Jaycar Electronics AC1714 User manual

4 x 2HDMI Matrix
Switcher Splitter – AC1714
User manual

1
Introduction
This is a high performance HDMI Matrix with 4 x HDMI inputs & 2 x HDMI outputs. It allows any 4
connected source (Blue-Ray player, HD DVD player, console, etc.) to be shown on the any of the two
displays simultaneously, and supports 4K×2K, 3D, 12-bit Deep Color. With its 3Gbps bandwidth and
the additional features of the latest HDMI standards you can be sure of great HDMI distribution.
Features
1. HDMI 1.4a video format support up to 4K x 2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz
2. 3D video support including Frame packing for all 3D formats up to a 297MHz TMDS clock.
3. Supports deep color up to 48-bit per pixel.
4. HDCP 1.4 support (INPUT), HDCP v1.4a protocol compliant (OUTPUT).
5. Supports the reception of any audio data conforming to the HDMI specification 1.4 such ad
L-PCM at up to 192kHz,compressed audio(IEC 61937),DSD,DST,DTS and HBR
6. Supports EDID control via EDID Selector.

2
Package
1. HDMI Matrix ------------------------------------------------------------------------------------ 1PCS
2. 5V1A DC Power Supply adaptor ------------------------------------------------------------- 1PCS
3. Operation Manual ------------------------------------------------------------------------------- 1PCS
4. Remote controller---------------------------------------------------------------------------------1PCS
Specifications
1. Frequency Bandwidth 2.97Gbps
2. Input Ports 4 x HDMI Female input ports
3. Output Ports 2 x HDMI Female output ports
4. Power Supply DC 5V 1A
5. ESD Protection Human Body Model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
6. Dimensions (mm) 85(W) X 192 (D) X 26 (H)

3
Operation controls and Functions
Front Panel
1. ON/OFF: Power on/off switch.
2. POWER LED:This red LED illuminate when the device is connected to power & switched on.
3. IR IN: Remote control receiver.
4. OUTPUT A:Press this button to select input sources to HDMI OUT A，and the LED will
indicate the corresponding input source.
5. OUTPUT B:Press this button to select input sources to HDMI OUT B，and the LED will
indicate the corresponding input source.

4
6. EDID Selector: Select HDMI output signal format use the EDID Selector.
Number EDID Selector Video / Audio Format Number EDID Selector Video / Audio Format
1 0000 1080p / Stereo Audio 2.0 10 1001 4K2K / Stereo Audio 2.0
2 0001 1080p / Dolby/DTS 5.1 11 1010 4K2K / Dolby/DTS 5.1
3 0010 1080p / HD Audio 7.1 12 1011 4K2K / HD Audio 7.1
4 0011 1080p / Stereo Audio 2.0 13 1100 Reserve
5 0100 1080p / Dolby/DTS 5.1 14 1101 Reserve
6 0101 1080p / HD Audio 7.1 15 1110 Reserve
7 0110 3D / Stereo Audio 2.0 16 1111 Auto mode (Default)
8 0111 3D / Dolby/DTS 5.1
9 1000 3D / HD Audio 7.1

5
Rear Panel
1. HDMI OUTPUT: These sockets connect to a HDTV or monitor using HDMI cable.
2. HDMI INPUT:These sockets connect to HDMI source’s output, i.e. from DVD player, game
console, etc
3. DC IN: Plug the 5V DC power supply into the unit and connect the adaptor to AC wall outlet.

6
Application Example

7
Remote control
OUTPUT A: Press IN1\IN2\IN3\IN4 button to select input source to HDMI
OUTPUT A, and the LED will indicate the corresponding input source. Press
button OUTPUT A will cycle from input IN1\IN2\IN3\IN4.
OUTPUT B: Press IN1\IN2\IN3\IN4 button to select input source to HDMI
OUTPUT B, and the LED will indicate the corresponding input source. Press
button OUTPUT B will cycle from input IN1\IN2\IN3\IN4.
IMPORTANT:
- Never attempt to open, repair or modify any part of this unit or its accessories.
- Never get any part of the device or its accessories wet.
- Failure to adhere to these points will result in a void of warranty.