
Capella® Space Saver Corner Whirlpool Bath w/Integral Skirt
Model: U950
Capella® Space Saver Corner Bath with Integral Skirt
Model: U960
Installation Notes
Refer to installation instructions included with fixture before beginning installation.
Please confirm product availability and specifications before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Electrical Components and Electrical Specifications do not apply to non-jetted baths.
Ordering Information
Product Code:
U960 Capella® 60 Space Saver
Corner Bath w/Integral Skirt
U950 Capella® 60 Space Saver
Corner Bath Whirlpool w/
Integral Skirt Right Hand
• Center Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit: #X559
TheraPro™ Jet Rings Kit #D095
AccuPro™ Jet Rings Kit #P556
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
Technical Specifications
Dimensions
60” L x 60” L x 20-1/2” H
(1524 mm) L x (1524 mm) L x (520 mm) H
Drain/Overflow
A: 18” (457 mm) B: 12-3/8” (314 mm)
Cutout
Not Applicable
Total Weight
U950: 880 lb (399 kg) / 35 lb/sq. ft. (172 kg/m2)
U960: 855 lb (388 kg) / 34 lb/sq. ft. (167 kg/m2)
Operating Gallonage
60 U.S. Gal. (227 Liters)
Max. 90 U.S. Gal. (341 Liters)
Product Weight
U950: 130 lb (59 kg)
U960: 105 lb (48 kg)
Skirt Mounting
Integral
Electrical Specifications Model U950 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
Heater
Not available
25-1/4"
49"
25-1/4"
60"
41-9/16"
6"
60"
33-13/16"
14" X 4"*
33-13/16"
Motor
Service
Access
Opt.
Service
Access
90˚
90˚
© Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino • CA • 91710 • www.jacuzzi.com
1"
H
FRONT VIEW SIDE VIEW
#FQ91 06/07
Product Shown: Capella® 60 Space Saver Corner Whirlpool Bath Right Hand w/ Integral Skirt Model: U950
* Measurements inside unit represent cutout in floor to allow for drain/overflow.
Minimum Service Access dimensions given.
DRAIN/OVERFLOW
A
B