IXL PIT N GRILL IXLPIT Installation guide

USE, CARE AND INSTALLATION
INSTRUCTIONS
FOR YOUR NEW IXL PIT N GRILL FIRE PIT
Models: IXLPIT IXLPITKIT IXLPGKITDEL
Stylish re pit with optional rotisserie ability & BBQ plates
for easy entertaining

Models: IXLPIT, IXLPITKIT, IXLPGKITDEL
Thank you for purchasing an IXL Pit ‘N’ Grill
If you enjoy an outdoor re, create a warm and enticing atmosphere in your backyard,
garden or whilst camping with the versatile Australian made and designed IXL Pit n Grill.
Not only can you enjoy a roaring open re, but with optional accessories you can create a
tantalising spit roast or delicious BBQ feast.
The IXL difference
Our re pits are designed and created in our factory in Geelong, Victoria. Their creation
was brought about by a passionate team of engineers and designers who love a ame re
and are enthusiastic campers, BBQ chefs and outdoors people.
Many hours were spent on the design and testing of our re pits to ensure their 2.4mm
mild steel constructed bowl and strong 5mm steel legs were up to the high quality of the
IXL brand. A wet spray high temperature coating was the nish added to the pits as further
insurance on outdoor protection and the product’s durability. We hope you enjoy many
hours with your IXL re pit.
Easy to Setup and transport
Our Pit n Grill range is designed for ease of use and transportation. The pit bowl is simply
lifted off the legs, which are slotted together. These are then removed and pack at. A
reusable crate is supplied with the pit for storage and transporting.
Take care when lifting & assembling your IXL PitNGrill as it is heavy.
WARNING:

Models: IXLPIT, IXLPITKIT, IXLPGKITDEL
CAUTION
Young children must be supervised when in the vicinity of this re pit, when in
operation.
This product is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities or lack of knowledge, unless they have
been given supervision or instructions concerning the use of the appliance
by a person responsible for their safety and have the capacity to follow these
instructions.
This product can become very hot and cause burns. Particular attention must be
given where children and vulnerable people are present.
This re pit is not intended for use by young children or inrm people without
supervision.
1. This appliance is for outdoor use only, and shall NOT be used in a building, garage,
or any other enclosed area.
2. Do NOT use this outdoor re pit for indoor heating. TOXIC carbon monoxide fumes
can accumulate and cause asphyxiation.
3. This outdoor re pit is NOT for commercial use.
4. This outdoor re pit is NOT to be operated by children.
5. This outdoor re pit is NOT to be used in or on boats or recreational vehicles.
6. Always use in accordance with all applicable local, state and national codes. Contact
your local council for details on outdoor burning.
7. When using this outdoor re pit, exercise the same precautions you would with any
open re.
8. The use of alcohol, prescription or non-prescription drugs may impair the consumer’s
ability to properly assemble or safely operate this outdoor re pit.
9. Do NOT use this outdoor re pit without reading the entire “Owner’s Manual”.
10. This outdoor re pit is recommended for use with dry, seasoned hardwood. It will
burn hotter, more completely and create less smoke. Or with heat beads and charcoal
when cooking.
WARNING:

Models: IXLPIT, IXLPITKIT, IXLPGKITDEL
CAUTION
Page 4
11. Do NOT burn manufactured logs, driftwood, trash, leaves, paper, cardboard, plywood,
painted or stained or pressure treated wood.
12. Do NOT alter this outdoor re pit in any manner.
13. Do NOT use this outdoor re pit until it is COMPLETELY assembled and all parts
are securely fastened and tightened.
14. Do NOT store or use gasoline or other ammable vapours or liquids in the vicinity of
this or any other appliance.
15. Do NOT store or use an LP gas cylinder within 10 feet (3.05 m) of this outdoor re pit
while it is in operation.
16. Do NOT use this outdoor re pit near automobiles, trucks, vans or recreational
vehicles.
17. Do NOT use in an explosive atmosphere. Keep outdoor re pit area clear and free
from combustible materials, gasoline and other ammable liquids.
18. Do NOT use this outdoor re pit under any overhead or near any unprotected
combustible constructions. Avoid using near or under overhanging trees and shrubs.
19. Always use this outdoor re pit on a hard, level non-combustible surface such a
concrete, rock or stone. Do NOT use on wooden decks.
20. Always empty this outdoor re pit before each use. Leave a thin layer of ash to
protect the bottom.
21. Do NOT wear ammable or loose clothing when operating this outdoor re pit.
22. Do NOT use in windy conditions.
23. Do NOT use gasoline, kerosene, diesel fuel, lighter uid or alcohol to light or
relight res.
24. Keep all electrical cords away from a hot re pit.
25. All surfaces of this outdoor re pit are hot when in operation. To avoid burns, do
NOT touch re pit until it has completely cooled unless you are wearing protective
gear (Potholders, gloves, BBQ mittens, hot pads & etc.). Never touch ashes or coals
to see if they are hot.

Models: IXLPIT, IXLPITKIT, IXLPGKITDEL
26. Do NOT leave a lit outdoor re pit unattended, especially around children and pets
27. Do NOT attempt to move or store this outdoor re pit until all ashes and coals are
completely extinguished.
28. Do NOT remove ashes or coals until they are completely and fully extinguished.
29. Use heat-resistant gloves or hot pads when contacting handles.
30. Use long, sturdy re pit tools when adding or moving logs.
31. Do NOT overload the re pit. Do not add additional rewood until the re burns down.
32. Do NOT lean over this outdoor re pit when lighting or when in use.
33. Do NOT place a hot cooking plate or re tool onto combustible surfaces such
as grass, wooden deck or furniture.
34. Avoid breathing smoke from the re and avoid getting it into your eyes.
35. This outdoor re pit should be thoroughly inspected and cleaned on a regular basis.
36. After a period of storage and/or non-use, check for signs of damage and creosote
build-up. Do NOT operate until necessary repairs and/or clean-up are executed.
37. Deaths, serious injury or damage to property may occur if the above is not
followed exactly.
CAUTION

PREPARATION
1. Check the crate tick box to ensure the Fire Pit Kit you purchased is the one marked.
2. Unpack the crate. Take out the components pack from the crate. Make sure what is
listed in the below check list are included, for the kit you purchased. If anything is
missing, ask your retailer to provide it to you, or contact the IXL distributor.
3. Ensure you have a Philips Head screwdriver (not supplied) suitable for M6 screws
on the crate.
4. Read this instruction manual carefully before installation and use. Keep this instruction
manual in a safe place.
FIRE PIT KITS
IXLPGKITDEL
Pit n Grill (deluxe kit) Fire pit with
1 x grill plate and 1 x at plate,
rotisserie brackets & plate lifter
26kgs
In Crate: 820 W x 820 D x 170 H
780mm (D) x 375mm (H)
IXLPITKIT
Pit n Grill (standard kit) Fire pit with
rotisserie brackets
19kgs
In Crate: 820 W x 820 D x 170 H
780mm (D) x 375mm (H)
IXLPIT
The IXL Pit (starter kit) Fire pit bowl
and legs
18kgs
In Crate: 820 W x 820 D x 170 H
780mm (D) x 375mm (H)
*
*
Models: IXLPIT, IXLPITKIT, IXLPGKITDEL
CAUTION
Page 6

ASSEMBLY SPECIFICATION
Models: IXLPIT, IXLPITKIT, IXLPGKITDEL
Step One: Pit Leg Assembly
Position lower leg on
level surface
Align central slots in
upper & lower leg
Slide upper leg into lower
leg slot to complete the pit
leg unit
1 2 3
Step Two: Pit bowl Assembly Position pit inside form feature on legs.
It will self locate.
Step Three: Hot plate Assembly
(for models applicable)
Locate plate to pit with tabs
to maintain position.
Place hot plate segments inside the pit as required.
Note: These will become too hot to touch when in use &
will require the plate lifting tool for removal if required.

ASSEMBLY SPECIFICATION
ASSEMBLY SPECIFICATION
Models: IXLPIT, IXLPITKIT, IXLPGKITDEL
Step Four: Rotisserie Assembly (for models applicable, rotisserie not included)
Step Five: Windshield Assembly (for models applicable, accessory item)
Page 8
Easy to t & remove with no mess to clean up
Gasmate Rotisserie will t
to upright arms
75mm Adjustable Height
Position to select desired
cooking intensity
Gasmate Rotisserie uses
2x DD Batteries for hassle
free operation
Easy to t & remove wind guards
channel heat & minimise air movement
within the cooking zone
Up to 2 hot plates can still
be used when cooking
with the Rotisserie & wind
guards tted.

LIGHTING AND TENDING
WOOD FIRE
It is preferable to leave a small amount of ash in the bottom of the bowl between burns. Put
some dry tinder in the centre of your re pit. Tinder are the small sticks, twigs, and leaves used
to get the re burning.
Stack your kindling on top of the tinder in a “tepee” structure. Light your kindling.
As the kindling starts to catch and burn, place a layer of dry seasoned hardwood that is cut to
lengths no more than ¾ of the diameter of the bowl.
You will need to tend to the re by adding logs, or shifting them around for an ideal atmosphere.
BBQ HEAT BEADS, CHARCOAL AND BBQ BRIQUETTES
You may wish to use BBQ heat beads, charcoal or briquettes, particularly for cooking. The
quickest way to heat these is to use re lighters with a charcoal chimney starter.
Fill the Chimney Starter all the way to the top with charcoal, heat beads or BBQ Briquettes.
Position the lighter cubes (approximately 4) on the charcoal grate and light them. They will go
grey in colour (approx. 30mins) once ready to transfer to your Pit n Grill.
Alternatively, you can light up directly into your re pit. Pour sufcient Heat Beads, Briquettes or
Charcoal to cover cooking area with one layer, but arrange into a pyramid over 2 - 4 relighters
and light. Leave for approximately 40 minutes, or until they go grey, indicating that they are hot.
WARNING: Remember to always use protective gear and re tools when tending to the re.
Do NOT add kerosene, fuel, alcohol, lighter uid, or gasoline to relight or enhance an
existing re.
Extinguishing
Allow the re to burn itself out and coals and embers to no longer glow. Use a shovel to spread
the ashes and embers around evenly.
Do NOT use water to extinguish as this is dangerous and can cause hot water to spit. If the re
needs to be put out quickly we suggest using sand spread over the embers and ash to smother
any remaining re. Do not bury the re or it will continue to smoulder underground and can
eventually reignite. Alternate stirring the ashes and adding sand to cool the re.
Models: IXLPIT, IXLPITKIT, IXLPGKITDEL

CARE AND CLEANING
Models: IXLPIT, IXLPITKIT, IXLPGKITDEL
The Pit
Rain, snow, ice and the sun’s rays all take a heavy toll on a re pit, even those of the highest
quality. Made from mild-steel, and varying from 2.5mm to 5mm in thickness, our re pit is durable
and made to last.
The re pit has no seam-welds or joints in the design, thus making them solid in structure and
adverse to creating potential weak spots due to rust. There is little required care or maintenance
needed, however they are designed to weather and show signs of wear and tear.
Steel makes for a strong, durable re pit. Our re pits are designed to allow for natural rusting,
giving them a charming rustic appeal. If however, you are not going to use your Pit N Grill for an
extended period of time, to ensure longevity removing the ashes is very important as they are
very acidic and destructive to both metal and masonry. It is recommended to empty the ashes
periodically because the ashes can be corrosive to the re pit when wet. It will also help keep the
drain hole open.
If you wish to remove rust you can remove it easily with a stiff wire brush, wire wool or sandpaper.
After wiping off any dust, reapply a protective coating. You should nd what you need at most
home improvement stores, just make sure you choose a primer and paint that is specic to both
high temperature and metal.
The BBQ Grill and Flat Plates
New plates will have a thin factory coating that must be removed before rst use. Simply scrub in
hot soapy water, rinse & dry.
It’s important to always keep your Fire Pit’s grill or at plates well oiled, before and after cooking.
This will prevent rust! Before cooking on your Fire Pit for the rst time ensure you season your
cooking plates as per below.
Seasoning your grill and at plates
To prevent rust and make your plates easier to clean, season them properly before and after each
time you BBQ.
Coat all the surfaces of the grill and at plate with a high heat cooking oil (such as Canola or
Peanut oil). Wipe off any excess oil with a paper towel — the oil must coat the plates evenly.
Add plates to the Pit n Grill and allow to heat up – for 20 minutes or until the oil burns off or starts
smoking. The shiny nish should now be dark brown or bronze. The darker and more seasoned
the BBQ plates become, the hotter and more evenly they will cook.
Once the plates has cooled, put a light coat of oil on after each use. This will help prevent rusting.
Page 10

STORAGE
Models: IXLPIT, IXLPITKIT, IXLPGKITDEL
After use, clean and oil cooking plates and wrap in a clean cloth or hang off the ground on hooks
in the garage, shed or similar. Avoid storing cook plates in damp or wet conditions. Discolouration
of the steel plates is normal. The hottest part of your plate will be directly above the re. This will
be visible by the discolouration of the plate in this area.
After being stored for a while, small spots of surface rust can appear. This is normal and will not
damage your cooking plates. Before using them, simply run some steel wool over these spots to
remove them. Then cook as normal, and enjoy your re pit!
Storage
Rainwater will not damage these robust re pits, so they can be left outdoors to the elements,
however if you wish for them to retain their appearance it may be preferable to store them in a dry,
undercover shed, garage or similar.
If you do not use a cover, store this outdoor re pit in a dry location to maximize product life when
not in use for long periods.
We recommend storing the accessories: grill and at plates, rotisserie brackets, rotisserie (not
included), plate lifter, etc indoors or undercover, protected from the elements.

WARRANTY
Models: IXLPIT, IXLPITKIT, IXLPGKITDEL
Two Year Warranty
This Warranty against defects for your newly purchased IXL Pit n Grill re pit is proudly pre-
pared by IXL Home Pty Ltd of 1/391 Boundary Rd, Truganina, VIC 3029,
phone [phone].
1.IXL Fire Pits come with guarantees that do not exclude the following consumer entitlements
under the Australian Consumer Law and New Zealand Consumer Law:
a. replacement or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage; and
b. to have the goods replaced if goods fail to be of acceptable quality and the failure
does not amount to a major failure.
2. IXL Home warrants that your product and related supply will be free from defects
in materials and workmanship during the warranty term. Your warranty term is two
years commencing from the date of purchase.
3. Subject to Point 1, IXL Home will during the warranty term provide a repair or
replacement of an equivalent current model where the balance of the warranty period
from the original date of purchase will take effect.
4. To the fullest extent permitted by law and subject always to Point 1, IXL Home will
not be liable for:
a. any loss or damage arising from loss of use, loss of prots or revenue; or
b. for any indirect or consequential loss or damage resulting from any breach of this
warranty against defects.
5. Defective IXL Pit n Grill products may be repaired using refurbished parts or if required,
completely replaced by a refurbished product of the same type.
Limitations to Your IXL Home Warranty
6. Subject to Point 1, this Warranty:
a. will only be provided to the original purchaser where the original purchase was
made from a IXL Home Authorised Dealer or Reseller and proof of such
purchase can be presented at the time of service;
b. only applies to IXL Pit n Grill products purchased in Australia or New Zealand
from a IXL Home Authorised Dealer or Reseller;
c. will not apply where the defect in or failure of the product is attributable to misuse,
abuse, accident or non-observation of the manufacturer’s instructions. This product
must be used in accordance with the manufacturer’s instructions;
d. will not cover faults due to normal wear and tear with reasonable use nor
consumable components such as wood, lighters, lters etc;
e. will not cover any damages or problems caused to this product by natural forces
e.g. storm, re, ood, and earthquake; or by intrusion or accumulation (or both) of
foreign matters e.g. dust, soil, and moisture. IXL Home recommends that you take
out appropriate insurances to protect your product to this end;
Page 12

WARRANTY
Models: IXLPIT, IXLPITKIT, IXLPGKITDEL
f. will not apply if this product is used in an environment it is unsuitable for;
g. covers use of this product for domestic use only;
i. will not be restarted or extended upon replacement of the product or a part.
How to make a Claim under Your IXL Home Warranty
7. To make a claim under this Warranty you will need to:
a. contact IXL Home service department on 1300 727 421 or [email protected] to
provide details and register your claim enabling a IXL Home assessment;
b. submit proof of purchase with your claim e.g. tax invoice or purchase receipt;
8. IXL Home will contact you to make arrangements for a replacement product, if applicable.
9. Subject to Point 1, you will be responsible for any costs relating to the provision of your
product to a IXL Home Authorised Service Dealer.
10. Subject to Point 1, in the event you live more than 50Km from a IXL Home Authorised Service
Dealer you may be subject to travel or transport costs to facilitate the repairing or replacement of
your IXL product.
11. IXL Home and its Authorised Service Dealers reserve the right to seek reimbursement of any
costs incurred by them should your product be found to be in good working order.
Privacy
The privacy of your personal information has always been important to us. To learn more about
how we collect, keep and use your personal information, please obtain a copy of our privacy
statement by visiting our website at www.ixlhome.com.au or by contacting us via the below contact
details.
Contact Details
Manufactured and distributed by:
IXL Home (AU)
1/391 Boundary Road Truganina VIC 3029
T 1300 727 421
F 1300 727 425
E [email protected]
W ixlappliances.com.au
IXL Home (NZ)
T 0800 727 421
E [email protected]
W ixlappliances.co.nz

AUSTRALIA
1/391 Boundary Road Truganina VIC 3029
T1300 727 421
F1300 727 425
E[email protected]
Wixlappliances.com.au
NEW ZEALAND
T0800 727 421
E[email protected]
Wixlappliances.co.nz
Distributed by
The Home of Premium Brands