ITC T-776A User manual

OWNER'S MANUAL
Active Speaker
Active Speaker
T-776A/776AWT-776A/776AW
T-776A/776AW
Safety Tips
Readers
Warning Such as the inappropriate use of staff will cause
injury, death and property damage.
Please be sure to use the former reading detailed notes.
Really pay attention to this manual and a safety with the important warning.
Recommend that you keep this manual for future reference.
When installed loudspeakers
Definitely will not be allowed to speakers and any exposure in the rain-wet
or water, may be inconsistent with ,or fire.
Restricted by the provisions of the speakers on the voltage, such as the
use of high voltage may cause electric shock or fire disaster. Is no pruning,
distorted, or replacement of damaged wires.
Avoid instability in the installation or set up speakers, such as shaking the
table or flat surface , the speaker can avoid falling caused personal injury
or property damage.
Speakers will be installed in support of the speaker or the weight of a solid
shelf. Speaker swap can be avoided caused personal injury or property
damage.
Wet hands must not be admitted into or plugs, may lead to electric shocks.
The allocation of plugs, make sure that pull plugs, rather than pull wires.
The use of a damaged power line of machinery may cause fire or electric
shock.
Mobile speaker, you plug the prior allocated. If the speaker and plugs may
be moving together will cause fire or electric shock.For plugs,identified as
plugs for grip.
Will not be allowed to speakers on the vent cover. May cause internal
heating caused by the fire.
Avoid speakers installed in the humidity or dust, direct contact with the sun,
from the near-electric, or smoke or steam, may cause fire or electric shock.
Common warning signs and security
The manual shown warning signs and security is to prevent the improper
operation due to personal injury arising from the loss of property, please
read before using this product must understand that this manual security
symbols and Warning to indicate fully aware of potential risks.
Dear customers,your use of the broadcasting company speaker series. We
would like to extend my heartfelt thanks to all of the Company manufactured
products have been tested before, the commitment to keep its quality. Loud -
speakers broadcast Pan-for hotels, commercial buildings, supermarkets,
schools, leisure and entertainment venues, is your ideal choice. For your
installation, commissioning and use of this product, the installation please
read this note.

Dimension
Installation
Specifications
216 mm
245mm
295 mm
216mm
235 mm
100 mm
Frequency Response
Rms
Input Sensitivity
25Wx2@8
0.7V
Dimension
Weight
216 245 295 mm
Treble Control
Ac Power Supply
220V~240V/50Hz~60Hz
10dB
Model T-776A
70Hz~20KHz/1W, 0.5dB
Bass Control 10dB
10.1Kg
T-776A/776AW
T-776AW
Power Supply
Power switch
R/Speaker output
Power indicator
R/S indicator
L/S indicator
Right balanced input
Mode switch
Left balanced input
3.5mm stereo jack input
L / R unbalanced input
Bass control
Treble control
Volume control
10mm 4mm
13.5mm 125mm
(Figure:Speaker hole size)
5. The completion of speakers in the
walls of the entire installation
process.
12
3
Wall Wall
Wall Wall
2. (Figure) Withmeasuring tools, measure
parts speaker holeand the holesize and
the distance betweenplaces, and selected
in line with thescrew hole will befixed for-
tunately, speakerwall accessories.
1. Speaker weight of10.1Kg, must
be chosen byour body strongand
avoid unstable speakersfalling
or injuries.
3. Wall speakerinstallation method to
choose any ofthe two.
4. The horngently into theaccessories
have been installedon the walls,the
speakers up anddown with twoholes
the other two partsalign with the nut.
selected in linewith the hornscrew
hole bit, fixed.
45
Wall Wall
AC 220V~240V/50Hz~60Hz