Jabra Talk 45 User manual

User manual
Jabra
Talk 45

2
ENGLISH
1. WELCOME......................................3
2. HEADSET OVERVIEW.................4
3. HOW TO WEAR ............................5
3.1 CHANGE EARGELS
3.2 ATTACHING THE EARHOOK
4. HOW TO CHARGE THE
BATTERY.........................................7
5. HOW TO CONNECT ....................8
5.1 CONNECT TO MOBILE DEVICE
5.2 CONNECT TO MOBILE DEVICE (NFC)
6. HOW TO USE ............................ 10
6.1 MULTIPLE CALL HANDLING
7. SUPPORT .................................... 12
7.1 FAQ
7.2 HOW TO CARE FOR YOUR HEADSET

3
ENGLISH
1. WELCOME
Thank you for using the Jabra Talk 45. We hope
you will enjoy it!
JABRA TALK 45 FEATURES
Clear calls - HD voice (phone and network
dependent) and two microphones
Noise cancelling - advanced technology for
clear, noise-free calls
Long lasting - up to 6 hours of calls, and up to
8 days of standby time
Stream from your phone - music, podcasts
and GPS directions
Voice Control - dedicated button for Siri®and
Google Assistant™

4
ENGLISH
2. HEADSET
OVERVIEW
Answer/end
button
Bluetooth
Indicator
On/o
switch
Microphones
USB charging port
Voice button
NFC Zone
EargelsUSB cable Earhooks
Car charger

5
ENGLISH
3. HOW TO WEAR
The headset can be worn with or without the
earhook, on the left or right ear. Additional
earhooks and eargels are available in the pack.
3.1 CHANGE EARGELS
Choose between different ergo-designed
eargels for optimal fit and comfort.

6
ENGLISH
3.2 ATTACHING THE EARHOOK
The earhook can be attached to the headset if
the earhook fit is preferred.

7
ENGLISH
4. HOW TO CHARGE
THE BATTERY
1. Pull back the charging cover on the headset
to expose the USB charging port.
2. Connect the headset to a USB port using the
USB cable.
NNOTEOTE:For safety reasons, it is recommended not to use the
headset while it is charging.
It takes approx. 2 hours to fully charge the
headset.

8
ENGLISH
5. HOW TO CONNECT
5.1 CONNECT TO MOBILE DEVICE
1. Turn the headset on (set the On/offOn/off switch to
the On position).
2. Press and hold (3 secs) the Answer/endAnswer/end
button until the Bluetooth indicator flashes
blue, and pairing mode is announced in the
headset.
3. Follow the voice-guided pairing instructions
to pair to your Bluetooth device.

9
ENGLISH
5.2 CONNECT TO MOBILE DEVICE
NFC
1. Ensure that NFC is enabled on your mobile
device.
2. Slowly slide the NFC zone of the headset
against the NFC zone of the mobile device
until a connection is confirmed.

10
ENGLISH
6. HOW TO USE
Answer/end button
Voice button
On/o switch
FUNCTION ACTION
On/O Slide the On/oOn/o switch
Answer/end
call
Tap the Answer/endAnswer/end button, or
say ‘Answer’
Reject call Double-tap the Answer/endAnswer/end
button, or say ‘Ignore’
Redial last
number
Double-tap the Answer/endAnswer/end
button when not on a call
Activate
voice controls
(phone
dependent)
Tap the VoiceVoice button for voice
dialing (e.g. Siri/Google Now).
Press and hold (1 sec) the VoiceVoice
button for voice commands
Mute/unmute Tap the VoiceVoice button when on
a call