JASTEC uvim-W User manual

uvim-W User Manual

uvim-W
•Product Name : uvim-W
•Part Number : JAS-U2-2018
•Serial Number : UW1AC00001(example)
–Position 1~2 : Product Name
•UW, uvim-W
–Position 3 : Wireless option
•WiFi + Bluetooth : 1
•WiFi : 2
•Bluetooth : 3
–Position 4 : Year
•2018 : A, 2019 : B
–Position 5 : Month(hex, 1 ~ C)
•Jan : 1, Feb : 2, Sep : 9, Oct : A, Nov : B, Dec : C
–Position 6~10 : Serial Number
본 문서는 기밀문서로 무단배포 및 유포를 금지합니다.
1

uvim-W Communication Module Components
본 문서는 기밀문서로 무단배포 및 유포를 금지합니다.
2
uvim-W
Communication
Module
USB Cable
Diagnostic
Cable
BOX

uVIM Special Feature
•uvim-W(Universal Vehicle Interface Module - Wireless)
•Power input by USB, DLC or DC.
•Communicate by USB port and wireless(WIFI, BT) of PC
•CAN Communication Function
–CAN 2.0B
–J1939 data acquisition is possible.
•K-LINE communication is possible.
–ISO-14230, ISO9141-2
•RS-232 communication is possible.
•Data recording function is possible.
본 문서는 기밀문서로 무단배포 및 유포를 금지합니다.
3

Components –uvim-W Specification
본 문서는 기밀문서로 무단배포 및 유포를 금지합니다.
4
No Item Specification
1 CASE
Color : BLACK
Material : PLASTIC & RUBBER
Size(mm) : 125(L) X 85(W) X 27(H)
2 CPU STM32F405VG
3 Indication 5x LED
POWER/DLC/USB/WIRELESS/RECORD
4 Power
Vehicle Power(12V ~ 24V)
DC Input(6 ~ 35)
Reset Switch
5 Internal Battery 552030, 280mA/3.8V
5 Internal Memory 8MB Flash
6PC Interface
USB2.0
Bluetooth Class1
WiFi 802.11 b/g/n (Omega Module)
7 Vehicle Interface
CAN 2.0B
- High Speed CAN 2x
- Single Wire CAN 1x
K-LINE 1x
-KWP-2000, 9141-2
L-LINE 1x
VPW/PWM 1x
RS-232 1x
9 Environment -10 ~ 60℃, Humidity below 90%
10 Cable Connector Vehicle’s Diagnostic Connector/Cable
PC Communication Cable : USB Cable(Type A –mini-B)

Components - Cable
본 문서는 기밀문서로 무단배포 및 유포를 금지합니다.
5
Length : 100cm
Material : PVC
16 PIN Main Cable
3M Connector Communication Type
OBD2
1 CAN1,2-H 6
2 CAN1,2-L 14
3 K-line/CAN2 H,L,Single 1
4 K-line/CAN2 H,L,Single 13
5 K-line/CAN2 H,L,Single 7
6 K-line/CAN2 H,L,Single 8
7 K-line/CAN2 H,L,Single 9
8 K-line/CAN2 H,L,Single
9 K-line/CAN2 H,L,Single 12
10 K-line/CAN2 H,L,Single
11 L-line 15
12 J1850-H 2
13 J1850-L 10
14 RS-232 CH1 Tx
15 RS-232 CH1 Rx
16
17
18 GND Open/Short
19 B++ 16
20 GND 4
20 GND 5
3M Connecctor OBD2 Connecctor

Components - USB CABLE
본 문서는 기밀문서로 무단배포 및 유포를 금지합니다.
6
•Length : 150cm
•Material : PVC

Components - BOX
본 문서는 기밀문서로 무단배포 및 유포를 금지합니다.
7
•Size :32 X 23 X16 cm
•Material : Aluminum
•Weight : 2kg
•Product Name : SMATO
N007S-R


uvim-W Communicaiton Module Connecting Method
본 문서는 기밀문서로 무단배포 및 유포를 금지합니다.
8
Connect to notebook by USB
(power on when connecting usb)
Connect to vehicle
Connect to notebook
by wireless

uvim-W Explanation
본 문서는 기밀문서로 무단배포 및 유포를 금지합니다.
9
1. Function Switch
D(Diagnostic Mode)
- PC interface can be used.(The diagnostic software of PC can
communicate with uvim-W).
- The uvim-W can communicate with vehicle and PC software.
R(Recording Mode)
- PC interface cannot be used.
- The uvim-W can communicate with vehicle and save data to micro
SD card.

uvim-W Explanation
본 문서는 기밀문서로 무단배포 및 유포를 금지합니다.
10
1. Power ON Status
- USB is connected.
- DLC is connected and power is input by DLC.
- Power is input by DC.
2. Vehicle interface Status
- When uvim-W communicates with vehicle, DLC led is on.
POWER : Indicates power status
DLC : Indicates vehicle interface status
USB : Indicates usb interface status
WIRELESS : Indicates wireless interface status
RECORD : Indicates RECORD mode status.
3. PC interface Status
- When uvim-W communicates with USB, USB led is on.
- When uvim-W communicates with Wireless, Wireless led is on.
1. LED Status
4. Record Status
- When uvim-W function switch is “R” and communicates with
vehicle, RECORD led is on.

uvim-W USB Driver Recognition
11
Windows 7/8/8.1/10
1. Install “Setup_Jastec_uVIM_Driver_V1.1.exe” and connect uVIM USB Cable with PC.
2. Device Setup is automatically started as below.
3. After Device Setup is completed, check the status of JASTEC Virtual COM Port from Device Manager.
<Picture 1> <Picture 2>
If it shows like picture 1 from Device Manager, you need to re-start driver updates.
If it shows like picture 2 from Device Manager, it means that driver has installed.

uvim-W USB Driver Recognition
12
4. In case of JASTEC Virtual COM Port is shown as
yellow exclamation mark from Other devices, you
need to re-start driver update.
5. When you select Update Driver Software, Driver
Searching screen will be shown. At this time, click ‘Search
automatically for updated driver software
6. Check the status of installation of Driver
<Picture1> <PIcture 2>
If it shows like picture 1, it means that driver has installed.
If it shows like picture 2, you need to re-start ‘Update Driver Software’ (step 4).

uvim-W USB Driver Recognition
13
7. This time, click ‘Browse my computer
for driver software.’
8. Click the folder that Diagnosis Program is installed from
‘Browse for driver software on your computer’.
Diagnosis program installed location is as below.
In case of 32bit OS : c:\program files\xxx
In case of 64bit OS : c:\program files(x86)\xxx
9. When you click ‘Next’ button from above screen, ‘Windows
Security’ will be shown as below. At this time, click 'Install this driver
software anyway.’
10. If it shows as below, it means that driver is installed.

uvim-W USB Driver Recognition
본 문서는 기밀문서로 무단배포 및 유포를 금지합니다.
14
11. Jastec Virtual COM Port is shown in Device manager.

uvim-W Communicaiton Module Block Diagram
본 문서는 기밀문서로 무단배포 및 유포를 금지합니다.
15
Connect to
vehicle
Connect to PC by
USB or Wireless

Instruction for uvim-W use
1. Connect uvim-W to PC
•Connect Wireless(WiFi or BT) or USB.
•If you connect by USB, process below step.
•Install a driver (Refer to pg 10) to find a uvim-W driver on PC
•uvim-W will be identified as Jastec Virtual Comport (refer to pg 13).
2. uvim-W Setting
•uvim-W will be set to connect to vehicle ECU through serial interface in CAN, K-line Protocol
3. Vehicle Communication
•uvim-W setting & ECU Communication shall be operated as follows.
본 문서는 기밀문서로 무단배포 및 유포를 금지합니다.
16
ECU uVIM PC App
Connect through CAN line, K-line Connect with USB Cable
uvim-W Setting Request
uvim-W Setting Response
Send a request Vehicle data
Send a request vehicle data
in configured protocol
Receive a response vehicle data Receive a response
vehicle data through
serial interface

ETC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
FCC Part 15.21 statement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment.
The antenna(s) must be installed such
that a minimum separation distance of at least 20 cm is maintained between the radiator (antenna) and all
persons at all times. This device must not be collocated or operating in conjunction with any other antenna or
transmitter.
본 문서는 기밀문서로 무단배포 및 유포를 금지합니다.
17