JASHEN F16 Series User manual

Go online for a comprehensive walk through of your new purchase!
This guide features everything you need to get ready for first use, including setting up,
using and maintaining your machine, but join us online for a comprehensive walk
through. Our online support includes tips and troubleshooting, videos, product registra-
tion, parts and more. Go to jashen.com.

USER GUIDE 󾙓󾙘

CONTENTS
Important Safety Instructions ............................................................................4-6
Overview ................................................................................................................ 7
Accessories ............................................................................................................ 8
Assembly ................................................................................................................ 9
Operation .........................................................................................................10-14
Maintenance ....................................................................................................15-16
Specifications ...................................................................................................... 17
Troubleshooting .................................................................................................. 18
Warranty ..........................................................................................................19-20

IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING YOUR APPLIANCE.
When using an electrical appliance, basic precautions should be observed, including the
following:
WARNING
TO REDUCE THE RISK
OF FIRE, ELECTRIC
SHOCK, OR INJURY:
• Use indoors only.
• Do not allow it to be
used as a toy. Close
attention is necessary
when used by or near
children.
• Do not use for any
purpose other than
described in this user
guide. Use only the
manufacturer’s recom-
mended attachments.
• Do not charge with a
damaged cord or plug.
• Do not unplug by pulling
on the Docking Station
cord. Instead, to unplug,
grasp the charger, not the
cord.
• Do not handle Docking
Station, charging plug, or
appliance with wet hands.
• Do not put any object
into openings. Do not
use any opening blocked;
keep openings free of
dust, lint, hair, and
anything that may reduce
airflow.
• Keep hair, loose clothing,
fingers, and all body parts
away from openings and
moving parts of the
appliance and its
accessories.
• Use extra care when
cleaning on stairs.
• Do not use to pick up
flammable or combustible
materials (lighter fluid,
gasoline, kerosene, etc.)
or use in areas where they
may be present.
• Do not use the appliance
in an enclosed space
filled with vapors given off
by oil-based paint, paint
thinner, some
moth-proofing
substances, flammable
dust, or other explosive or
toxic vapors.
• Do not pick up toxic
material (chlorine bleach,
ammonia, drain cleaner,
etc.).
• Do not pick up anything
burning or smoking, such
as cigarettes, matches, or
hot ashes.
• Do not pick up hard or
sharp objects such as
glass, nails, screws, coins,
etc.
• Use only JASHEN®
cleaning products
intended for use with this
appliance to prevent
internal component
damage. See the
Cleaning Formulas
section of this guide.
• Do not carry the
appliance while in use.
• Do not immerse. Use
only on surfaces
moistened by the cleaning
process.
• Plastic film can be
dangerous. To avoid the
danger of suffocation,
keep away from babies
and children.
• Always connect to a
proper electrical socket.
• Keep cord away from
heated surfaces.
• Do notuse without filters
in place.
• Do not charge the unit
outdoors.
• Do not incinerate the
appliance even if it is
severely damaged. The
batteries can explode in a
fire.
• Use only with charger SIL,
Model SSC-420085US.
• Recharge appliance only
with the charger specified
by the manufacturer. A
charger suitable for one
type of battery pack may
create a risk of injury and
fire when used with
another battery pack.
www.jashen.com 4

• When the battery pack is
not in use, keep it away
from other metal objects,
like paper clips, coins,
keys, nails, screws, or
other small metal objects,
that can make a connec
tion from one terminal to
another. Shorting the
battery terminals together
may cause burns or a fire.
• Do not immerse in water
or liquid.
• Do notuse a battery pack
or appliance that is
damaged or modified.
Damaged or modified
batteries may exhibit
unpredictable behavior
resulting in fire, explosion,
or risk of injury.
• Do not expose a battery
pack or appliance to fire
or excessive temperature.
Exposure to fire or
temperature above 265°F
may cause an explosion.
• Follow all charging
instructions and do not
charge the battery pack or
appliance outside the
temperature range of
40-104°F. Charging
improperly or at tempera
tures outside this range
may damage the battery
and increase the risk of
fire.
• Prevent unintentional
starting. Ensure the switch
is OFF before connecting
to the battery pack,
picking up or carrying the
appliance. You are holding
the machine with your
finger on the switch or
energizing an appliance
that has the switch on
invites accidents.
• Under abusive conditions,
liquid may be ejected
from the battery; avoid
contact. If contact
accidentally occurs, flush
with water. If liquid
contacts eyes, additional-
ly seek medical help.
Liquid ejected from the
battery may cause
irritation or burns.
• If the appliance is not
working as it should, has
been dropped, damaged,
left outdoors, or dropped
into water, return it to a
service center.
• Have servicing performed
by a qualified repair
person using only
identical replacement
parts. This will ensure that
the safety of the product
is maintained.
• Do not turn ON your
appliance until you are
familiar with all instruc
tions and operating
procedures.
• Risk of injury from moving
parts. The brush may
start unexpectedly. Turn
OFF before cleaning or
servicing.
• If the appliance is not
working as it should, has
been dropped, damaged,
left outdoors, or dropped
into water, return it to a
service center.
• Have servicing performed
by a qualified repair
person using only
identical replacement
parts. This will ensure that
the safety of the product
is maintained.
• Unplug the charger from
the electrical socket when
not used before cleaning,
maintaining, or servicing
the appliance.
• The liquid must not be
directed towards
equipment containing
electrical components.
• Use only the type and
amount of liquids
specified under the
operations section of this
guide.
• Use only on surface
moistened by the cleaning
process.
• Do not pull or carry the
charger by a cord; use the
cord as a handle, close
the door on the cord, or
pull the cord around
sharp edges or corners.
• The battery pack and
charger base output
terminals are not to be
short-circuited.
• Do not modify or
attempt to repair the
appliance except as
indicated in the
instructions for use and
care.
• The battery must be
removed from the
appliance before it is
scrapped.
IMPORTANT INFORMA-
TION
• Keep appliance on a level
surface.
• If your appliance has a
motorized Brush Roll, do
not leave the machine
running in the same spot
without the fully upright
handle.
5 www.jashen.com

• Do not store where
freezing may occur.
• This product contains a
wireless device. Refer to
the website for regulatory
information. This model is
for household use only.
Commercial use of this
unit voids the
manufacturer’s warranty.
READ ALL INSTRUCTIONS
BEFORE USING YOUR
APPLIANCE.
When using an electrical
appliance, basic
precautions should be
observed, including the
following:
FCC/IC NOTICE: This
equipment has been
tested and found to
comply with the limits for a
Class B digital device,
according to part 15 of the
FCC Rules. These limits
are designed to provide
reasonable protection
against harmful
interference in
a residential installation.
This equipment generates,
uses, and can radiate
radio frequency energy
and, if not installed and
used following the
instructions, may cause
harmful interference to
radio communications.
However, there is no
guarantee that
interference will not occur
in a particular installation.
Suppose this equipment
does cause harmful
interference to radio or
television reception, which
can be determined by
turning the equipment off
and on.
In that case, the user is
encouraged to correct the
interference by one or more
of the following measures:
(1) Reorient or relocate the
receiving antenna. (2)
Increase the separation
between the equipment and
receiver. (3) Connect the
equipment into an outlet on
a circuit different from that
to which the receiver is
connected. (4) Consult the
dealer or an experienced
radio/TV technician for
help. This device complies
with Part 15 of FCC Rules
and Industry Canada
license-exempt RSS
standard(s). Operation is
subject to the following two
conditions: (1) this device
may not cause harmful
interference, and (2) this
device must accept any
interference, including
interference that may cause
undesired operation of the
device.
Le présent appareil est
conforme aux la partie 15
des régles de la FCC et CNR
d’Industrie Canada applica-
bles aux appareils radio
exempts de licence.
L’exploitation est autorisée
aux deux conditions
suivantes :
(1) l’appareil ne doit pas
produire de brouillage, et
(2) l’utilisateur de l’appareil
doit accepter tout brouil-
lage radioélectrique subi,
même si le brouillage est
susceptible d’en comprom-
ettre le fonctionnement.
Privacy of communications
may not be ensured when
using this device.
WARNING: Changes or
modifications to this
equipment not expressly
approved by the party
responsible for compliance
could void the user’s
authority to operate the
equipment.
CAUTION: The Digital
Display houses the
transmitter and must be
kept at a separation
distance of at least 20 cm
from all persons.
ATTENTION: L’écran à
affichage numérique
contient l’émetteur.
Gardez-le à une distance
d’un minimum de 20 cm
de toute personne.
RANGE OF USAGE
The cordless hard floor
cleaner is used on indoor
hard floors, such as vinyl,
tile, sealed wood, etc. Use
on a rough surface may
not get the best
performance.
• Keep your appliance away
from heat sources, such as
a fireplace or heater, to
avoid causing
deformation.
• Do not use to pick up
flammable or combustible
liquids, ultrafine particles,
sharp objects, hazardous
material, chemicals, or
anything burning or
smoking, as described
above.
ABOUT CLEANING
SOLUTION
• A large amount of cleaning
solution entering into the
motor may cause damage
to the appliance.
www.jashen.com 6

WARRANTY
The 1-Year limited warranty may vary by state. Visit jashen.com o r
call+1-877-402-9868 for complete warranty information.
• Add solution as instructed
in the product operation
section. We recommend
using the provided
cleaning solution. Do not
use the product with an
acidic, alkaline solution or
any substances harmful to
the environment.
• Keep out of reach of
children. If any solution
gets into the eyes,
immediately flush them
with clean water. If any
solution is swallowed by
accident, seek medical
care immediately.
• Dirty water and solution
disposal should comply
with local environmental
regulations.
ABOUT THE APPLIANCE
• Do not modify or attempt
to repair the appliance
except as indicated in the
instructions for operating
and cleaning.
• Charge the appliance with
the Jashen adaptor. Input
Voltage: AC 100-240V.
Both high and low voltages
can damage the adaptor,
appliance or even cause
danger to the user.
• Use extra care when
cleaning on stairs.
• Ensure that the Power
Switch is in the OFF
position before picking up
or carrying
• the appliance. Do not lay
flat or lean the appliance
to prevent dirty water from
entering into the motor.
• To avoid being tripped
accidentally, please put
away the appliance on the
charging base.
• Always install the Dirty
Water Tank and Clean
Water Tank properly before
use.
• Do not allow the appli
ance or charger to get wet
to avoid the risk of fire or
injury caused by a short
circuit.
7 www.jashen.com

WHAT’S IN THE BOX?
Standard accessories may vary by model.To identify what should be included with your
purchase, please refer to the “Carton Contents” list located on the carton top flap.
PRODUCT VIEW
A
P
N
O
M
L
K
B
C
D
E
F
G
H
I
J
A: Self-cleaning Button
B: Mode Button
C: Power Button
D: Digital Display
E: Clean Water Tank Release Button
F: Clean Water Tank Handle
G: Dirty Water Tank Release Button
H: Dirty Water Tank Handle
I: Brush Roller Cover Release Button
J: Brush Roll Window
K: Brush Roller
L: Dirty Water Tank (DWT)
M: Floater
N: Clean Water Tank (CWT)
O: Battery Release Button
P: Tube
Handle & Body Brush Rolls Docking Station Hepa
Battery Holder Adaptor Access Holder Cleaning Tool
www.jashen.com 8

Digital Display
Indicator
CWT Empty
Self-cleaning
Icon
Dirty Water Tank
Full or Blocked
MAX Power
Battery Status
Dirty Water Tank
Full or Blocked FILL
CWT
EMPTY
DWT
SELF
CLEANING
BRUSH ROLL
TANGLED
BATTERY
STATUS
POWER
MAX
When in Use Means
Full power
Medium power
Low power
Low power, please charge.
Off: no power or battery malfunction.
Indicator blinking: CWT is empty.
Indicator blinking: DWT is full or channel has a blockage.
Indicator blinking: brush roller is not installed or has a blockage.
Indicator blinking: appliance is in need of self-cleaning.
During Charging
9 www.jashen.com

ASSEMBLY / DISASSEMBLE
Note:
For water tank and brush assembly, please refer to “Operation” and “Maintenance”.
click click
1. Insert the battery into
the body of the machine
until you hear a “click.”
2. Insert the battery into
the body of the machine
until you hear a “click.”
3. Press the spring to
release the handle with a
tool (like a screwdriver)
and lift the released handle
from the appliance.
1. Place your F16 onto the
Docking Station to charge.
2. Plug the adapter into a
suitable wall outlet. The
Battery Life Indicator will
illuminate when charging.
3. For a maximum run
time, charge the machine
for 4hours.
CHARGING THE BATTERY
WARNING
• Only charge the appliance with the adaptor supplied by Jashen.
• To avoid tripping hazards, please place the appliance on the charging base near a wall
during charging.
• During long periods of not being used, the appliance must be charged once every 3
months for optimal performance. It may take 4±0.5 hours for a full charge.
• Store indoors in a dry place. Do not expose the appliance to sunlight or freezing
temperatures.
Recommended temperature range: 39.2°F~ 104°F .
ASSEMBLY DISASSEMBLE
www.jashen.com 10

FILLING THE CLEAN WATER TANK
WARNING
• To reduce the risk of fire and electric shock due to internal component damage, use
only JASHEN cleaning formula intended for use with the hard floor device.
• Only use water under 140F°. DO NOT USE HOT WATER.
4. When deep cleaning is
necessary, add one bottle
cap of the solution to the
CWT and tightly close the
cap.
5. Place the tank back into
the appliance. You should
hear a “Click” if done
correctly.
1. Press the CWT release
button to remove the CWT
from the appliance.
2. Open the tank cap 3. Fill with tap water to the
Max line.
“click”
11 www.jashen.com

1. Recline the machine
Turn the machine ON by
pressing the Power Button.
Next, press the Mode
Button to switch between
the Standard mode and
Max Mode.
2. to start the Brush Roll
spinning. Stand the
machine upright to stop
the Brush Roll from
spinning. * Do not recline
more than 142° to protect
against water leakage.
3. Place the appliance on
the charging base vertically
after use for recharge and
storage.
CLEANING YOUR FLOORS
󾙓󾙖󾙔
ATTENTION:
• Do not vacuum foamed liquid.
• The cordless hard floor cleaner is to be used on indoor hard floors only, such as vinyl,
tile, sealed wood, etc. Use on a rough surface may not get the best performance.
• To vacuum water left on the surface, the appliance will switch off in 3 seconds after
power off.
Emptying the Dirty Water Tank
1. Press the Dirty
Water Tank (DWT)
release button to
remove the DWT from
the appliance.
2. Pull up the tank
lid.
3. Separate the hair
and debris from the
dirty water by
grasping the strainer
tab and pulling up.
Throw the debris
into the trash.
4. Pour the dirty
water into the sink
and rinse the Dirty
Water Tank.
www.jashen.com 11

5. Reassemble the
garbage separator to
the Dirty Water Tank.
6. Reassemble the
tank lid.
7. Place the DWT
back into the
appliance.
“click”
CLEAN FILTER & FLOATER
3. Pull up the tank lid. 4. Rinse the Floater with water.
1. Grasp recessed area on
each side of the HEPA and
pull upward.
2. Rinse under running
water.
3. HEPA must be
completely dry before
reassembling.
13 www.jashen.com

BRUSH ROLLER SELF-CLEANING
REPLACEBATTERY
1. Place the machine on the Docking Station after use.
When self-cleaning icon is blinking, press the
self-cleaning Button to start the process.
2. Once the cycle is complete, the appliance will begin
charging. Empty and clean the Dirty Water Tank
after the cycle is completed.
Note:
• Ensure the charging duck is plugged in.
• Before the cycle, please clean the DWT and ensure
the water level in the CWT exceeds 40%.
Note:
• To reduce the risk of electrical shock, turn Power Button OFF before performing
maintenance or troubleshooting checks.
• For optimal performance and to prevent odors, always clean and dry DWT, floater,
filters, brush roller, brush roller cover completely after each use.
• Please make sure each part is installed correctly or the appliance may not work
properly.
• After maintenance, place the appliance on the charging base vertically. Do not expose
the appliance to direct sunlight, and store it indoors in a dry place.
click
www.jashen.com 14

CLEANING THE BRUSH ROLLER COVER
1. Grab the front handle
while pressing the button
and pull upward to remove
it.
2. Rinse with water. 3. When replacing, always
latch the brush cover into
place to avoid leakage.
“click”
CLEANING BRUSH ROLLER
Remove the brush roller by
grabbing the brush roller
tab and pulling upward.
Using the cleaning tool,
remove the hair and debris
wrapped around the roller.
Remove hair and debris
from the brush roller
chamber.
Remove hair and debris
from the opening with a
tissue or a damp cloth.
Inserting the brush roller
end into the right side of
the holder, then lock the
pull tab into place by
pressing downward.
①
②
15 www.jashen.com

Product
Charging Input
Voltage
Rated Power
Running Time
Charging Time
Water Flow Rate
CWT Capacity
DWT Capacity
Waterproof
F16
100~240V
25.2V 2500mAh
160W
18/25 mins
3.5 hrs
30/100ml per min
0.8L
0.5L
IPX4
STORING YOUR MACHINE
Store F16 in a protected, dry area. Since this product uses water, it must not be stored
where there is danger of freezing. Freezing will damage internal components and may
void the warranty.
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug
from electrical outlet before performing maintenance or troubleshooting on the dock.
NOTICE
To reduce the risk of a leaking condition, do not store machine where freezing may
occur. Damage to internal components may result.
SPECIFICATIONS
www.jashen.com 16

Note:
If the above troubleshooting guide fails to provide a solution, please contact us at
[email protected] or visit our website www.jashen.com for further support.
STORING YOUR MACHINE
Problem Possible cause Solution
The appliance does
not turn on
Weak suction
Brush roller tangled
indicator blinking
CWT empty i
ndicator blinking
DWT full indicator
blinking
All lights off in
operation
Battery indicator
blinking
Self-cleaning icon
blinking
MAX icon blinking
Out of power
Auto protection for overheating
Debris channel is blocked
The HEPA is dirty or not installed
1. The brush roller is blocked
2. The brush roller is not installed
CWT is empty
The dirty water in DWT has
reached the MAX line
Battery overheat or malfunction
Low battery
Brush roller is dirty
Motor malfunction
Charge the appliance
Restart after cooling down
Clean the debris channel and DWT
Clean and dry the HEPA
1. Remove blockages
2. Install brush roller correctly
Refill CWT
Empty the dirty water and
then reinstall the DWT
Cool the appliance down and
restart
Charge the appliance, or restart
Start self-cleaning
Contact Customer Service
17 www.jashen.com

www.jashen.com 18

19 www.jashen.com

www.jashen.com 20

wait, there’s more!
Join us online for a comprehensive walk through of your new product,
including troubleshooting, product registration, parts and more.
Go to support.JASHEN.com
REGISTER INFO VIDEOS PARTS SUPPORT