Jackson Systems Wireless Comfort WCT-32 User manual

User Manual
Model WCT-32
Wireless
COMF RTTM
Made in the USA
Inside
Mo
Schedule Day
AM
AUTO
Set To
Heat
MENU HOLD NEXT ENTER
Up and Down keys used when
adjusting temperature, time of day,
day of the week, program start times
and other options
SYSTEM key selects Heat, Cool,
Auto Heat/Cool, Off and
Emergency Heating for a
heat pump application
Fan key selects Auto or
Cont fan operation
Temperature Setting
Space temperature
Indicates Morn, Day, Eve
or Night schedule
Indicates the Schedule, Hold or
Permanent Hold mode
Menu key used to set time of
day, daily schedule, calibrate
temperature sensor and
display schedule.
Hold key used to switch
between Schedule and
Permanent H operation
Next key used when setting
time of day and schedules
Battery compartment, 2 AA batteries.
Enter key used when setting
time of day and schedules
SYSTEM
FAN
SYSTEM
FAN
Improved Comfort
Energy Savings
Your wireless thermostat provides automatic control
of the temperature. You can set separate
temperatures for heating and cooling for four time
periods per day (morning, daytime, evening and
night). Or you can operate the thermostat without
using the schedule feature (Permanent Hold mode).
The schedule feature can save you energy by
reducing the heating and cooling at night and during
the daytime when you are away.

Factory Schedule
Warning!
The thermostat is shipped with the following
factory schedule.
The thermostat is battery powered and the
batteries should be changed every year or when
the low battery warning is displayed.
Morning
Day 8:00AM
Evening
Night
6:00AM
5:00PM
10:00PM
70F
62F
70F
62F
Heating
78F
82F
78F
82F
Cooling
Selecting System
Off, Auto, Heat, Cool or EM HT
Selecting Fan
Auto or Cont
Press the System key to select Off, Auto
(heating and cooling) Heat (heating), Cool
(cooling) or EM HT (emergency heating if your
system is a heat pump).
In Auto the thermostat will call for heating or
cooling based on the heating and cooling set
temperatures and the indoor temperature. To view
both the heating and cooling set temperature in
Auto mode, press and hold the NEXT key. The
LCD will display Heat Set To and then Cool Set
To along with with the corresponding set
temperature. Use the Up and DOWN keys to
change the set temperature when the proper
mode is displayed.
Press the Fan key to select Auto or Cont
(continuous) fan operation. In Auto the
thermostat activates the fan during heating and
cooling calls. In Cont the fan runs continuously
to circulate air.
Inside
Inside
Th
Th
AM
AM
HEAT
HEAT
Set To
Set To
MENU
MENU
HOLD
HOLD
NEXT
NEXT
ENTER
ENTER
System
Mode
Fan
Mode
AUTO
AUTO
Heat
Selecting Schedule or
Permanent Hold
Press the Hold key to switch between Hold,
Hold Permanent and Schedule. Schedule
operation automatically changes the heating
and cooling temperature settings at the four
scheduled times– Morning, Day, Evening and
Night.
When in Schedule operation, adjusting the
heating or cooling temperature using the Up
and Down keys switches to the Hold mode.
After 3 hours the thermostat returns to the
Schedule mode. Press the Hold key at any
time to return to Schedule mode.
The Hold Permanent mode maintains the
heating and cooling temperatures indefinitely
until the Hold key is pressed which will return
the thermostat to the Schedule operation.
Inside
Schedule Day
Th
AM
AUTO
HEAT
Set To
MENU HOLD NEXT ENTER
Schedule
Mode in
Day
Schedule
HOLD Key
Heat
Program Start Time Setpoint
Setting the Heating and
Cooling Temperature
Press the Up or Down key to change the heating
or cooling temperature. Press the Next key to
switch between the heating and cooling
temperature.
2

Inside
Schedule Day
Th
AM
AUTO
HEAT
Set To
MENU HOLD NEXT ENTER
Cool
Schedule
Mode in
Day
Schedule
NEXT Key
Setting the Time
and Day
To set the time of day and the day of the week,
press the MENU key and the LCD will display
the hour. Use the Up and Down keys to set the
hour. Make sure that the AM or PM is correct.
Press the NEXT key to set the minute. Use the
Up and Down keys to set the minute.
Press the NEXT key to set the current day of
the week. Use the Up and Down keys to select
the day of the week and press the ENTER key.
Th
AM
Changing the Schedule
Press the MENU key twice until the LCD
displays the schedule screen shown below with
the current day of the week. Press and hold the
Up or Down key to change the morning (Morn)
schedule start time.
Schedule Morn
AM
MENU CANCEL NEXT
3
CANCEL NEXT ENTER
Press the NEXT key to display the morning
heating (Heat) temperature. Use the Up or
Down keys to change the temperature.
Press the NEXT key to display the morning
Cooling (Cool) temperature. Use the Up or
Down keys to change the temperature.
Schedule
Schedule
Morn
Morn
AM
AM
Heat
Cool
Set To
Set To
CANCEL
CANCEL
NEXT
NEXT
PM
Mo
Schedule Night
CANCEL NEXT ENTER
Mo (Monday) will appear on the LCD.
Continue to press the NEXT key to add
additional days of the week. Use the Up
and Down keys to turn days ON or OFF.
The schedule will be applied to the days
that are ON.
Continue using the NEXT key and the Up and
Down keys to set the start time, heating
temperature and cooling temperature for the
Day, Evening and Night schedules.
After the Night schedule is completed, you can
press the ENTER key which will only save the
schedule for the current day or you can
apply the same schedule to other days of the
week by pressing the NEXT key.
Th
Th
Th

5418 Elmwood Avenue, Indianapolis, IN 46203-6025
06-1056-042810
These days will be displayed on the thermostat.
The example below shows a schedule being
applied to Monday through Friday.
PM
Mo
Schedule
Tu We Th Fr
CANCEL NEXT ENTER
Pressing the ENTER key will copy and save the
schedule for the days of the week selected. After
the ENTER key is pressed, the thermostat will
return to normal operation To change the
schedule for other days of the week, repeat the
same programming steps.
4
Sa Su
CANCEL NEXT ENTER
Low Battery
Indication
If the battery voltage drops to where it could
interfere with reliable operation, the LCD will
alternately display Lo in place of the Inside
temperature. Replace batteries immediately.
Inside
Day
Th
AM
Heat
AUTO
Set To
MENU HOLD NEXT ENTER
Schedule
Reviewing the Time and
Temperature Schedule
Press the MENU key 4 times until the first
schedule is displayed as shown below. The
display will show the Monday morning scheduled
start time and heating temperature. setting.
Continuing pressing the NEXT key to display the
morning, day, evening and night schedule along
with the heating and cooling temperatures for
each day of the week. Press the CANCEL key
at any time to exit and return the thermostat to
normal operation.
Mo
Schedule Morn
AM
Heat
Set To
CANCEL NEXT
All rights reserved.
©Jackson Systems, LLC 2010
Intellectual rights apply.
After the Night schedule is completed, press the
next key and Mo (Monday) will appear on the
LCD. Continue to press the NEXT key and use
the Up and Down keys to turn days ON or OFF.
The schedule will be applied to the days that are
ON. In the example above, Sa (Saturday) and
Su (Sunday) have been selected. To save the
schedule, press the ENTER key and the
thermostat will resume normal operation. Each
day of the week can have a separate schedule if
required. Just program the schedule and select
the day then press the ENTER key.
Schedule Morn
AM
Night