Jacuzzi Opalia 9635 User manual

opalia™whirlpool bath and soaking bath
ops—the roman goddess of abundance. opalia—the day to celebrate life’s bounty: beauty, luxury, wealth of all kinds.
Detail: The Opalia™ whirlpool bath features deep
dimensions—for deepest relaxation—and classic
detailing appropriate for most any décor.
The Opalia™ whirlpool bath. Celebrate life,
renewal honor indulgence here.
features:
• 4 fully adjustable TheraPro™ jets
• 2 directionally adjustable AccuPro™ jets
• Sculpted armrest and contoured backrest
• Electronic on/off controls
• Drain included on whirlpool baths
opalia™ whirlpool bath
model number: BN00 (RH pump),
BN05 – (LH pump)
exterior dimensions:
72" long x 44" wide x 22¼" high
interior dimensions (at bottom):
47" long x 28" wide
# of Jets/type of Jets:
4 TheraPro™Jets
2 AccuPro™ Back Jets
operating gallons:
70 gallons
opalia™ soaking bath
model number: 9635
exterior dimensions:
72" long x 44" wide x 22¼" high
interior dimensions:
47" long x 28" wide

Opalia™ Whirlpool Bath
Model: BN00, BN05
Opalia™ Bath
Model: 9635
Installation Notes
Refer to installation instructions included with fixture before beginning installation.
Please confirm product availability and specifications before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Electrical Components and Electrical Specifications do not apply to non-jetted baths.
Ordering Information
Product Code:
BN05 Opalia™ Whirlpool Bath
Left Hand
BN00 Opalia™ Whirlpool Bath
Right Hand
9635 Opalia™ Bath
• Center Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit #X559
Rotary Drain Kit, 26” Cable #8730
Trim Kit: 2 BMH Jet Rings #J869
Trim kit: 4 HTC Jet Rings #D095
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
Technical Specifications
Dimensions
72” L x 44” W x 22-1/4” H
(1829 mm) L x (1118 mm) W x (565 mm) H
Drain/Overflow
A: 18-3/4” (476 mm) B: 12” (305 mm)
Cutout
Template Provided P/N P186000
Total Weight
BN00: 978 lb (445 kg) / 45 lb/sq. ft. (217 kg/m2)
BN05: 945 lb (429 kg) / 45 lb/sq. ft. (217 kg/m2)
9635: 945 lb (429 kg) / 43 lb/sq. ft. (210 kg/m2)
Operating Gallonage
70 U.S. Gal. (265 Liters)
Product Weight
BN00, BN05: 145 lb (66 kg)
9635: 112 lb (51 kg)
Skirt Mounting
Not Available
Electrical Specifications Models BN00, BN05 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
Heater (Optional) Models BN00, BN05 only
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
4" 36"
44"
32"
12"
3"
72"
13" X 4"
Motor
12" H x 18" L
Service Access
4-11/16"
© Jacuzzi Whirlpool Bath • 14801 Quorum Drive • Dallas • Texas • 75254 • www.jacuzzi.com
END VIEW
H
W
SIDE VIEW
L
2"
#FS04 12/06
DRAIN/OVERFLOW
A
B
Product Shown: Opalia™ Whirlpool Bath Left Hand Shown Model: BN05
* Measurements inside unit represent cutout in floor to allow for drain/overflow.