode will be displayed on the
digital screen.
Quickly clicking the “ ” buon three mes will enable
or disable the baery. Once enabled, holding down the
10 seconds cutoff:
Passthrough:
Remembers last set voltage or waage :
Built-in 3 digit display :
Portable power source for electronic products
OPERATION GUIDE
ON/Off:
Variable Voltage Mode :
Variable Waage Mode :
Ohms Meter & Baery Level Indicator & Puff Counter:
7
6
5
4
3
2
1
1
2
5
6
7
3
4
NO. Funcon descripon
iClear dual coil clearomizer
ON/OFF Power buon:
The iTaste MVP baery capacity is displayed via green,
yellow and red LED lights. Green = Fully Charged
Yellow = Half Discharged Red = In need of charging
“P” buon: VW
“U” buon: VV
Portable power source for electronic products
Turn ON this small pin switch when use as power source
for electronic products .
Recharge iTaste MVP with a standard USB Micro cable
plug, it can also work as a passthrough for use while
charging.
cartomizer or clearomizer. Connecng to a volt meter
without the load required for high voltages can
damage the device.
Don’t abuse your iTaste MVP although it’s made of
metal; You can damage it by dropping it.
Set lower voltages /waage for lower Ohms, higher
voltage/waage for higher Ohms.
When plug in, the LED light will blink from red to
yellow to green, then stay on current baery capacity
level, for example, if your baery current capacity
yellow, then LED light will stay on Yellow, then change
to Green. Aer the iTaste MVP is fully recharged, the
LED lights will turn off.
Recharge iTaste MVP with a standard USB Micro cable
plug, it can also work as a passthrough for use while
charging.
Plug the USB cable into iTaste MVP’s input and plug
the other end into a power source.
The color of the LED light indicates the remaining
baery life. Aer the iTaste MVP is fully recharged,
the LED lights will turn off.
1. Red LED light = baery voltage is lower than 3.61V
2. Yellow LED light = baery voltage between 3.61V
and 3.75V
3. Green LED light = baery voltage is more than 3.75V
4. Red LED will keep blinking for 8 seconds when
baery capacity is lower than 3.3V and the device
will turn off automacally.
5. Red LED light will stay on for 5 seconds when a load
short circuit is detected or the current of the coil is
more than 3.5A, then no vapor will be produced.
6. If you take a drag for longer 10 seconds, the baery
will stop it’s output, the RED light will blink 10 mes,
and the iTaste MVP won’t connue to work unl
you press the power buon again.
The LED light will blink in different colors to indicate
the current baery voltage.
LED Light Blinking Mode:
Replace or refill the cartridge if vapor volume decreaes.
The manufacturer is not responsible for a damaged
atomizer, cartomizer or clearomizer.
Driving them with too much power for too long or
running them dry can burn them out.
We recommend you start with a low voltage seng
and work your way up unl when you find the right
seng for your atomizers, cartomizers or clearomiers.
Never use your iTaste MVP without an atomizer,
Notes:
CHARGING ITASTE MVP
OR