J-TECH EX-HDBT-219 User manual

JTECH-EX-HDBT-219
HDMI2.0 HDbaseT Extender
131ft/40m 4K/60Hz (4:4:4)
All Rights Reserved
Version: JTECH-EX-HDBT-219_2017V1.0
User Manual

JTECH-EX-HDBT-219
J-Tech Digital, Inc. 1-888-610-2818 [e-mail] 1
Statement
Read this user manual carefully before using this product. Pictures shown in this manual are for reference
only, different model and specifications are subject to real product. This manual is only for operation
instruction only, not for any maintenance usage. In the constant effort to improve our product, we reserve
the right to make functions or parameters changes without notice or obligation. Please refer to our dealers
for the latest details.
Safety Precaution
To insure the best from the product, please read all instructions carefully before using the device. Save
this manual for further reference.
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
Do not dismantle the housing or modify the module, to avoid electrical shock or burn.
Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or
malfunction.
Do not expose the unit to rain, moisture or install this product near water.
Install the device in a place with plenty of ventilation.
Do not twist or pull, the ends of the cable, by force. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit.Always unplug the power to the device before
cleaning.
Unplug the power cord when not used for extended periods of time.
Refer all servicing to qualified service personnel.
After-sales Service
We provide limited warranty for the product within one year of purchase and lifetime technical support, for
the life of the product.
Package List
▪1 x Transmitter
▪1 x Receiver
▪4 x Mounting Ears & 4 x Screws
▪8 x Plastic Cushions
▪2 x 3-pin Phoenix Connector
▪1 x Power Adaptor (12VDC, 2A)
▪1 x User Manual
Introduction
The JTECH-EX-HDBT-219 is an ultra-thin HDMI2.0 extender that uses the latest HDbaseT standards. It
extends 1080p/4K HDMI signal up to 70m/40m (respectively), over CAT5e/CAT6a cable. Transmit IR and
RS232 pass-through to control source or display device remotely. It also utilizes a visually lossless video
compression technology (VLC) to ensure a HD lossless transmission of HDR and 4K@60Hz/4:4:4 over
CAT5e/CAT6a cable.

JTECH-EX-HDBT-219
J-Tech Digital, Inc. 1-888-610-2818 [e-mail] 2
Features
▪Supports 4K/UHD/60Hz/4:4:4.
▪Supports HDMI2.0 & HDCP2.2, and is backward compatible with HDCP 1.4.
▪Maximum transmission distance is up to 131ft (40m) for 4Kx2K, and 229ft (70m) for 1080p.
▪Supports CEC, IR and RS232 pass-through for long-distance control.
▪Power the extenders from either the transmitter or the receiver with bi-directional PoC, for simplified
wiring.
▪Supports HDR.
▪Features DIP switch for choosing mode from: Control, UpdateA, Update B.
Panel Description
Transmitter
Receiver
No.
Name
Description
①
MODE Switcher
▪CTRL: RS232 pass-through control mode.
▪UPDATEA: Update Valens IC program, connect a PC to the
RS232 port, and then double-click the update file (.bat).
▪UPDATE B: Update compression IC program, the upgrade
method is the same as the above UPDATE A.
②
Power LED
RED: DC power present.
③
HDMI IN (Transmitter)
Connect with HDMI source.
HDMI OUT(Receiver)
Connect with HDMI display.
④
3-pin Terminal Block
Send serial commands using the RS-232 protocol.
⑤
IR IN
Connect IR IN (Rx) cable to receive IR commands from your
controller.
⑥
IR OUT
Connect IR OUT (Tx) cable to transmit IR commands to your device.
⑦
HDBT OUT(Transmitter)
Connect to the HDBT IN socket on Receiver via CAT5e/6a cable.
HDBT IN (Receiver)
Connect to the HDBT OUT socket on Transmitter CAT5e/6a cable.
⑧
DC 12V Power Port
Supports bi-directional PoC, either extender power ports should be
connected with the supplied 12VDC 2A power adapter.
CTRL
UPDATE B UPDATE A
Tx Rx DC 12V
IROUT IRIN
HDBT OUT
HDMIIN
12345678
CTRL
UPDATE B UPDATE A
DC 12V
Tx Rx HDMIOUT
HDBT IN
IROUT
IRIN
12345678

JTECH-EX-HDBT-219
J-Tech Digital, Inc. 1-888-610-2818 [e-mail] 3
Specification
Model
Spec
Transmitter
Receiver
Input
HDMI IN
HDBT IN
Output
HDBT OUT
HDMI OUT
Control Ports
IR IN, IR OUT, RS232
IR IN, IR OUT, RS232
General
Transmission Mode & Distance
HDBaseT; 1080p ≤229ft (70m); 4K×2K ≤131ft (40m)
Resolution
Up to 4K×2K@60Hz 4:4:4
Bandwidth
18Gbps
HDMI Standard
HDMI2.0 & HDCP2.2
Power Consumption
14W (max)
Operation Temperature
0 ~ +40℃(0°~+104℉)
Storage Temperature
-10 ~ +50℃(-14°~+122℉)
Relative Humidity
0% ~ 90%
External Power Supply
Input: 100VAC~240VAC, 50/60Hz; Output: 12VDC 2A
Dimension (W*H*D)
115mm x 16 mm x 84mm (4.53in x 0.63in x 3.31in)
Net Weight (g)
Transmitter: 150g (5.3oz); Receiver: 153g (5.4oz)
System Diagram
IR Emitter
4K Blu-Ray Laptop
TV Remote
IR Receiver
Transmitter Receiver
IR Emitter
HDTV
Blu-Ray
Remote
IR Receiver
HDMI:
IR:
RS232:
CATx:
Power:
4K 40m ,1080P 70m
PoC