J.Burrows MS250 User manual

INSTRUCTION MANUAL
WIRELESS MOUSE
MS250
Compatible with:
Windows®8 or later
Mac OS X 10.10 or later
iOS 13 or later
AndroidTM OS 5.0 or later
1/6
OFFICEWORKS LTD
236-262 EAST BOUNDARY RD
EAST BENTLEIGH VIC 3165 AUSTRALIA

Multi device mouse connects up to two devices either via
Bluetooth or via the included pre-paired USB receiver.
1.To install the battery, open the battery cover and insert
1 x AA battery into the mouse.
Model
1.5V AA
Dimensions
Resolution
108 x 61 x 37 mm
800/1200/1600DPI switching
MS250
Officeworks Product Code JBS1123EMS
2. Insert the USB nano receiver (stored inside the mouse) into
your computer's USB port.
2/6

3 .Turn the power on, your device will connect to the mouse.
3/6
4.Bluetooth Pairing
2).Press the device switch/Bluetooth
connection button to select Bluetooth mode
(indicator in green light flashes 5 times).
Press and hold the deviceswitch/Bluetooth
connection button to enter pairing mode,
the Bluetooth mode indicator in green light
will flash.
1).Turn on the mouse.
3).Click the “Bluetooth devices”
button in the computer (Windows)
settings.
Bluetooth Mode
(indicator in green light)
Device Switch/Bluetooth Connection Button
USB Receiver
USB Receiver Mode
(indicator in red light)
Battery Bay
On/Off

5. Easy Switch between Two Devices
This mouse can connect up to two devices either via
Bluetooth or via the included pre-paired USB receiver.
Press the device switch/Bluetooth connection button to switch
the mouse into USB receiver mode (indicator in red light)
or Bluetooth mode (indicator in green light flashes 5 times).
4/6
6).When the Bluetooth “MS250” is
connected, the mouse can be used
normally.
4).Click the “Add or remove Bluetooth
devices” button.
5).Select “MS250”, and click Pair button.
9).If installed completely,the mouse can
be used normally.
7).Mac OS System
Please follow the Bluetooth installation
steps (1~2) before pairing.
Go to "System preferences" and then select
the "Bluetooth" option.
8).Select "MS250" and press Pair.
MS250
MS250
MS250
MS250

Forward
Back
DPI Switch
Forward and back buttons only work in Windows
system, and will not function in Mac OS.
.
7. If no keys are pressed on the mouse within a period of 8
minutes, the mouse will automatically go into sleep mode.
To “wake up” the mouse from sleep mode, press any key.
Please note: Moving the mouse will not wake up the mouse.
The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Officeworks Ltd is under license.
Windows is a trademark of the Microsoft Corporation in the United States and
other countries.
Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other
countries.
AndroidTM is a trademark of Google LLC.
IOS is a trademark or registered trademark of Cisco in the U.S. and other countries
and is used under license.
6.The initial DPI is 1200, to adjust the DPI setting press the
DPI button.
5/6
between

6/6
3 years