JBL CSS8008 User manual

CSS8008 INSTALLATION INSTRUCTIONS
Commercial Series Ceiling Speaker
1. Install according to diagram.
2. Connect leads according to Tap Wiring chart.
3. Cut off bare portion of unused leads and
terminate with wire nuts.
Note: Always install in accordance with applicable
electrical and building codes.
Tap Wiring:
Orange Green Gray Yellow Black
25V 0.7W 1.3W 2.5W 5W COM
White Blue Brown Orange Black
70V 0.7W 1.3W 2.5W 5W COM
100V 1.3W 2.5W 5W N/C COM
Ceiling Material
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
CSS8008 Instr 06/10
CSS8008 Speaker
Speaker screws (sheet metal screws)
M4 x 40 mm (4 places, packaged with
speaker)
Install screw through thru-hole in
speaker, screw into clip nut in back can
Tile Rails CSS-TR4/8 (x2)
Secure to ceiling/grids in manner required
by local building code.
Back Can CSS-BB8
Back Can / Tile Rail screws (machine
screws) M4 x 8 mm (4 places, packaged
with back can)
Install screw through thru-hole in
back can, and screw into tile rail.