7
• It is not recommended to use the appliance in the bathroom.
• Styling products (mousse, hairspray) contain flammable material. Do not
spray your hair while using the appliance.
• Before using it on artificial hair, always consult their distributor.
• To avoid burns, do not touch the plates or the outer part, when the plates
are still hot.
• Keep the heated parts away from the head, face, neck and hands.
• Never let the power unit, cord or plug get wet. If the appliance does get
wet, immediately remove the power cord from the wall outlet and do not
put your hands in the water. Never run the wet appliance and contact one
of the authorized BENRUBI service centers.
• Never leave the power cable wrapped during use. Unwind it completely.
• Never wrap the cord around the appliance.
• Never carry or suspend the appliance by the cord.
• Do not touch the appliance with wet or damp hands.
• Do not use an extension power cord.
• Check the power cord periodically for possible damages. If the power
cord or the plug of the appliance has been damaged, do not use the
appliance and contact an authorized BENRUBI Service Center.
• In case of a possible damage, do not attempt to repair the appliance by
yourself. Please contact one of the authorized BENRUBI service centers.
• WARNING: The polyethylene bags over the product or its packaging ma
be dangerous. Please keep them out of the reach of babies and children.
Never use them in cribs, children's beds etc. The thin film may cling to the
nose and mouth and prevent breathing. A bag is not a toy.
• Never place the appliance no a combustible surface, such as a bed,
couch, paper, plastic or any material sensitive to heat.
• Never operate the appliance while sleeping.
• To avoid the risk of electric shock, this tool is only to be used on dry hair,
not for wet or damp hair.
• Always place the appliance on a heat-resistant, stable, flat surface.
• Any repair made by a non-unauthorized BENRUBI Service Center
CANCELS THE GUARANTEE.
• Any misuse of the device cancels the warranty.
• The appliance conforms to EU directive 2014/30/EU on Electromagnetic
Compatibility, the 2014/35/EU Low Voltage Directive, and the 2011/65/EU
RoHS Directive, and the directive 2009/125/EC for eco-design.
SAVE THESE INSTRUCTIONS