manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Jaycar
  6. •
  7. Cell Phone Accessories
  8. •
  9. Jaycar QC8068 User manual

Jaycar QC8068 User manual

Selfie Pole
With Bluetooth® Wireless
Technology
User Manual
QC8068
Box Contents:
1 x Selfie Pole
1 x Small Smartphone Bracket
1 x Large Smartphone Bracket
1 x USB Charging Cable
Operation:
1.0 Bluetooth Pairing:
1.1Switch the power button to “ON”, which is
located on the rear of the Selfie Pole.
The blue LED light on the rear of the unit will start
to flash for 3 minutes indicating the Selfie Pole is
sending out Bluetooth® signal.
1.2 While the blue LED light is flashing, go to
the Bluetooth® menu on your smart phone.
Turn on your Bluetooth® and search for the
Bluetooth® device “QC8068”
1.3 Select “QC8068”, when the phone asks if you
want to pair with it confirm by selecting yes or ok.
1.4 When the pairing is completed, the blue
LED light will stop flashing and will turn off.
Please Note: If you want to use the Selfie Pole
with another phone, please switch off the Selfie
Pole and the Bluetooth® of the phone currently in
use.
2.0 Installing Your Smart Phone:
2.1 Place your smart phone in to the correct
phone bracket according to the size of your smart
phone.
2.2 Select either photo or video mode on your
smart phone.
2.3 Extend the Selfie Pole to your desired length
and adjust the screw so that your phone is locked
into position.
2.4 Press the photo or video button to start
shooting selfies
Please Note: When the smart phone is in video
mode, use the “photo/video” button which will
start and stop the video recording.
3.0 Charging:
3.1 If the blue LED light does not flash after
turning the unit on and the phone does not
respond to pressing the photo / video button
after pairing, it means that the battery is flat.
Please connect the Selfie Pole via the USB
charging cable provided and plug into a USB port
of a PC or a USB power adaptor (not included) to
charge. The LED light on the Selfie Pole will turn
red while charging, and will go off after the
battery is fully charged. The charging time is
approximately 1 hour.
Specifications:
Running Time: Up to 10 hours
Charging Time: 1 hour
Standby Time: Up to 100 hours
Supports: iOS® 4.0 +,
Android 3.0 +
Battery Capacity: 45mAh
Maximum Load: 500g
Dimensions: Extends from 235 to 1015mm
Distributed by:
TechBrands
Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere
NSW 2116 Australia
Ph: 1300 738 555
Int’l: +61 2 8832 3200
Fax: 1300 738 500
www.techbrands.com

Popular Cell Phone Accessories manuals by other brands

HP PhotoSmart user guide

HP

HP PhotoSmart user guide

Valore AC14 user manual

Valore

Valore AC14 user manual

Nokia AD-5B user guide

Nokia

Nokia AD-5B user guide

Bauhn ABSS-1222 user guide

Bauhn

Bauhn ABSS-1222 user guide

ReSound Phone Clip+ user guide

ReSound

ReSound Phone Clip+ user guide

Mpow ISNAP X1 manual

Mpow

Mpow ISNAP X1 manual

Zartek Mobile ZA-350 user manual

Zartek Mobile

Zartek Mobile ZA-350 user manual

Playbrush Playbrush manual

Playbrush

Playbrush Playbrush manual

X-cam X-CAM T3 instructions

X-cam

X-cam X-CAM T3 instructions

SanDisk iXpand user guide

SanDisk

SanDisk iXpand user guide

Motorola PMLN7018 user guide

Motorola

Motorola PMLN7018 user guide

Nokia 8110 installation instructions

Nokia

Nokia 8110 installation instructions

Philips DLA63005 brochure

Philips

Philips DLA63005 brochure

Sony SCR44 user guide

Sony

Sony SCR44 user guide

AIPTEK MobileCinema i15  Brochure & specs

AIPTEK

AIPTEK MobileCinema i15  Brochure & specs

Sony headphone operating manual

Sony

Sony headphone operating manual

maktar Qubii user guide

maktar

maktar Qubii user guide

IndieVice Pro user manual

IndieVice

IndieVice Pro user manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.