Jabra Talk 30 User manual

User manual
Talk 30
Jabra

2
ENGLISH
1. Welcome.........................................3
2. Jabra Talk 30 overview................4
2.1 Included accessories
3. How to wear...................................5
3.1 Attaching the EarGels
4. How to charge...............................7
4.1 What the LEDs mean
4.2 Power Nap
5. How to pair.....................................9
5.1 Pairing with a smartphone
5.2 Pairing with a smartphone using NFC
6. How to use ................................. 11
6.1 Calls
6.2 Automatic volume control
6.3 Voice assistant
6.4 Multiple call handling
6.5 How to reset
7. Jabra Assist app ......................... 15
8. Support ........................................ 16
8.1 FAQ
8.2 How to care for your headset

3
ENGLISH
1. Welcome
Thank you for using the Jabra Talk 30. We hope
you will enjoy it!
Jabra Talk 30 features
• Voice guidance
• Long talk time - up to 5 hours (smartphone
dependent)
• Wireless freedom - up to 10m/33ft
• Battery and pairing status display
• HD Voice
• Power Nap for extended standby time up to
180 days (smartphone dependent)
• NFC for easy pairing

4
ENGLISH
2. Jabra Talk 30
overview
2.1 Included accessories
USB cable Looped EarGel
Bluetooth LED
Battery LED
O/On/Pairing
switch
Micro-USB
charging port
Answer/End
call
NFC zone

5
ENGLISH
3. How to wear
The Jabra Talk 30 can be worn on either the
left or the right ear.
To switch ear:
1. Remove the attached EarHook.
2. Flip the headset and re-insert the Earhook.
3. Adjust the height of the Earhook up or down
for the best fit.

6
ENGLISH
3.1 Attaching the EarGels
For the optimal audio experience, it is
recommended to try each of the EarGel shapes.
The fit should feel secure in your ear. Ensure
the EarGel is firmly attached.
To change EarGel:
1. Remove the attached EarGel using your
fingernail (as illustrated).
2. Attach the new Eargel and ensure it clicks
into place.

7
ENGLISH
4. How to charge
It is recommended to charge the headset using
the supplied USB charging cable. It takes
approx. 2 hours to fully charge the battery.
Note: Always clean and dry the USB charging port before
charging the headset. It is recommended to recharge the
headset at least once a month. For safety reasons, it is
recommended not to use the headset while it is charging.
4.1 What the LEDs mean
BATTERY LED
Power on/o
High battery/Charging
Low battery
BLUETOOTH LED
Pairing
Connected

8
ENGLISH
4.2 Power Nap
To extend standby time the headset will
automatically enter Power Nap mode when
the headset is out of range of your connected
mobile device for more than 1 hour. Power Nap
provides up to 180 days of battery readiness/
standby time.
To exit Power Nap simply turn off and turn on
the headset. Your Smartphone must be
switched on, within range, and have Bluetooth
enabled.

9
ENGLISH
5. How to pair
5.1 Pairing with a smartphone
1. Press and hold (3 sec.) the Off/On/Pairing
switch in the pairing position. The Bluetooth
LED will flash blue.
2. Turn on Bluetooth on your smartphone and
select Jabra Talk 30 from the list of available
Bluetooth devices.
3 sec.
Jabra Talk 30

10
ENGLISH
5.2 Pairing with a smartphone using
NFC
1. Power on the headset.
2. Ensure NFC is enabled on your smartphone.
3. Touch the NFC zone on the headset against
the NFC zone on your smartphone until a
connection is confirmed.
NFC zone