Jaycar Electronics QC3624 User manual

Wireless Video Door Phone
Installation and Operating Instructions
Model: QC3624
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT
AND KEEP THIS MANUAL FOR FUTURE REFERENCE.

1
CONTENTS
INTRODUCTION .............................................................................................. 2
IMPORTANT SAFETY PRECAUTIONS.....................................................................2
KNOWING YOUR DEVICES ............................................................................ 3
DOOR UNIT..............................................................................................................3
ANSWERING UNIT...................................................................................................
..................................................................................
4
KNOWING THE SCREEN ICONS.............................................................................5
MOUNTING THE DOOR UNIT 7
KNOWING THE MAIN MENU......................................................................... 10
ADVANCED SETTINGS................................................................................. 11
CAMERA SETUP....................................................................................................11
RECORDER SETUP...............................................................................................12
SETUP MASKING AREA...................................................................................14
EVENT LIST ...........................................................................................................15
DATE ................................................................................................................15
TIME .................................................................................................................17
FILE ..................................................................................................................19
SYSTEM SETUP ....................................................................................................20
ALARM BUZZER ....................................................................................................22
PAN TILT ZOOM .....................................................................................................
..................................................................................
...........................................................................
23
SCAN ACTIVATED CAMERAS................................................................................24
MEMORY CARD OVERWRITE ...............................................................................25
PC PLAYBACK SOFTWARE.......................................................................... 26
SEC24 MEDIA PLAYER INTRODUTION.........................................................................26
SOFTWARE INSTALLATION 27
PLAYBACK RECORDED FILE(S) 29
ADDING ADDITIONAL CCTV CAMERA .................................................................31
PRODUCT SPECIFICATION .......................................................................... 32
STORAGE MEDIA MANAGEMENT.........................................................................32
WHAT YOU GET
• Digital Wireless 7" Touch LCD Answering Receiver X1
• Digital Wireless Door Unit X1
• 12V/1A Power Adaptor for the Door Unit X1
• 5V/1A Power Adaptor for the Answering Receiver X1
• DC Power Cable X1
• Unlock Connection Cable X2
• Water Resistant Plug X2
• Mounting Bracket X1
• Mounting Pack X1
• Anti-Thief Screwdriver X1
• PC Player Software CD X1

2
INTRODUCTION
I
IMPORTANT SAFETY PRECAUTIONS
Damages caused by non-compliance with this operating manual will void the warranty! We will
not assume any liability for damages to items or persons caused by improper handling or non-
compliance with the safety notices! Any warranty claim will be null and void in such cases.
1. Do not drop, puncture or disassemble the camera; otherwise the warranty will be voided.
2. Avoid all contact with water, and dry hands before using.
3. Never tug on the power cords. Use the plug to unplug it from the wall outlet.
4. Do not expose the camera to high temperature or leave it in direct sunlight. Doing so may
damage the camera or cause camera temporary malfunction.
5. Use the devices with care. Avoid pressing hard on the camera body.
6. For your own safety, avoid using the camera or power off the camera when there is a storm or
lightning.
7. Remove the power adapter during long periods between usages.
8. Use only the accessories and power adapters supplied by the manufacturer.
9. To meet the regulations pertaining to parental responsibility, keep the devices out of the reach
of infants.
10. Check power cables, do not get crushed or damaged by sharp edges whenever the devices are
in operation.
PLEASE READ BEFORE YOU START
Always use discretion when installing CCTV equipment, especially when there is perceived
policy. Enquire relevant local regulations applicable to the lawful installation of video recording/
surveillance. Third party consent may be required.
WIRELESS DEVICES OPERATING RANGE
Ensure the signal reception viewed from the wireless camera(s) is the best possible reception
between the camera(s) and the Wi-Fi router. If necessary, reduce the distance between the
camera(s) and the Wi-Fi router to improve overall system performance. Wireless Color Camera
Recordable CCTV Kit operating on a secure digital 2.4GHz frequency which could greatly
reduce interference from product such as wireless routers, cordless phones or microwave
ovens.
CAUTION
•This product is designed with built-in high sensitivity microphone. Please keep the door unit away from
the answering unit at least 3 to 5 meters, otherwise continuously howling will occur. Please volume
down if short distance use is needed.
•Do not insert or remove SD Card when the system is in operation. This may cause system malfunction.
e.

3
KNOWING YOUR DEVICES
DOOR UNIT
Item Function
1 Antenna
2 Speaker
3IRLED
4EDS
5 Call Button
6 Microphone
7 Pairing Key
8 Battery Compartment
Item Function
9 Dry Contact Output A
10 Dry Contact Input
(for DC Power Cable)
11 Dry Contact Output B
12 Power Adaptor
13 DC Power Cable
14 Unlock Connection Cable
Note:
1. The door unit can operate in Battery mode or DC mode. In Battery mode, it requires 6 x
AA batteries to operate (which are not included).
2. Low battery may cause system malfunction. Please replace battery in time.

4
ANSWERING UNIT
Item Function
1 Wirelless Signal Indicator
2 Power Indicator
3 Microphone
4Antenna
5 Power Button
6Speaker
Item Function
7 Flip-out Stand
8 Micro SD Slot
9
10
Reset
11
AV Out Jack
Adaptor Plug
Note:
When using A/V cable connecting the receiver to TV, the display on receiver will not be
available and answering visitor function will also be turned off until disconnecting A/V cable
from the receiver.

5
KNOWING THE SCREEN ICONS
Item Function
1 Channel Number
2 Active Voice Channel
3 Wireless Signal Strength
4 Camera Battery Capacity
5 Channel Status
6 Recording Countdown
Indicator
7 Receiver Battery Status
8 System Time Information
9 Record Status

6
System Tray Icon
Icon image Name Function
System Tray System Tray-Hide & display tray icon
Channel Display Press to switch display channel
Two Way Audio Press to start/stop communication.
Door Control Press to open the door (Dry Contact B)
Gate Control Press to open the gate (Dry Contact A)
Volume Press to adjust receiver volume
Record
Press to start/stop recording
Setup Press to enter setup menu
Note:
1. Record function cannot be stopped unless the
countdown OSD completes
3. Users cannot switch channel to another camera
when recording function is active.
CAUTION
．By default, the monitor screen will be ALWAYS ON. If you want to save power
consumption, please setup the idle mode in 'System Setup' sub-menu. ('System Setup' >
'Power Saving' > 5Minutes/10Minutes/ALWAYS ON).
2. Receiver starts to record for 1 minute when a visitor
presses the doorbell. If users answer the visitor, one
more minute will be recorded.

7
MOUNTING THE DOOR UNIT
Installation via Battery Power Mode
1. First insert six AA batteries (not included) according to the
polarity (+/-) indicator on the door unit.
2. Optional: The door unit has been paired to the receiver by
factory default. If you need to pair the door unit to the system
again, please go to "Advanced Settings / Camera Setup" for
more details.
3. Door unit is now ready for use.
Step1
Use the sunshield as a template
to drill 4 suitable holes and attach
the sunshield to the wall with the
screws and wall plugs (supplied).
Step2
Install the back panel (with batteries
inserted) to the door unit with the
correct screws (supplied).
Step3
Position the door unit into
the sunshield and finish
the installation with the
two anti-theft screws
(supplied).
BEFORE YOU START
•
•
•
Before installing the door unit, please first check to make sure the location is suitable for the
installation.
To avoid possible damages, the installation location should free from excessive moisture, dust
and vibration. For optimum transmission performance, avoid installing the door unit directly or
near metallic building materials. Excessive numbers of network access points, such as Wi-Fi
routers will also reduce the wireless transmission performance.
There are two ways to supply power to the door unit, either via batteries or DC power. The battery
power mode offers pure convenience, especially when no power source near by the installation
location. If door unlock function (3rd party door lock with own power supply required) is required,
please install the door unit via DC power mode only. Please note that both sets of dry contacts for
the door locks (not supplied) do not supply any power.
Put in 6x “AA” 1.5V batteries
Pairing
Key

8
INSTALLATION VIA DC POWER MODE
1. Remove the back cover of door unit.
2. (Optional) The door unit supports two types of third-party locks, 4-wire type and 2-wire type (please
note the door unit do not supply the power to the 3rd party locks). If you want to control the door
lock via the receiver, please follow the wire connection method in the figure above.
r wire to the terminal block with
"DC+" symbol. Connect the Black power wire to the terminal block with "DC-" symbol. Then plug
the power adapter to the DC IN jack and wall outlet.
4. Optional: The door unit has been paired to the receiver by factory default. If you need to pair the
door unit to the system again, please go to "Advanced Settings / Camera Setup" for more details.
5. Install the door unit in proper location.
Dry Contact A - Related icon
Dry Contact B - Related icon
A. 4-Wire Type Connection Diagram Power
Power
Input
B. 2-Wire Type Connection Diagram
Adaptor connect to DC Jack
Step1
Use the sunshield as a template
to drill 4 suitable holes and attach
the sunshield to the wall with the
screws and wall plugs (supplied).
Step2
Install the back panel to the door
unit with the correct screws
(supplied).
Step3
Position the door unit into
the sunshield and finish the
installation with the two
anti-theft screws (supplied).

9
MOUNTING THE THE ANSWERING UNIT
1. Connect the power adapter to the
DCIN jack and the nearest wall
outlet.
2. Press [Power Button] for two
seconds to turn on the receiver.
Note:
When using A/V cable connecting the receiver to TV, the display on receiver will not be
available and answering visitor function will also be turned off until disconnecting A/V cable
from the receiver.

10
KNOWING THE MAIN MENU
Item Function
1 CAMERA SETUP
2 RECORDER SETUP
3 EVENT LIST
4 SYSTEM SETUP
5 ALARM BUZZER
6 PAN TILT ZOOM
7 SCAN ACTIVATED CAMERAS
8 MEMORY CARD OVERWRITE
9 RETURN TO LIVE VIEW

In this section you can pair and adjust the brightness setting for
door unit and optional CCTV cameras (for more information on
where to purchase the additional CCTV camera please contact
vendor).
Please note, channel 1 is dedicated to door unit only. Additional
CCTV cameras are to be paired to channel 2, 3 and 4.
By default the video of the door unit is in full screen mode and
with additional CCTV cameras added to the system the receiver
display will automatically be in quad mode.
For any reason you need to re-pair the door unit to the receiver,
please first tap on channel 1 and select pair. You will have 30
seconds to press the pair-key, which is located in the back of the
door unit (see "mounting the door unit" section for more detail).
"Pairing Fail" will be displyed if pair-key not pressed within the 30
seconds period (please make sure the door unit is correctly
powered), tap on pair icon to re-initiate the pairing process again.
11
ADVANCED SETTINGS
CAMERA SETUP
Item Function
1
CH1 (Doorphone 1)
- Pair
- Brightness
2-4
CH 2, CH3, CH4
(CCTV Camera)
- Pair
- Brightness
- Camera On/Off
5 Return to Setup Menu

12
RECORDER SETUP
Item Function
1
Record Schedule (24 hours)
- M = Motion
- S = Schedule
- X = Manual
2Motion Detection Sensitivity
- LV 1 / LV 2 / LV 3
3Memory Card Erase
- Tap to start for matting
4Setup Masking Area
- 8 x 6 Grid
5 Return to Setup Menu
1. Each motion recording time is 2 minutes.
3. Users can stop manual record by themselves. Recording will be stopped after 10 minutes if
users do not stop it.

13

14
SETUP MASKING AREA
1. Save & Exit
2. Block grid
3. Unblock grid

15
EVENT LIST
1. Previous Page
2. Next Page
3. Return
4. Folder (Date)
DATE

16
Press folder and hold on 2 seconds
5. Delete
6. Cancel
Date Folder

17
TIME
1. Return
2. Folder (Time)
3. Delete
4. Cancel
Press folder and hold on 2 seconds

18
File
5. Previous Page
6. Next Page
7. Return
8. File
9. Delete
10. Cancel

19
FILE
1. Tray Icon Expand/Hide
2. Backward
3. Pause/Play
4. Forward
5. Display Channel
6. Stop Playback and Back to Folder
7. Time Stamp Information
8. Channel Status
9. Play Status