JASHEN S18X User manual
Cordless vacuum
Owner manual
S18X（JS-AV02A01）
Intelligent Vacuum Cleaner
www.jashen-tech.com
Safety Instrucons…………………………………………………….......…..…...........3
Geng To Know Your Jashen vacuum cleaner…………........…….............5
Assembling your vacuum………………………………………….......….….........….7
Charging your vacuum…………………………………………….....………..........…10
Using your vacuum………………………………………………….....……….........….11
Maintaining your vacuum……………………………………….....……..........…...12
Emptying the Dust Cup
Cleaning the Filters
Maintaining the Brush Roller/So Roller
Checking for Blockages
Troubleshoong guide………………………………………...............................14
Specificaon………………………………………………………..............................15
WELCOME!
Congratulaons on your purchase. Use this instrucon manual to learn about your new
vacuum’s great features. From assembly to use to maintenance, you will find it all in here.
PLEASE READ CAREFULLY AND KEEP FOR FUTURE
REFERENCE
If you have any quesons, please contact our Email with: support@jashen-tech.com
TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK, OR INJURY:
● DO NOT use to vacuum any liquids.
● DO NOT immerse in water when cleaning.
● If handheld vacuum/wand is damaged,
disconnue use.
GENERAL USE
● To avoid fire, explosion, or injury, inspect
baery pack and chargers for any damage
before use. DO NOT use with damaged cord
or plug. If the appliance has been dropped,
damaged, le outdoors, dropped into water,
or is not working as it should, return it to a
service center.
● DO NOT use outdoors or on wet surfaces.
Use only on dry surfaces.
● DO NOT handle charger, including charger
plug and charger terminals with wet hands.
● DO NOT leave vacuum cleaner unaended.
● Always turn off this appliance before
connecng or disconnecng floor nozzle.
● DO NOT incinerate appliance, even if it is
severely damaged, as the power pack may
explode in a fire.
● Keep the vacuum cleaner moving over the
carpet surface at all mes to avoid damaging
the carpet fibres.
● DO NOT place vacuum cleaner on unstable
surfaces such as chairs or tables.
● Keep your work area well lit.
●
DO NOT put any objects into openings. DO
NOT use with any opening blocked; keep free
of dust, lint, hair, and anything that may
reduce airflow.
●
DO NOT allow to be used as a toy. Close
aenon is necessary when used by or near
children, pets or plants.
●
DO NOT use if airflow is restricted; if the air
paths or the floor nozzle become blocked,
turn off the vacuum cleaner and remove the
baery. Clear all obstrucons before returning
the baery to vacuum and powering on
again. Keep floor nozzle away from hair, face,
fingers, uncovered feet, or loose clothing.
●
Store the appliance indoors. DO NOT use or s
tore it below 39.2°F (4°C). Ensure the
appliance is at room temperature before
operang.
●
DO NOT carry the appliance with your finger
on the power buon.
GENERAL CLEANING
● DO NOT vacuum up hard or sharp objects
such as glass, nails, screws, or coins that
could damage the vacuum cleaner.
● DO NOT vacuum up drywall dust, fireplace
ash, or embers. DO NOT use as an aach
ment to power tools for dust collecon.
● DO NOT vacuum up smoking or burning
objects such as hot coals, cigaree bus, or
matches.
● DO NOT vacuum up flammable or combus
ble materials, such as lighter fluid, gasoline,
or kerosene, or use vacuum in areas where
they may be present.
● DO NOT vacuum up toxic soluons (e.g.,
chlorine bleach, ammonia, or drain cleaner).
DO NOT use in an enclosed space where
vapors are present from paint, paint thinner,
moth-proofing substances, flammable dust,
or other explosive or toxic materials.
● DO NOT vacuum up any liquids.
● DO NOT immerse vacuum cleaner in water
or other liquids.
● Use extra care when cleaning on stairs.
IMPORTANT SAFETY INSTRUCTIONS
FOR INDOOR USE ONLY
IMPORTANT SAFETY INSTRUCTIONS
FOR INDOOR USE ONLY
WARNING
READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE), Failure
2www.jashen-tech.com [email protected] 3
IMPORTANT SAFETY INSTRUCTIONS GETTING TO KNOW YOUR JASHEN
VACUUM CLEANER
FOR INDOOR USE ONLY
DUST CUP/FILTERS/ACCESSO-
RIES
● DO NOT use without filter, dust cup, and all
filters in place. Make sure all accessories are
in place aer roune maintenance.
● Disconnect the baery pack from the
appliance before making any adjustments,
changing accessories, or storing the
appliance. Such prevenve safety measures
reduce the risk of starng the appliance
accidentally.
● Make sure that all filters are thoroughly dry
and all accessories are free of blockages aer
roune cleaning.
●
Use only Jashen® brand filters and accesso
ries. Using other brands will void the warranty.
BATTERY PACK
● DO NOT
charge appliance with the power on.
● DO NOT
charge power pack at temperatures
below 50°F (10°C) or above 100°F (38°C).
Charging improperly or at temperatures
outside of the specified range may damage
the Baery and increase the risk of fire.
● DO NOT
expose baery or appliance to fire
or temperature above 266°F (130°C) as it
may cause an explosion. Baery should not
be stored at temperatures below 37.4°F (3°C)
or above 104°F (40°C) to maintain long-term
baery life.
●
Use Baery Charging Dock on flat, stable
surfaces only.
●
Use appliance only with specifically designat
ed baeries and adapter. Use of any other
baery packs or adapter may create a risk of
injury and fire.
●
Must use the original adapter to charge,
otherwise it may damage the machine.
●
When Baery is not in use, keep it away from
all metal objects, such as paper clips, coins,
keys, nails, or screws. Shorng the baery
terminals together increases the risk of fire
or burns. Baery should not be exposed to or
submerged in any water, salt water, or other
liquids.
● Under abusive condions, liquid may be
ejected from the baery pack. Avoid contact
with liquid, as it may cause irritaon or
burns. If contact occurs, flush with water. If
liquid contacts eyes, seek medical help.
● DO NOT
modify or aempt to repair the
appliance or the baery yourself, appliance
should only be serviced by a qualified repair
person using only idencal replacement
parts.
Function Overview
Dust cup
Screen
Ⅰ
.......................
Ⅱ
Dust cup release
LED lights
4www.jashen-tech.com [email protected] 5
GETTING TO KNOW YOUR JASHEN
CORDLESS VACUUM
ASSEMBLING YOUR VACUUM
Assembling the main body
NOTE:
use,
CLICK
CLICK
CLICK
F G
H I
A
B
C
D
E
JL K
6www.jashen-tech.com [email protected] 7
ASSEMBLING YOUR VACUUM ASSEMBLING YOUR VACUUM
Mode switch for Hard floor / Carpet floor
Install the wall-mounted dock
Assembling the battery
Assembling the soft roller (For hard floor)
Assembling the brush roller (For carpet floor)
Hard floor mode: Move the bumper as
illustrated with so roller installed. With big
opening in the front, sucks up large debris
and fine dust from hard floors.
Carpet floor mode: Move the bumper as
illustrated with brush roll installed. Closed space
creates more sucon and direct-drive floor head
clean deep into carpet to remove ground-in dirt.
8www.jashen-tech.com [email protected] 9
Charging and runtime
Installation for wall-mounted dock
Remove rubber stopper for first use
Spare baery holder
(Please purchase the
backup baery separately)
USING YOUR VACUUM
MIN POWER:
AUTO POWER:
MAX POWER:
Filter cleaning alert: Clean filter when this sign light up, ignore this alert may
cause sucon lose and fast drainage of baery.
AUTO mode: This sign will light up when the vacuum turn into intensive
cleaning by detected heavy dirt.
Baery indicator: Shows the remaining capacity of baery.
4hrs
MAINTAINING YOUR VACCUMMAINTAINING YOUR VACUUM
WARNING:
TIP:
EMPTYING THE DUST CUP
•
To empty dust cup, first remove the handheld vacuum from the wand by pressing the Wand
Release buon and pulling up on the handheld vacuum. Posion dust cup over a bin, then
open the boom of the dust cup by pressing the Dust Cup release buon on the side.
CLEANING THE DUST CUP AND FILTERS
•
To clean the dust cup, remove the dust cup from handheld vacuum and rinse with water. Flush
the dirt off as needed. Once dust cup is completely dry, return it to handheld vacuum.
•
To clean the filter, remove the filter from dust cup as illustraon. Rinse with water. Once
completely dry, reinsert the filter to dust cup.
MAINTAINING THE BRUSH ROLLER / SOFT ROLLER
•
Release the brush roller/so roller by sliding the release buon, remove any string, hair, or
debris that may be wrapped around the brush roller/so roller by running scissors along the
guide on the roller.
•
Reinsert the brush roller/so roller to the floor head, unl the release buon click into place.
•
Wash the So Roller as needed, using only water. Air-dry completely for at least 24 hours
before returning it to the brush roller garage.
4
3
1 2
WARNING:
CAUTION:
IMPORTANT:
NOTE:
CHECKING FOR BLOCKAGES: Handheld, Wand,
and Floor Head
•
Turn off vacuum and remove the baery.
•
Remove the wand from the handheld vacuum and check all intake openings.
•
Remove the floor head from the wand and check the wand for blockages.
SPECIFICATION
TROUBLESHOTTING GUIDE
WARNING:
Problem Possible cause Remedies
The appliance
doesn’t work
Hepa cleaning
indicator blinking
Brush Roller/So
Roller does not spin
Weak
sucon power
Abnormal
motor sounds
Baery won't charge
Charging too slow
No power
AUTO protecon for overheated
The sucon mouth is blocked
Dustcup and filters are need cleaning
Brushroll light flashs, indicate floor
head blockage
Roller auto protecon for overheated
Connecon issue between the handheld
vacuum, wand, and nozzle
The pre-filter is not installed
The appliance is blocked(such as tube,
sucon mouth or some other parts)
The brush roller is wrapped by hairs
or fibers
The appliance is blocked(such as tube,
sucon mouth or some other parts)
The adaptor is not correctly inserted
Poor contact of the main body or baery
Wrong charger being used
Temperatures outside of
the specified range
Charge the baery according to
instrucions
Turn off appliance, Restart aer cooling
Check and remove blockages
Empty dust cup and clean filters
Turn off appliance and remove
blockage of floor head
Turn off appliance ,Restart aer cooling
Disconnecng and rub the juncon
point with a so cloth, reaaching
the pieces
Install the pre-filter
Clear blockages
Clean the brush roller
Clear blockages
Reinsert the adaptor correctly
Check if the main body and
baery are correctly placed
Use the original Jashen I type adaptor
Charge the baery when the
terperature above 50°F (10°C)
and below 100°F (38°C)
In any other case or if the soluon explained above did not solve the problem, please contact us
at [email protected]om
Charging Output
4 hrs
WARNING: The above data is from the JASHEN laboratory, the actual situaon may vary
according to the use environment.
Disposal
• The baery contains materials that are harmful to the environment and must be removed
from the appliance before it is discarded.
• When removing the baery, the appliance must be powered off.
• Waste baeries should be handled properly. Do not put them into fire, water or soil.
• If the baery leakage touches the skin or clothing, flush with water immediately to avoid skin
injury and seek medical help.
Visit JASHEN Website：www.jashen-tech.com
Call our Customer Service：1-877-402-9868
This manual suits for next models
1
Table of contents
Other JASHEN Vacuum Cleaner manuals
