j5 create JEE351 User manual

3.5" SATA to USB 3.0 External
Hard Drive Enclosure
JEE351
DC-IN Port ( 12V/1.5A)
Power Switch
LED
USB 3.0 Type B Port
System Requirements
• Microsoft Windows 8.1/ 8/ 7/ Vista/ XP/2000
(32-bit or 64-bit) Windows Server compatible
• Mac OS X
• Linux OS
• Available USB port (USB 3.0 is recommended)
Mac Windows Linux Compatible

Setup
3-2 3-33-1
2-1 2-2
1. Unscrew the screw and slide the aluminum cover to open.
2. Carefully install the 3.5” SATA hard drive into the enclosure.
**Once the 3.5" SATA hard drive is assembled, it is highly recommended that it not
be disassembled. Any damage that occurs during disassembly is not covered
under the warranty.
STOP!! If you have any issues using this
product, please try the instructions
below before returning the product
to the store.
1. The User Manual
Contains detailed instructions and a troubleshooting section, many common issues can be easily
resolved by reading the user manual.
2. Online Support
Please visit the j5create website (www.j5create.com) to find the latest software for your device. If you
are still experiencing issues, you can submit a trouble ticket through our j5 web support. Your ticket
will be responded to within 24 hours.
3. Telephone Support
Please call us @ [phone] and one of our support technicians will be very happy to assist
you.We stand behind our products and it is our goal to provide you with world class support.
TECHNICAL SUPPORT
Toll free number : [phone]
Business Hours : Mon. – Fri. 10:00 a.m – 7:00 p.m E.S.T
Email: ser[email protected]
3. Slide the aluminum cover back on and fasten the screw.
V2