Itek I58004 User manual

I58004
®
QUALITY REFLECTED
FM Tower
Speaker
INSTRUCTION MANUAL
*For an additional one year guarantee*
please register your product
at
www.itekbrand.co
and enjoy the peace of mind
of a
Q U A LITY REFLECTED
®
Imported & Distributed throughout the U.K.by PFD. ST4 2NL
www.itekbrand.co
I58004_IM.indd 2-3 3/13/2013 4:01:46 PM

Specications
I58004
Power Supply:AC 220V-240V ~50Hz
Wattage: 60W
Speaker Units: 4x5w“ speaker
Power output:2x10W+1x25W
Sutton House,
Berryhill Road,
Fenton
Stoke on Trent
Staordshire, UK.
ST4 2NL
Postal Address Only
Features
Built-in FM radio Aux input USB port SD/MMC card slot
Wireless Remote Control
Box Contents
Instruction Manual itower Speaker Wireless Remote Control
Power Adaptor 3.5mm auxiliary cable Base and screws to attach the unit
Getting Started
Remove the unit from the box.
Remove packaging and place inside the box to either store or dispose of safely.
Imported & Distributed throughout the U.K.By PFD. ST4 2NL
www.itekbrand.co
Parts Identication
Skip -
Play/Pause
Skip +
SD/MMC
card slot Aux in Port USB Port
FM LED
Indicator
Volume
down
Volume
up
Mode
Power
On/O
DC IN
socket
Standby/On
Play/Pause
Number
keys
Repeat
USB/SD
card
Volume
up
Volume
down
Mode Mute
Skip +
Skip -
To change the Batteries follow the
diagram below
I58004_IM.indd 4-5 3/13/2013 4:01:47 PM

When using electrical appliances, basic safety precautions should always be taken.
is unit is not intended for use by children or the inrm. ey should be given
supervision and instruction on the use of the appliance by a person responsible for their safety.
Ensure the unit is not too close to heat emitting devices or placed in direct sunlight.
Check that the voltage indicated on the data plate corresponds with that of the local
network before connecting the unit to the power supply.
Do not leave the unit unattended while connected to the power supply.
Do not immerse the unit in water or any other liquids.
It is imperative to unplug the power cord aer the unit has been used, before it is cleaned
and while being repaired.
Close supervision is required when using this unit near children.
Never leave the unit within reach of children.
Repairs to electrical devices should only be performed by qualied personnel.
Improper repairs may place user at serious risk.
is unit is intended for household use only and should not be used for industrial or commercial
purposes.
Do not operate this unit with a damaged plug or cord, aer a malfunction or aer being dropped
or damaged in any way.
Do not use this unit for anything other than its intended use.
is unit must be placed on a stable heat resistant surface.
Do not push objects into any openings as damage to the unit and/or electric shock may occur.
Do not use this unit in wet or bad weather conditions.
is product is not a toy.
Do not play music at excessive levels, especially near children.
SETTING UP YOUR SPEAKER
Attaching the base
1. Carefully take the tower speaker and base out of the packaging.
2. Take the screws out.
3. Attach the base to the body aligning the four holes in the base with the four holes in the tower
speaker.
4. Screw the base into the body.
5. Stand the tower upright on the oor. e unit is now ready for use.
IMPORTANT INSTRUCTIONS
RETAIN FOR FUTURE USE
INSTRUCTIONS FOR USE
Turning the Digi tower On
Position the unit where it is going to be used. Connect the AC-DC adaptor to the speaker and
plug the adaptor to the power supply. Switch the power on/o button at the back the speaker to on
position. Press the standby/on button on the top panel to turn the speaker on.
Listening to the Radio
Aer the speaker is turned on, press the mode button to select the FM radio mode. e LED indi-
cator of FM will light up. Press the skip+ / skip- button to select the desire radio station.
Adjusting the volume
1. Press the volume up/down button to adjust the speaker to the desired volume level.
2. Pressing the mute button on the remote control will mute the speaker, pressing the mute
button again will resume the sound. Listening to MP3 music on an SD/MMC card
Listening to MP3 music on an SD/MMC card
1. Aer the speaker is turned on, insert the SD/MMC card to the SD/MMC card slot.
2. Press the mode button repeatedly to select SD/MMC card mode. e LED indicator of the
SD/MMC card slot will light up and the MP3 music in the card will play automatically.
3. Press the skip+ / skip- button to select the desired music track.
4. Inputting the track no. via the number keys on the remote control can directly select
the desired track on the SD/MMC card.
5. Pressing the Play/Pause button will pause the music, pressing the Play/Pause button again will
resume the music.
Listening to MP3 music on a USB Flash drive
1. Aer the speaker is turned on, insert the ash drive into the USB port.
2. Press the mode button repeatedly to select USB mode. e LED indicator of USB port will
light up and the MP3 music on the ash drive will play automatically.
3. Press the skip+/skip- button to select the desired music track.
4. Inputting the track no. via the number keys on the remote control can directly select
the desired track on the ash drive.
5. Pressing the Play/Pause button will pause the music, pressing the Play/Pause button again will
resume the music.
I58004_IM.indd 6-7 3/13/2013 4:01:47 PM

Instructions for Use
Listening to MP3 music on a USB Flash drive
1. Aer the speaker is turned on, insert the ash drive into the USB port.
2. Press the mode button repeatedly to select USB mode. e LED indicator of USB port will
light up and the MP3 music on the ash drive will play automatically.
3. Press the skip+/skip- button to select the desired music track.
4. Inputting the track no. via the number keys on the remote control can directly select the
desired track on the ash drive.
5. Pressing the Play/Pause button will pause the music, pressing the Play/Pause button again
will resume the music.
Note:
In this mode, Remote Control can only control volume. All the other controls need
to be regulated from the source device.
Do’s and Don’ts
DO Unplug the AC-DC adaptor from the power supply when not in use and before cleaning.
Do not play music at excessive volume levels as damage to hearing may occur.
Do not use this unit in wet or damp surroundings
To clean the unit it is recommended that a clean dry so cloth is used
to remove any dust build up and for stubborn dirty marks a damp so cloth with a small amount
of detergent is used
Do not use abrasive cleaners or solvents
is product is guaranteed for 12 months from the date of the original purchase.
If any defect arises due to faulty materials or workmanship the faulty products must be returned
to the place of purchase. Refunds or replacement are at the discretion of the Retailer .
e following conditions apply:
e product must be returned to the retailer with the proof of purchase.
e product must be installed and used in accordance with the instructions contained in this
instruction guide.
For domestic purposes. ONLY.
It does not cover wear and tear, damage, misuse or consumable parts.
PFD has limited responsibility for incidental or consequential loss or damage.
Valid in the UK and Eire only.
GUARANTEE.
Battery Disposal
Do not dispose of batteries in household /domestic waste always ensure that they
are taken to a battery collection point or your local council refuse recycling centre.
Disposal instructions for Itek items in accordance with the WEEE directive.
Appliances bearing the symbol shown here may not be disposed of in domestic
rubbish. You are required to dispose of old electrical and electronic appliances like this separately.
Please visit www.recyclemore.co.uk, or www.recyclenow.co.uk for access to information about the
recycling of electrical items.
Please visit www.weeeireland.ie for access to information about
the recycling of electrical items purchased in Ireland.
e WEEE directive, introduced in August 2006, states that all electrical items must be recycled, rather
than taken to landll. Please arrange to take this appliance to your local Civic Amenity site for recy-
cling, once it has reached the end of its life.
DISPOSAL OF UNIT
DECLARATION OF CONFORMITY
We PFD Ltd Declare that this product conforms to all the following
product legislation
In accordance with the following directive(s):
2004/108/EEC. e Electromagnetic compatibility Directive
2006/95EC. e LVD directive (Low Voltage Directive)
2002/95/EC. e RoHS. Directives (Restriction of Hazardous substances Directive)
Peter Bowden
Quality Assurance Manager
Sutton House, Berryhill Road, Fenton, Stoke-On-Trent,
Staordshire, UK. ST4 2NL.
I58004_IM.indd 8-9 3/13/2013 4:01:47 PM
Table of contents
Other Itek Speakers manuals