ITC T-6222 User manual

AM/FM TUNER
T-6222
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
OPERATION MANUAL
PUBLIC ADDRESS SYSTEM
ON
OFF
POWER
CH FREQ BAND
IR
AM/FM TUNER
T-6222

TABLE OF CONTENTS
1. SAFETY PRECAUTIONS .......................................................................................3
2. GENERAL DESCRIPTION ....................................................................................5
3. FEATURES ...............................................................................................................5
4. NOMENCLATURE AND FUNCTIONS
4.1 Front Panel ............................................................................................................. 6
4.2 Rear Panel..............................................................................................................6
4.3 Remote control
5. TUNER ............................................................................................... 8
6. APPLICATIONS .......................................................................................................9
7.SPECIFICATIONS .................................................................................................. 10
8.DIMENSIONAL DIAGRAM ....................................................................................11
........................................................................................................7
OPERATION
2

Be sure to read the instructions in this section carefully before use.
Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
regarded as very important precautions are included.
We also recommend you keep this instruction manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
When Installing the Unit
Do not expose the unit to rain or an environment
where it may be splashed by water or other liquids,
as doing so may result in fire or electric shock.
Use the unit only with the voltage specified on the
unit. Using a voltage higher than that which is
specified may result in fire or electric shock.
Do not cut, kink, otherwise damage nor modify the
power supply cord. In addition, avoid using the
power cord in close proximity to heaters, and never
place heavy objects -- including the unit itself -- on
the power cord, as doing so may result in fire or
electric shock.
Be sure to replace the unit's terminal cover after
connection completion. Because high voltage is
applied to the speaker terminals, never touch these
terminals to avoid electric shock.
Be sure to ground to the safety ground (earth)
terminal to avoid electric shock. Never ground to a
gas pipe as a catastrophic disaster may result.
Avoid installing or mounting the unit in unstable
locations, such as on a rickety table or a slanted
surface. Doing so may result in the unit falling
down, causing personal injury and/or property
damage.
When the Unit is in Use
Should the following irregularity be found during
use, immediately switch off the power, disconnect
the power supply plug from the AC outlet and
contact your nearest dealer. Make no further
attempt to operate the unit in this condition as this
may cause fire or electric shock.
If you detect smoke or a strange smell coming
from the unit.
If water or any metallic object gets into the unit
If the unit falls, or the unit case breaks
If the power supply cord is damaged (exposure of
the core, disconnection, etc.)
If it is malfunctioning (no tone sounds.)
To prevent a fire or electric shock, never open nor
remove the unit case as there are high voltage
components inside the unit. Refer all servicing to
your nearest dealer.
ITC
ITC
Do not place cups, bowls, or other containers of
liquid or metallic objects on top of the unit. If they
accidentally spill into the unit, this may cause a fire
or electric shock.
Do not insert nor drop metallic objects or
flammable materials in the ventilation slots of the
unit's cover, as this may result in fire or electric
shock.
1. SAFETY PRECAUTIONS
3

An all-pole mains switch with a contact separation of at least 3 mm in each pole shall be incorporated in
the electrical installation of the building.
When Installing the Unit
Never plug in nor remove the power supply plug
with wet hands, as doing so may cause electric
shock.
When unplugging the power supply cord, be sure
to grasp the power supply plug; never pull on the
cord itself. Operating the unit with a damaged
power supply cord may cause a fire or electric
shock.
When moving the unit, be sure to remove its power
supply cord from the wall outlet. Moving the unit
with the power cord connected to the outlet may
cause damage to the power cord, resulting in fire or
electric shock. When removing the power cord, be
sure to hold its plug to pull.
Do not block the ventilation slots in the unit's cover.
Doing so may cause heat to build up inside the unit
and result in fire.
Avoid installing the unit in humid or dusty locations,
in locations exposed to the direct sunlight, near the
heaters, or in locations generating sooty smoke or
steam as doing otherwise may result in fire or
electric shock.
When the Unit is in Use
Do not place heavy objects on the unit as this may
cause it to fall or break which may result in
personal injury and/or property damage. In
addition, the object itself may fall off and cause
injury and/or damage.
Make sure that the volume control is set to
minimum position before power is switched on.
Loud noise produced at high volume when power is
switched on can impair hearing.
Do not operate the unit for an extended period of
time with the sound distorting. This is an indication
of a malfunction, which in turn can cause heat to
generate and result in a fire.
Contact your dealer as to the cleaning. If dust
is allowed to accumulate in the unit over a long
period of time, a fire or damage to the unit may
result.
ITC
If dust accumulates on the power supply plug or in
the wall AC outlet, a fire may result. Clean it
periodically. In addition, insert the plug in the wall
outlet securely.
Switch off the power, and unplug the power supply
plug from the AC outlet for safety purposes when
cleaning or leaving the unit unused for 10 days or
more. Doing otherwise may cause a fire or electric
shock.
SAFETY PRECAUTIONS
4

3. FEATURES
The T-6222 is a public address amplifier switch with can provide an ideal public address solution from
small to big places such us mosques, schools, hotels and factories to train stadium and air stations.
2. GENERAL DESCRIPTION
1. the standard chassis design, 1U aluminum alloy panels, beautiful and practical;
2. support AC220V, DC24V power supply mode;
3. the standard output 775mV music signal;
4. built-in 8 / 2W to monitor volume;
5. LCD display, buttons, infrared operation;
6. the microcomputer control, light touch keys operation;
7. 1 road mono audio signal output;
8. FM/AM (FM/AM) optional receive two band, radio frequency memory storage can be up to 99;
9. radio frequency automatic search storage function, and can be power off memory function;
10. More than 10, choice of equipment with address code in address confirm when used at the same time;
11. FM 0. 5 MHz step; AM to 9K / 10K step (optional).
5

4. NOMENCLATURE AND FUNCTIONS
4.1 FRONT PANEL
234
178
1. LCD DISPLAY
2. The infrared receiving head
3. Monitor Speaker
4. Band switch button
5. FM/adjusting button up
6. Frequency up/down adjustment button
7. POWER SWITCH
On top of the opening Power
Press the end, power shut down
8. POWER
Power indicator
6
ON
OFF
POWER
CH FREQ BAND
IR
56
4.2 REAR PANEL
9. AC POWER INPUT
10. AUDIO OUTPUT
11. MONITOR VOLUME
12. FM BAND 75 OHM ANTENNA
13. AM-BAND ANTENNA
10 11 12
9
AUDIO OUTPUT
R
L
MON VOL
MIN MAX
ANTENNA
FM75 AM
13

NOMENCLATURE ANDFUNCTIONS
7
4.3 REMOTE CONTROL
MUTE POWER
123
456
789
+10
0
TUNE+
TUNE-
CH+CH-
SWITCH
F. INPUT AM/FM
MONO/
STEREO
AUTO
MEM
AUTO/
MANUAL
MEM
3
6
17
8
10
3
125
9
2
114
9
1 Mute button
2 Number keys
3 Last
4 frequency input
5 Radio auto / manual switch button
6 Manual / automatic mode button
7 Power button
8 On / Off key
9 Radio button
10 AM/FMconversion
11 Channel shift keying
12 Manual key
ON
OFF
POWER
CH FREQ BAND
IR
AUDIO OUTPUT
R
L
MON VOL
MIN MAX
ANTENNA
BATT SUPPLY
24V 2A FM75 AM
4.2 REAR PANEL(+24V)
9. AC POWER INPUT
10. DC 24V INPUT
11 AUDIO OUTPUT
12. MONITOR VOLUME
13. FM BAND 75 OHM ANTENNA
14. AM-BAND ANTENNA
11 12 13
914
AUDIO OUTPUT
R
L
MON VOL
MIN MAX
ANTENNA
BATT SUPPLY
24V 2A FM75 AM
10

5. TUNER OPERATION
FM 104.70
AM
FM
STEREO MUTE AM/FM MEMORY AUTO
MHz
KHZ 02 mSEC
MIN
cHdB
CINEMA DSP
FM 104.70
AM
FM
STEREO MUTE AM/FM MEMORY AUTO
MHz
KHZ 02 mSEC
MIN
cHdB
CINEMA DSP
FM 104.70
AM
FM
STEREO MUTE AM/FM MEMORY AUTO
MHz
KHZ 02 mSEC
MIN
cHdB
CINEMA DSP
FLUORESCENCE DISPLAY
TUNER OPERATING
1. Open power supply switch on, fluorescence
show last time close employment state.
Stereo show Auto tune show
Wave band show
Frequency show
Frequency unit show
Wave band show Frequency show
2. Select broadcast wave band
As if show an't want to wave band, invite
press Wave band key stoke accept of wave
band, per Press once, give switch fm/am.
3. Select broadcasting station means
Auto tune show occasionally auto illumine
Per press once auto /
Manual tune select key
(auto/ma)give switch
4. Select broadcast broadcasting station
Press key up direction high end frequ-
ency search, press key down direction
low end frequency search.
Auto tune occasionally: Auto take over one
Broadcasting station
Manual tune occasionally: Repeat press(or
Persist press)up to select broadcasting station
FM 104.70
AM
FM
STEREO MUTE AM/FM MEMORY AUTO
MHz
KHZ 02 mSEC
MIN
cHdB
CINEMA DSP
Auto tune show occasionally auto illumine
8

6. APPLICATIONS
REAR PANEL CONNECTIONS
9
MIXER AMPLIFIER
AUX2 OUT
AUX1
MIC2 MIC3
MUTE EMC INPUT
MIC2 MIC3
LINE INPUT
OUTPUT
COM 4-16 70V 100V
AM ANTENNA
FM ANTENNA
AUDIO OUTPUT
R
L
MON VOL
MIN MAX
ANTENNA
FM75 AM

7.SPECIFICATIONS
MODEL
AM/FM TUNERAM/FM TUNER
T-6222
TUNERTUNER
76-108MHz 520-1720kHz
=20uV =6.0mV/m
=40dB =36dB
FREQUENCY RESPONSE
SENSITIVITY
SIGNAL / NOISE RATIO
FM
FM
FM
AM
AM
AM
DIMENSION(mm)
NET WEIGHT
GROSS WEIGHT
484X350X44
POWER CONSUMPTION
POWER REQUIREMENTS
~220V-240V 50/60Hz
5Kg
3.8Kg
10VA
10

100
Over
100
Over
Over
100
8. DIMENSIONAL DIAGRAM
UNIT :mm
6
44
41
350
44
50
436
484
UNIT :mm
11
ON
OFF
POWER
CH FREQ BAND
IR
AUDIO OUTPUT
R
L
MON VOL
MIN MAX
ANTENNA
FM75 AM
ON
OFF
POWER
CH FREQ BAND
IR

PUBLIC ADDRESS SYSTEM
Version V0.1