Jandy Pro Series Leaf Master 1142 User manual

1. Press bag ring into body as shown until snap is
heard. Use fi rm hand pressure; do not pound.
2. Leaf-Master wheels may be replaced simply by
pulling assembly fi rmly upward. Reverse procedure
to install new wheel assembly.
4. A full line of replacement parts and accessories
including an extra large bag and a fi ne mesh bag
are available at your local pool store. Be sure to ask
for genuine Jandy Pro Series replacement parts and
accessories by name.
3. Surface Skimming
Invert the Leaf-Master allowing the powerful water
jets to drive the Leaf-Master to the surface. Surface
skimming is accomplished by slightly tilting the unit to
the left or right as shown.
Leaf Master®
Assembly Instructions

Use of Leaf-Master
Attach the Leaf-Master to your pool pole and garden hose, place in pool and turn on water pressure. Leaf-Master
is easily maneuvered around the oor of the pool to pick up loose debris. For easier maneuverability, throw excess
garden hose into pool.
Emptying Collector Bag
The collector bag may be emptied by pushing bag back through the Leaf-Master throat. In most cases, there is no
need to remove the collector bag from the Leaf-Master to be emptied. However, if emptying the bag is required more
than once while cleaning the pool, the bag may be emptied by removing the bag from the Leaf-Master utilizing the
tie-release attachment on the bag.
Storing
When Leaf-Master is not in use, it is best to store it out of direct sunlight. The Brush Model should be stored with the
bristles up.
Zodiac Pool Systems, Inc.
2620 Commerce Way, Vista, CA 92081
1.800.822.7933 | www.Jandy.com
©2016 Zodiac Pool Systems, Inc. ZODIAC®is a registered trademark of Zodiac International, S.A.S.U., used
under license. All other trademarks referenced herein are the property of their respective owners.
1643 Rev B
Page 2 Jandy®Pro Series Leaf Master®|Assembly Instructions