Jeco FCL022 User manual

Currentinstructionsat www.jeco-inc.com 1-800-893-3006 Page1of3
PartsList:
A.Top PotQty:1 B. BottomQty:1 C.PumpQty:1
ThanksforshoppingwithJeco

3PotswithPatternFountain
SKU#FCL022/15030034
1-800-893-3006
Ontario
,
CA
91761
MadeinChina
If you havequestionsregarding thisproduct, call
1-800-893-3006Mon.-Fri.9:00-5:00PST
(California)andaskforourproductspecialists,or
e-mail: [e-mail]
SeemanymoreproductsontheInternet!
www.jeco
-
inc
.com

Currentinstructionsat www.jeco-inc.com 1-800-893-3006 Page2of3
ToAssemble:
Step 1: Routethe pre-assembledwaterhose onthetoppot(A) tothebottom(B).
S
tep
2:
Carefully attach thepump (C) tothehose,makingsuretoplace thepumpinthe
center ofthebottom(B).
Step 3:
Fill thebasin (B) with cleanwater,making sure the pump(C)is fully submerged.
Note: Themaximumwater levelshouldbeapproximately 1.2inches belowthe topedgeof
the basin (B).

Currentinstructionsat www.jeco-inc.com 1-800-893-3006 Page3of3
Step 4: Finally, connect theplug ofpump(C) toaGFCIoutlet.
WARNING: Alwaysdisconnect the pump(C)before placingyour handsin thewater.
CAREANDMAINTENCE
lToeliminate thepossibility ofwater damageto areasaround thefountain,checkfor
leaksandexcessive splashing afterthe initialset up ofthefountain.Itis highly
recommendedthis fountain beplacedin anareawhere it cannotbedamaged.
lDo notleave thefountainrunningforextendedperiodsoftime when no oneis present
to observetheperformance.
lCheckthe areaaroundthe fountain onaregular basis toensure thereisno leakage.
lDo notattendtoattemptto movefountainoncefilledwith water.