Janome AcuFil Assembly instructions

AcuFil Tips
AcuFil Allover Stippling
Perfect stippling is easily achieved with AcuFil.
1. Measure the area to be stippled. It is a good idea to not include the bor-
ders so there is enough fabric available to fit in the hoop while quilting. The
borders can be quilted separately with a continuous look design created with
the AcuFil Tool or with built in decorative stitches.
2. Open AcuFil tool and select AcuFil Multiple Design Layout.
3. Enter the measurement of the quilting area into the pop up window and
then click OK.
4. The layout will appear. Click Next.
5. The stippling design has automatically been sized to fit the quilt.
6. To Save the design click File > Save As. Navigate to your favorite folder,
name and then save the design. The AcuFil Tool automatically saves all
designs in the native format for the MC12000, *.jpx. This will allow you to
reopen and reedit the design as needed for future quilts.
7. Click Write to send the design to the machine or USB flash drive.
Templates
Perfect Placement is easy to achieve using Jenny Haskins Template
Magic a reusable self-adhesive paper ideal for printing templates
with an inkjet printer.
1. After calculating the AcuFil design, click File and then Print Pre-
view. AcuFil Tool will automatically print a full size template as well
as a layout guide.

AcuFil Tips
2. Print page 1 on Jenny Haskins
Template Magic.
3. Cut the template out close to
the edges of the design, peel off
the backing, and then stick the
template in place.
4. Place the quilt in the ASQ22
hoop. Remove the printed tem-
plate and quilt the first design.
5. Repeat the process for the rest
of the area to be quilted.

AcuFil Tips
Last Pattern
Due to the shifting of the fabric during the quilting process the design very
often will not fit the final space to be quilted.
1. Measure the height and width of the final space to be quilted.
2. Open AcuFil Tool and select Adjust Last Pattern Size.
3. From the Open window locate the .jpx file created to quilt the project.
4. Enter the new measurement in the Editing Size pop up window, and then
click OK. The design will automatically resize to fit the new measurement.
2. Enter in the size of the quilt block, keep in mind the maximum size of the
quilting area of the AQS22 hoop is 8.66 in/220mm.
3. Click Import Design to open a .jef,
.jef+, or .jpx design.
Navigate to the file the embroidery design
is saved in and open. It will automatically
be centered in the hoop.
Adding Quilting to an embroidered design
Quilting around an existing embroidery design is simple as 1-2-3.
1. Open the AcuFil Tool and select Edit Designs.
5. Print a new template and write the new
design to the machine or USB flash drive.

AcuFil Tips
4. Click Import Design
5. Select the centered embroi-
dery design and then delete it
from the hoop.
Print a template and then
write the design to the
machine or USB flash drive.
and navigate to the desired quilt
motif. The built in motifs will be found: C
Drive > Program Files(x86) > Janome >
AcuFil Tool > Design Collection > Stippling
Parts. Add quilting motifs to the hoop sur-
rounding the embroidery design.
Quilting a Sash or Border
Add visual interest to your quilt with sashing and borders quilted with
continuous look designs.
1. Measure the width and height of the sash or border; do not include
the corner stones these will be created with a different tool.
2. Open AcuFil Tool and select Create Original AcuFil Designs

AcuFil Tips
3. Enter in the width and height of the sash or border and then click
OK. Keep in mind the minimum is 3.94in/100mm and maximum
129.92in/3300mm. The layout for the area to be quilted will appear. (HINT:
if the sash is less than 3.94 wide just select motif that will fit the actual mea-
surement and use the template for placement.)
4. Click the Next Arrow
and one hoop area will appear.
5. Click Import Design
and navigate to the desired quilt
motif. The built in motifs will
be found: C Drive > Program
Files(x86) > Janome > AcuFil
Tool > Design Collection > Quilt-
ing Designs. The preview win-
dow will show the design as well
as the size, choose a design that
will fit in the quilting area defined
in step 3, and then click open.
6. Lay out the quilt motif as
desired, click next
and then print a template and write
the design to the machine or USB
flash drive.

AcuFil Tips
Add a Cornerstone to any Border
1. Measure the corner stone area.
2. Open AcuFil Tool and select Edit Designs
3. Enter in the measurement of the corner-
stone keeping in mind the minimum size is
3.94in/100mm, and then click OK; the quilt-
ing area will appear.
4. Click Import Design
and navigate to the desired quilt motif. The built in motifs will be found: C
Drive > Program Files(x86) > Janome > AcuFil Tool > Design Collection >
Stippling Designs. The preview window will show the design as well as the
size, choose a design that will fit in the quilting area defined in step 3, and
then click open.
5. Click Next
and then print a template and write the
design to the machine or USB flash drive.