TOP
BACK
Please visit jblpro.com/eonone for complete documentation.
JBL Professional 8500 Balboa Blvd. Northridge, CA 91329 USA © 2016 Harman International Industries, Incorporated
I
A
B
C
D
F
H
E
G
J
K
M
R
S
Q
P
O
N
L
Power LED
Treble
Bass
Reverb Level
Reverb On/Off
Mic/Line Buttons
Power Receptacle
Channel Volumes
XLR-1/4” Combo Inputs
Limit LED
Bluetooth LED
Bluetooth Pair Button
Stereo 1/4” Line Inputs
Power Switch
Stereo RCA Line Inputs
Stereo 1/8” Line Input
RCA Monitor Outputs
Monitor Out Volume
Master Volume
PLUG IN THE INPUTS
1. Turn the Channel Volume Controls (E)
and Master Volume Control (L) all the
way to the left before connecting any
inputs.
2. Connect your device(s) via the input jacks
provided and/or Bluetooth.
3. If CH1 or CH2 input is being used, select
MIC or LINE via Mic/Line Button (F).
SET OUTPUT LEVEL
1. Set the level for the inputs using the
Channel Volume Controls (E) . A good
starting point is to set the pot(s) at 12
o’clock.
2. Slowly turn the Master Volume Control
(L) to the right until the desired volume is
reached.
POWER IT ON
1. Confirm the Power Switch (S) is in the
OFF position.
2. Connect the supplied power cord to the
Power Receptacle (H) on the rear of the
speaker.
3. Connect the power cord to an available
power outlet.
4. Flip on the Power Switch (S); the Power
LED (I) and the Power LED on the front of
the speaker will illuminate.
