baracuda Captura EM14 Series User manual

Read the Manual and all Safety Warnings
Before You Start
Cleaner Control Box
SURFACE CONTROL SYSTEM
12 34ROUGHSMOOTH
Select Cleaning Surface
•Floor
•Floor and Walls
Start/Stop
Cleaner
Cleaner
Error
Indicator
Surface Control System
(SCS) for wall cleaning
(rough to smooth surfaces)
LEDs indicating
pump strength
for SCS
Package Contents
Quick Start Guide
For complete operating instructions, please
download the manual from:
www.baracuda.com.au
For installation and troubleshooting questions,
please directly contact:
BARACUDA®After Sales Support: 1300 784 423
We have a trained team on hand to help walk
you through how toset up your cleaner and
equipment. Happy Swimming!
Zodiac Group Australia Pty Ltd
ABN 87 002 641 965
PO Box 7238
Wetherill Park NSW 2164 Australia
1300 784 423
www.baracuda.com.au
H0629200
REVA
©2015 BARACUDA®is a registered mark of Zodiac Group Australia Pty Ltd.
TYPE EM14--
TYPE EM15--
•

Start Cleaning
from Pool
Never turn on the cleaner unless it is fully submerged in the water. Doing so
will void the warranty and may cause severe damage tothe cleaner's motor.
Connect Floating Cable
Wait for bubbles to stop
completely, then let the
cleaner sink to the bottom of
the pool.
3.5m
Remove
"CLICK"
"CLICK"
"CLICK"
"CLICK"
1
2
Start the
Cleaner
SURFACE CONTROL SYSTEM
12 34ROUGH SMOOTH
Choose Cleaning
Surface
Floor Only
Floor and Walls
Check Wall Climbing (SCS) SURFACECONTROL SYSTEM
12 34ROUGH SMOOTH
SURFACE CONTROL SYSTEM
1 2 3 4ROUGH SMOOTH
Default
Setting
+
_
+
_
–
SURFACE CONTROL SYSTEM
1 2 3 4ROUGH SMOOTH
+
SURFACE CONTROL
1 2 3 4ROUGH
Cleaner should
reach waterline
1
2
3
Never lift the cleaner out of the pool by the floating
cable
Clean the Filter Canister
Unplug & Straighten
Any Kinks
Residual Current
Device 240V
minimum
Submerge in Pool