Jabra Elite Sport User manual

How do I pair my Jabra Elite Sport with my mobile device?
Jabra Elite Sport (Upgrade)
To pair with your mobile device for the first time, follow these steps.
1. Remove Jabra Elite Sport from the box and place the earbuds in the
charging case.
2. Turn on the Bluetooth setting on your mobile device.
3. To enter pairing mode, remove the earbuds from the charging case. The
earbuds will automatically turn on and enter pairing mode.
4. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra Elite Sport from the list of available devices. Alternatively, wear
the earbuds to hear the pairing instructions.
Enter “0000” (four zeros) if you are asked for a PIN.
To re-pair with your mobile device or pair with an additional mobile
device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Start with the earbuds turned off and in your hands (not in the charging
case).
Turn off the earbuds by pressing and holding the Multi-function button
on the right earbud until the LED flashes.
06/04/2021 21:33
https://www.jabra.in/supportpages/jabra-elite-sport/100-98600001-40/faq/a85c70bf-ce07-
443f-bc60-585da058f6ff
Page 1 of 2

3. To enter pairing mode, press and hold (3 seconds) the Multi-function
button until the LED flashes blue.
The earbuds are now ready to pair with your mobile device.
4. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra Elite Sport from the list of available devices. Alternatively, wear
the earbuds to hear the pairing instructions.
Enter “0000” (four zeros) if you are asked for a PIN.
Note
If pairing is not successful, try the pairing steps again, or try pairing with a
different Bluetooth device. For troubleshooting tips, see here.
Optionally, try using the Bluetooth Pairing Guide which provides detailed
steps for pairing with a mobile device.
06/04/2021 21:33
https://www.jabra.in/supportpages/jabra-elite-sport/100-98600001-40/faq/a85c70bf-ce07-
443f-bc60-585da058f6ff
Page 2 of 2